String Lights Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.12 – €1.37 net (excluding VAT)
For file: String Lights Mount_0.8n_0.4mm_PLA_MINI_44m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.24 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 44.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Versatile mount for hanging string lights. Perfect for patios, restaurants, or cozy home decor setups.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 56
- Makes
- 2
- Views
- 326
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this sturdy and versatile mount, you can easily hang string lights for a warm, inviting atmosphere. Perfect for restaurants, patios, or home decor, these mounts keep your string lights securely in place while allowing for customization.
Usage
Print as many mounts as needed, then evenly space them along the desired mounting area. Secure the mounts to the wall. Once mounted, decide how much you want the lights to droop, place the T-joints of the string lights into the mounts, and repeat until all mounts are filled.
Uses
- Securely hang string lights
- Organize and manage light placement with ease
Parts
- String Lights Mount (included)
- 2 to 3 screws per mount (not included)
Dimensions
- Mount: 35mm tall, 55mm wide, and 40mm thick
- Screw Holes: Designed for screws with a 5mm shaft diameter, 10mm head diameter, and 5mm thick head
Print Instructions
- Material: PLA or PETG for added durability
- Supports: Not required
- Orientation: Place the bottom flat on the build plate
- Brims: Not required, but can be used for better adhesion
If you enjoy this model, please leave a like and a comment. Please contact me if you have any questions, concerns, or problems.
If you want to support the creation of more models like this one, you can subscribe to my Printables Club (at https://www.printables.com/@Devise3D#[email protected]) or you can purchase an individual model on CGTrader (at https://www.cgtrader.com/devise3d).