Counting matching models…
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
Print approx. €11.95–€14.61 excl. taxPreliminary estimate for one variant
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Der original Drehknopf lässt sich schlecht greifen, erst recht mit Handschuhen. Hier eine verbesserte Version: Nicht glatt sondern geriffelt, etwas größer und mit schwarzem Index. Der Knopf wird einfach auf den alten Knopf gesteckt.…
Description The Lockheed Martin F-35 Lightning II is an American family of single-seat, single-engine, stealth multirole combat aircraft designed for air superiority and strike missions; it also has electronic warfare and intelligence,…
Smoothed and fancied remix of this light switch lock. https://www.thingiverse.com/thing:243827 Sorry about the bad quality of my own print, I'm still calibrating it in a new environment. Lay flat and use tree support for the best results…
(ENG) It happened to me relatively soon that the lighting stopped working on my QIDI Q1 printer. The LED strip was bad. Probably thanks to the high temperatures, who knows... Based on a suggestion by @Damien_304779 I made my own version…
As all the other battery holders did not seem to work for me I made my own. V1: has hooks to hold on to the frame. V2: slides ove the frame so won't pull off in a crash.
With this space saving stand you have lots more space on a AV rack to put on your converters for the job. It is universal for all well known rental used converters between a thickness of 17 to 30mm (from 11/16 to 1 3/16). there is Velcro…
I broke my Air65 canopy and didn't want to wait for shipping of a new one. I've seen a similar model to this one on the internet for other cameras, and I couldn't find a light weight canopy for the betafpv CO3 camera that I could use, so…
Does NOT work with the Scimitar RGB as it has different layout for the main buttons and screws. Unfortunately, without buying one I cannot make a model specifically for that one. It works with Scimitar RGB Elite, and should work with…
Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters) Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download
Gridfinity 1x2 Slim Clipper Lighter Stand (10 lighters) Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download
Dying Light is one of my favorite games. I made this as an ode to it, as it's the first weapon you receive in the game. The STL is just the model, and it's not quite to scale, but the 3mf is ready to slice, and to scale. If importing the…
Here is my creepy Halloween Tree Monster. In the original scale you can put it over an LED tealight with 40mm diameter or to put a fairy light inside (with cutout for the wire at the backside). Its made for easy printing, but you will…
I designed this for my Govee LED Light Strips, so I can easily cast the light upwards towards the wall at an angle for some accent lighting. There are holes equally spaced apart for securing to a surface via screws or nails. The strips…
A cool little tealight holder with inserts for changing the design. If insert is too loose, upscale it to 3-5% or downscale the base 3-4%
Distributed Design Market Platform https://distributeddesign.eu/talent/1085/ OpenSCAD file available.
This is a replacement headlight dust cap for hyundai car.
I've completed the LED lighting frame published by Daniel (thanks to him) with a support for AMS that allows you to remove the glass cover without removing AMS. This allows efficient heat dissipation when printing PLA and other materials…
EN I designed this sliding cover so that the lights of the Vodafone ConnectBox (Compal CH7465) don't disturb my sleep. Preferably in dark filament so that no light gets through. When attaching it, press it down evenly so that no layer can…
If all your houseplants are dying and only artificial plants are an option, then this tea light is perfect for you. The flower shape creates a unique shadow. It can be printed in two colours. Ensure good print bed adhesion when printing.…
Originally design as a Bracket to hold long LED lights I bought online under a shelf, but can be used for various things. It slips over a shelf and it has a tightening screw to hold item inside in place. It was design to fit shelves 16mm…
