Counting matching models…
i finally got sick enough of needing a flashlight to see printed material behind where the toolhead happened to be that i decided to do something about it. none of the other models i found suited my needs, so i made my own using parts…
I designed this for my Govee LED Light Strips, so I can easily cast the light upwards towards the wall at an angle for some accent lighting. There are holes equally spaced apart for securing to a surface via screws or nails. The strips…
The stairway lighting controller RL-Step-02 I found on Amazon to illuminate step by step the stairs. That looks very good - but it is delivered of course with a lot of cables and with a not very nice power supply with additionally…
A stencil of various lighting fixture symbols, at 1:25 scale.
i finally got sick enough of needing a flashlight to see printed material behind where the toolhead happened to be that i decided to do something about it. none of the other models i found suited my needs, so i made my own using parts…
I needed to mount a smaller platform on a stand. A lighting stand with 3/8" to 1/4" top worked fine. Easy print.
This is the Ceiling Mount Kit for the FormoLum lighting system. Please note that you need to download and print the FormoLum Universal Lamp Base to use this kit. You can download the FormoLum Universal Lamp Base here:…
Description This project provides a complete mechanism to mount and rotate a LED panel using stepper motors (NEMA 11). The design allows the panel to pivot 90 degrees to toggle lighting on or off for samples underneath. All parts are…
Tested print settings: Material: PETG Layer height: 0.2mm Nozzle: 0.4mm Assembly instructions: Insert hinge into main bracket body Cut a small segment of 2mm diameter wire to fit through hinge (I used a hacksaw) Screw bracket into ceiling…
Night Sentinel weapon of Doom The dark ages to print in one piece. Recommended to print vertically to gain scale or split it to make it real size if desired. Thanks for stopping by :) Link to Patreon :) patreon.com/Artoys3dPrint Night…
Gutter Bracket for Outdoor Lighting; fits most standard outdoor lighting fixtures with optional 2.5" riser. Lights can fasten directly to the mount or to the riser that is then attached to the mount. The gutter mount has a built in spacer…
Smaller dome mount for outdoor lighting fixtures with diameter of 22.5mm . Print using ASA. Mount is approximately 2.5" in overall diameter. No supports if printed with threaded end facing build plate. 4 wall loops suggested, 0.18 layer…
I printed this adapter after the ring clamp of my mount broke. Seems to be sturdy. Printed in ASA, 0.2 layer height (important, the model is designed specifically for this layer height). 3 perimeters and 45% infill.
The bracket consists of two parts that must be glued together. A pyramid-shaped tenon makes it easier to position them. Each bracket is attached to the Skadis panel using one M4 screw. The file is created so that M4 brass threaded insert…
An opera balcony, composed of 3 parts, pluggable, wall-mountable, lighting possible, for placing e.g. Mini 13, Dummy 13, Lucky 13 figures (print at 150%). I made it for the figures of statler and waldorf from Alex as you can see at the…
Customizable tray with lighting, adaptable to your needs. With integrated LED lamp. Since the inner base is customizable, you can: Use the included decorative lids. Design your own bases with your preferred theme. (One base is plain so…
Dies ist eine Halterung für diese LED-Streifen . Sie ist beweglich und kann somit blendfrei eingestellt werden. Der Druckraum des „ PrintClosure Project “-Gehäuses ist sehr gut ausgeleuchtet. Die ca. 11 W/m starken LED-Streifen werden mit…
Solderless LED Track Lighting are a modular set of parts that can be incorporated into final electronics projects with minimal to no gluing. The design takes advantage of TPU's flexibility to hold the wires together without the need for…
Seat plug for led foot space illumination. When installing LED lighting in the foot space, use the LED lighting plug in
Note: The Universal Base is the core of the FormoLum lighting system. All FormoLum lampshades and base covers are designed to fit to the Base. FormoLum – The Modular, 3D-Printable Lighting System by 2Kperformance Let There Be (Your)…
Features and Functionality (updated 2026-05-08) v1.0.0: Added functionality: It is now selectable to run the heater (CYCLING) and get it controlled either by Temperature or by Humidity. When temperature has reached the target setting it…
Headphone stand with a couple of options for lighting the base. Links to what I used below. I'm starting to really like the fairy lights for projects like this. They're bright but not too bright and the wire can be formed to fit into…
If you’re looking to add a splash of color to your desk or create a cozy atmosphere in your room, building a smart LED lamp is one of the most rewarding entry-level electronics projects. In this post, I’ll walk you through how I built a…
This is fairly modular, and can be assembled in multiple configurations. To use all picatinny (Top, Back, Bottom, two sides) the BOM is as follows: 1x m3x10mm thumb screw (this can be a normal m3 bolt, but will require tools to take the…