These brackets are designed to attach sections of EMT (electrical conduit) together for an outdoor project. The OnShape source at…
A remix of Printojet's amazing design. Strong enough to be used without the front bar support with 2 sets of stiff springs. Bolt fork much stronger to cope with sudden joystick end-of travel bumps. Designed to have no flex with PLA <40%…
my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports
Print with Supports. I used SunLu PETG 0.28 layer height 0.6 mm nozzle 90% extrusion factor (Klipper) getting the supports off the bottom was a bit difficult. I found lightly prying at all the edges makes the internal support come off in…
Hi after purchasing an orange bobiba for prusament, I was struck by the beautiful honeycomb pattern perforated on the sides. As I could not find a solution to comfortably store the filament with the third-party clips protruding from the…
I hope, you find this useful. I would be glad for some small donates for my work (-; If so, click on the "Tip Designer" button If you want to have the name changed, please contact me. I would be happy about a coffee tip per PayPal.…
Thanks to the open source Titanic model, as the basis for the design of the Titanic-themed night light. The easiest way is to buy electrical parts designed specifically for a ring light, Provides easy installationwithout the need for…
UK Holder for IKEA STYRBAR. Model adapts the original to cover UK light switches completely. Uses existing hardware. Still gives access to light switch if needed. Printed with supports on Creality K1 Creality Hyper PLA white 0.16 layer…
diffusor for the printed Prusa LED-Light Rail from Lord_Syrus: https://www.printables.com/model/132588-u-channel-for-sethbons-led-prusa-light-bar print in white PLA and attach with glue
This is a little mudguard for the iflight Nazgul HD / iflight XL5 V5. I got a Caddx Vista System sitting in the back and wanted to protect it from wet grass etc. It clips right on the Standoffs. For the right Side just mirror the Design.…
The stairway lighting controller RL-Step-02 I found on Amazon to illuminate step by step the stairs. That looks very good - but it is delivered of course with a lot of cables and with a not very nice power supply with additionally…
Diameter and weight 2wall loops 15% infil- Star1 small 118mm, 11g Star1 big 153mm, 20g Star2 small118mm, 10g Star2 big 153mm, 20g HolderA 19mm, 9g HolderB 32mm, 12g HolderC 42mm, 20g
This is the multi-part version of the lightsaber. It has been broken into different parts so they can be printed separately in different colors then glued together. There are locators for making the parts easy to glue on. The cap is…
Taking the things GOTHIC LANTERN https://www.thingiverse.com/thing:2395716 and CHAIN GENERATOR https://www.thingiverse.com/thing:28405 I built a complete lamp, by adding a new thing for base and leds light, that is connected to 220Vac…
Bold lines and sharp edges define this 3D-printed lighter case, inspired by the energy of the techno scene. With a futuristic, industrial feel, this lightweight, fast-to-print case is perfect for those looking to make a statement. This…
Add this charge port highlight for your North American Hyundai Ioniq 5 to make it easier to see the charge port at night, especially with the bright charge indicator LEDs to the right that wreck night vision. Print instructions Recommend…
Remix of simple hole cover that should be compatible with any AeroGarden product. Additional layers on the top of the cover (base of the print) completely block out the light, reducing the possibility of algae growth in the water…
A chic and stylish way to display your tealights! These Nordic tealight holders are the perfect way to add a touch of elegance to any room ❤ Three diferent sizes Tealight holder #1: 120 x 44 mm Tealight holder #2: 160 x 44 mm Tealight…
Semafor pro paraboly 12mm a LED 5mm, příprava na konektor RJ10 4p4c. Schéma v přiloženém pdf. EN: For parabols 12mm and LED 5mm. See attached manual in pdf.
Hey everyone! 🌟 I’ve got a new model for you today that’s designed to make your workspace more practical and stylish. This light holder is perfect for LED strips from IKEA and fits perfectly with the Anycubic i3 Mega printer. Not only…
A simple gridfinity holder for this handy torch. Printed in PLA, but any material should be fine.