Stronger than before, and now printable with a 0.6mm nozzle! Still not quite as durable as a metal wrench, but plenty strong for the amount of torque you should be applying to light fixtures, and coming in at ~$1.50 each. Multi-color…
Would recommend increasing walls to 3-4 for strength if you have the Trail Evo (it's chonky)
This is a stand for the SteamDeck, including charging for the Deck and RGB-Led lighting. The stand is only intended to charge and display the steam deck while not in use. While the deck is in the stand, it cannot be used! Print…
I needed holders for hanging string lights in my roof vents and came up with this. It is made for Cedral vents and can lock in place with a locking tap. It should fit other vents with the same spacing, but may not fit as tight.…
Modulair Diffusion panels with LED lighting! disclaimer: Still in the process of figuring out product design, testing and documenting everything this will be a very early concept. currently I'm in version 8 or 9 (can't even remeber/ keep…
For use with the configuration where the AMS sits on top of the printer. The light attaches to the handle on the printer's glass lid. Quick and easy to remove. Printing: Printed in Bambu PETG Basic (Grey) on the smooth PEI plate with…
A button with a lock was inserted into the camera casing, taken from the site, to turn on the backlight from the front panel. A channel for wiring is made along the inner wall. (panels B and C) In panel D, the outer corner is cut off to…
Designed these to mount the cheap 3/4" white LED truck clearance marker lights in the corner of truck toolboxes for night area lighting. Amazon.com: Nilight 10 PCS 3/4 Inch Round LED Clearance Light LED Front Rear Side Marker Indicator…
A clip I designed to hold a pair of strip lights I built so that I can stream pinball machines without worrying about the amount of light on the playfield. Print four, stick on magnets, and if needed install some metal panels on your…
I designed this for my Govee LED Light Strips, so I can easily cast the light upwards towards the wall at an angle for some accent lighting. There are holes equally spaced apart for securing to a surface via screws or nails. The strips…
I purchased the Stern Pinball Pro/Premium Speaker Lighting System (4") before the LE version (5 ¼") was announced. I later purchased upgraded 5 ¼" Alpine S2-S50 speakers and wanted to make the 2 purchases compatible. I carefully peeled…
This is a much more detailed speaker insert than the one that comes on the LE model or the ones that are found for sale on Pinside. This insert has the exact same dimensions and hardware holes as the insert that is included with Stern’s…
The stairway lighting controller RL-Step-02 I found on Amazon to illuminate step by step the stairs. That looks very good - but it is delivered of course with a lot of cables and with a not very nice power supply with additionally…
I was looking for a simple lighting solution to monitor and time-lapse prints and this is the result. It's only been on my printer for half a 20+ hour print but seems to be working well. The light listed below is motion/heat activated so…
This model has the same dimensions and hardware holes as the insert that is included with Stern’s Speaker Lighting System for Pro/Premium and for the LE. It’ll work as long as you have the 5 1/4” speaker plates. I've also created a…
Backseat lighting house for Mitsubishi ASX (might fit other models) Just remove the backseat handles and use it's screws to put it in place *need to install a wire from the main light in the front to the backseat light is from ebay:…
Elevate your photography lighting setup with this mini tripod specifically designed for mounting lightweight LED lights in small photo studios. Perfect for photographers seeking a compact and portable solution, this tripod allows for…
Smaller light for the backseat of Mitsubishi ASX Light link: https://www.aliexpress.com/item/1005003171890899.html
bring your dart game on a new level. With a self printed light ring. You can stick a normal LED stripe on the inside of this ring. I used this one for my build: https://amzn.eu/d/9oLgnr6 Advantage of this stripe in my opinion is the fact…
Support allowing you to attach a much more powerful light to an Elwing brand skateboard. This support replaces the one initially provided and allows you to attach a light, which normally fits a bicycle (so circular clamping tip). It…
Parametricly customizable holder for LED Stripe profile originally designed for 17.6mm profile and 100° angle but is fully Parametric inside Fusion 360 and can be customized to whatever profile and angle you want. Intended for indirect…
Parametricly customizable holder for LED Stripe profile originally designed for 17.6mm profile and 100° angle but is fully Parametric inside Fusion 360 and can be customized to whatever profile and angle you want. Intended for indirect…
Simple lighting remote holder that is just VHB taped onto the side of a Voron. Feel free to remix it with attachments to the back or sides.