Tree for LED Tealight. Printed in Vase mode 120mm height - layer 0,16 180mm height - layer 0,2
Made by uploading my art to Lithophanemaker.com Art Based Off Greg Capullo Cover
Customizable LED Color Filter for Dollarama Mini Battery-Powered Lights Description: Elevate your Dollarama mini battery-powered LED lights with this easy-to-use colour filter system! Designed to be compatible with the affordable white…
A charging station for a Samsung A34 (another cable from amazon), a Garmin Vivoactive 5 (Orginal cable) and the Galaxy Buds 2 (Orginal cable). Since I don't have a bedside lamp, I added an LED strip to the model. Since this configuration…
The Old Man Mountain bicycle racks have holes for presumably mounting lights; they are each ¼" in diameter, set 1" apart (center to center). This mount has a nubbin that protrudes down into one of the holes, then relies on a ¼" bolt to…
Made by uploading Original Art to The Amazing www . lithophanemaker .com
If you are installing C9 Christmas light bulbs on your house and run into a spot where you'd rather not have the light showing, try this cap in place of the C9 cover. This works great on transitions from gutter clips to shingle clips to…
This is my “Raptor” Lightbox and what I used to assemble it. Bambu Labs P1S/AMS .04 Nozzle 10% Gyroid Infill Filaments used for this project: Elegoo PLA - White Elegoo PLA - Black Software: -Fusion360 -Bambu Studio Materials: -LED kit (1…
Just a better version of my previous gun this time optimized for 3d printing Category: 3D Printing
Generic light cavalry, total of 27 but you can bluff it up to 30. Aarmed with tiiiny little bows, but they can be any kind of cavalry. Small enough to be based on a scrabble tile, like all my 2mm models. I printed them on my AnyCubic…
LEGO Batman Lithophane Lightbox—the ultimate addition for any LEGO or Batman fan! Whether it’s for the superhero in your life or someone who loves the iconic caped crusader, this lithophane lightbox brings Gotham’s Dark Knight to life in…
Twilight Zone pinball clock housing. The original tends to crack or get yellowish and is very expensive to buy.
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
The Christmas Santa Tealight Holder is a delightful 3D printable model designed to spread festive cheer. Its intricate design captures Santa Claus on his sleigh, pulled by reindeer, with a backdrop of snow-covered trees. When lit, the…
A simple and minimalistic Christmas hut, it looks good as is, but I've enjoyed more to add some personal touches to it. In the middle there is a socket for a 37mm tealight It is cca 100x150mm and takes about 3.5hours to print with a .6…
The birthday caterpillar comes with 6 pieces for tea lights, but if you want to place more lights, you need more pieces!
Layer hight for the strings work should be 0.3mm. For others, don't care. Feel free to contact me if you need support on printing this model and modify the model. I use PrusaMK4, 0.6mm nozzle. christmas tree-3-0 v0: no holes for emitting…
To making the handling for our fairy lights a little bit easier, i made this clip. The clip is for perforated plates with 15x15mm holes.
This is a cover/adapter for a LED spotlight ( if scaled at 25 cm the spotlight hole is 8 cm)
This design is inspired by an old gutter clip that is no longer in production, modified to be easier to print. The original upload of this model recommended strategically placed support enforcers. This updated version requires no supports…
make shadow of snowflakes and bells pattern
12/15/24 update-- uploading REV 3 models. faceplates easier to remove tighter fit stem ornament body prints easier stl files now populate in correct orientation. new faceplate designs. new R3 ornament is compatible with all original…
Designed to accommodate the depth of the Pimax Crystal (Light), but it should work for almost any HMD. (Not suitable for PSVR2 due to how the visor is attached to the halo + the facial gasket is so soft it might hit the lenses). Spreads…
Welcome Light up your next adventure with the LightCore Ranger , a remix of Dummy 13 ! New features include mounts for 5mm LEDs in the forearms and head, and a backpack that stores a coin cell battery. Follow the same assembly and…
Abominable Snow Monster | Bumble | Christmas Lights | Rudolph the Red Nosed Reindeer
Cup to hold H11 55W lightbulb. Can be used for load testing of automotive or other 12V circuits. The cup prevents bulb burning your hand or car interior while testing. There are small holes in the cup wall to allow better visivility of…
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
I normally publish and update all my models at MakerWorld. They are only here on Printables to keep the accounts consistent. Please download the newest version here at MakerWorld. The box has a depth of 40mm which should be enough for…
This simple yet charming tealight house brings a cozy, warm glow to your home during the holiday season. Its clean, Scandinavian design adds a touch of seasonal charm, perfect for creating a relaxed and festive atmosphere. Place it on a…
Motorcycle fog light holder for 26mm. Clamp size is M4 nut. Fog light mortice is M6.
My LED lights that had trim included burnt out and I didn't want to spend $30 a piece on replacements so LED bulbs and 3D printed trim pieces to the rescue
I created a simple shade for the Ikea Mittled lightbar. It's modular and can be used for all length of the lightbars (40, 60, 80cm). The ripples at the front cover the seams between each part as good as possible. To connect the single…
I designed a new bulb for the base in https://www.printables.com/model/678099-christmas-tea-light-bulb that is modeled after a C9 outdoor Christmas light. The original has a pointed tip that does not print well in vase mode. As long as…
Slips on a common (USA) recessed ceiling light to limit the light or glare in 1 direction. This one shrouds 120 degrees, at about 90mm. The kitchen light in the photo bothered her when sitting in her favorite chair. It could easily be…
FPV Race Motor “T-Motor F80” LED light. Fitted with a cut out for a simple LED control board. The logo is a multicolor print where the first layers are printed with a translucent material. After the function check, the housing is glued…
Remix of the already great design by pipo. Also check out the original design! Let there be light! Use this model to easily mount an IKEA SKYDRAG oder SILVERGLANS (40cm) light bar to the Z-axis of your MK4/MK4S. The light bar is also…
If like me you buyed an a older version, you may noted that is a little more large than the printer, here is the fix
I designed a snowflakes lithophane tea light ornament you can hang or stand. For LED tea lights only!! The main sphere is 70mm in diameter, with a lithophane shell to allow some light through that too in varying degrees. The snowflakes…
I had to print this at 190 degrees Celsius, lower the printing speed and keep the door open to my printing enclosure. If I didn't, the corners on the smaller spiral would end up looking really bad. You might not have the same issues. Dry…
Simple brackets to mount the T8 lights onto a Hydroponic Tower this is made for 8mm rods as the “arm” one bracket is for easy mounting using zip-ties.
Ich habe es aufrecht stehend mit Baum-Supports gedruckt.
This is a (mostly) realistic version of Luke Skywalker's lightsaber from Return of the Jedi scaled down to 40% of original size. The design is broken into multiple parts, letting you easily create a multicolored handle. Parts are…
Candle, tealight candle holder. I recommend an electronic tealight.
I used the “Staff” model from the accessories to make it, a pretty simple flashlight to illuminate the Dummy 13 halls.
Vertical lightsaber stand with holes for wall mount Made for a lightsaber handle diameter: 31mm Hole is 33.5mm wide and 115mm depth Screw holes are made for 4mm screws I hope you'll enjoy this print and may the force be with you!
Someone needed an air intake that blocks the light from passing through so I designed one. The hole you need to make is 68mm in diameter. I'm far to stupid to make this parametric, so this size wille have to do. You can always install 2…
Molle lighter holder for backpack belt, etc. Molle držák zapalovače na batoh opasek atd.
This ceiling light clip is originnaly a metal part which often causes short circuits in the car so i made a new one . I used ABS avec printed it vertically. You can stick some aluminium tape in it to reflect the light
Light up your space with a custom “Tori” Gate lightbox for your space Been in Japan and loved the vibe, wanted to come back, so I decided to print something to remind me of my goal! I used this USB-C Female PCB Click Here 5V Led Strip…
This holder transforms a standard Bic lighter into a more efficient wick-based lighting tool, perfect for those who prefer a cleaner, butane-free flame experience. The design features a secure holder for your standard sized Bic lighter…
2nd Remix. Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame but was too tight to rest under the arms so just added…
Basic wall mounted holder for an Arcchio (or possibly other generic) IR remote. Useful for when the remote is dangling around and you don't want to lose it. Screw holes are 6mm wide. Printed in PLA on an Ultimaker 2.