Osvetľovací stožiar na železničnej stanici / Lighting mast at the railway station
Reasonably dimensionally accurate concentric brightness knobs. To be honest, this design pushes the limits for a 0.4mm nozzle and would ideally be printed with a 0.2mm, but as the pictues show you can just about get away with 0.4mm. The…
This worked well to allow more light to come through. It was a part of the design and it made more sense to print it in this way, heat the tabs and bend them to the correct angle to allow for a mechanical capturing. Otherwise some…
Insertion puzzles allow children to develop their motor skills and orientation in the shapes of objects. Individual parts are inserted into their place in the picture. The parts fit together beautifully and simply. Can also be used as a…
Cover for low voltage lamps (E10 bulb) to be used esp. for model purposes, like garden model public or other lighting. We use it on our garden railway, as well as in our garden where we have installed 12 volts electricity supply, in order…
Completely redesigned this cloud lamp around a “6.56ft Govee RGBIC Strip Light 2 Pro with Matter” light strip. Expensive, but I wanted the brightness and addressable LEDs. Requires gluing the face pieces and optional m4 knurled threaded…
This is a remix of my original model: Christmas Angel. For this Christmas I have made a model reduced to 40mm with holes (top/bottom) for mounting on IKEA LEDFYR light chain. LEDs are inserted into the hole at the top or bottom to suit…
I've created the Matchbox Logo for indirect ligthing. The body is made of transparent filament and the top covers are made of black filament. It can indirectly illuminated with an LED strip. Filament: transparent PLA (body), black PLA…
TL;DR - Shockingly strong and durable for plastic, but still not metal. Works great in a pinch or as a tool to give to volunteers, will not loosen over tightened bolts. Print in stiff plastic (PLA, PLA-CF, Polycarbonate, Nylon, etc.) with…
Add a warm glow for the Christmas Season! Another addition to my holiday scenes. This model looks great with or without an LED added, but if you choose to: it has a small hole going up the back of the snow mound and through the pole to…
Bracket to suit 39mm wide x 25mm high pool fence rail. Use 2 x 4.8mm wide cable ties to lock onto rail Multi position locking so that the cell doesn't spin in the wind, you can lock it in one of the eight positions to get the best angle…
A fun way to easily change the colors of outdoor recessed lights for the holidays! This two-piece model attaches to the light surround and holds colored gels to change the color of the light without special bulbs. Requires a lighting gel…
I was looking for a simple way to light up the HoneyComb Lamp Shade. With an inexpensive LED light chain and a small battery case which should fit inside without any problems. A version with a timer seemed particularly useful to me. The…
I've lost some of the collars so I took the cap and punched a hole through it.
Basic keychain holder for 3.5 mm jack headphone dongles Variables UGREEN "cable_diameter"= 4mm "data_connector_length"= 28mm "data_connector_plug_length"= 7mm "data_connector_width"= 10.25mm "data_connector_height"= 5mm…
This model consists of two printed parts. Transparent case: printed in PETG Base: printed in PLA Other parts; LED: https://www.amazon.co.jp/gp/product/B07NVCQXQ7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Breadboard:…
Add a dreamy touch to your space with this cloudy-inspired lamp. The shade, printed in vase mode, creates a seamless and delicate look, while the base is printed normally for stability and durability. This combination of style and…
Here is a remix of @Nat_ 's Octahedroflake model that includes a hollow shaft down the middle. This is the “Penelope” size model (about 100mm tall). I used transparent filament to 3D print the model for maximum light transmission, then…
Transformator is there meaning 15W12V IP67 Japan+ english May all you wishes come true
A Godzilla pinball speaker insert modeled after the amazing "Atomic Godzilla 2: King of the Topper" sculpt by Jazzbouche/MOJO Mod on Pinside: https://pinside.com/pinball/forum/topic/atomic-godzilla-2-king-of-the-topper This insert has the…
This MODULAR lighting solution is based on the REMOTE CONTROLLED Bambu Lab RGB LED Dots ( #KC020 ) which is a set on 6pcs. incl. batteries, remote control etc. for about 15,-€. The FRAME fits to all veranda/terrace supports of 90x90mm…
The LED strip is 24V powered by the printer. The aluminum profile measures 17 × 8mm and the switch is 13.5 × 8.5mm
Change up the boring glass shade with a more interesting replacement. This fits a base fixture such as the Hampton Bay 1-Light 7-inch exterior wall lantern . Printing Tips Print with 0.2mm layer heights and 20% infill for main cover using…
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Desk clock with ePaper display with discreet lighting and automatic time synchronization over WIFI. You need to print at least the front part and the…
Because the original LED has to be removerd when installing the Anycubic Vyper Dual 5015 V2 Rev2 https://www.thingiverse.com/thing:4974423 or https://www.printables.com/model/1498562-anycubic-vyper-dual-5015-v2-rev2-org-by-derlatzer I…
DEUTSCH/GERMAN Da es in der dunklen Jahreszeit gefährlich ist, unbeleuchtet spazieren zu Gehen, habe ich mir kurz Gedanken gemacht und diese Halterungen für die gitterartigen Protektoren, in unserem Fall Sportrex 2, entworfen. Verwendet…
To do something, it turned out that it was dark next to the printer. I came up with a lamp mounted on a printer. In my case, I powered it with 3 AAA batteries, but you can connect LED strips to the power supply. LED lighting for Anycubik…
This is a simple appliance that you stick on a standard broomstick (it fits the conical screw head of most European brooms). It allows you to manipulate theater lights and specifically barn doors attached to flood lights. I would…
Create Your Own Custom Light Fixture
Level up your dart games. With this printable dartboard lighting circle powerd by LED stripe. It consists of four parts with legs and four connecting parts (to be more stable). The connection of the parts to each other is made by a…
This small case holds two bright white LEDs powered by USB and can be mounted to a webcam to light up its field of view. I designed this so I wouldn't have to keep a lamp next to my 3D printer when running in a darkened room.…
A stencil of various lighting fixture symbols, at 1:25 scale.
I designed and printed these facade lighting based on a cast metal version. I printed mine in ABS, sanded and vapor smoothed it with acetone. I also give it at matte black paint finish. There are 2 M3 nuts slided and glued in the base. A…
Strike a cool look with this Keychain easy and dual colored (JSYK the mini bolt is supposed to break)😊
This is not a finished model and I was hoping someone could help me finish the design. I have uploaded the design file from Fusion. This design uses a flat disc LED module from AliExpress. It draws 10W of power and becomes extremely hot,…
Il s'agit d'une scie à onglet Metabo KGS 216 M. Le cache qui se trouve sous la lame et qui protège le laser et la lampe LED était cassée. J'en ai profité pour remplacer la LED OEM par un modèle plus puissant:…
Lighting Dillon xl 650 A simple lamp for the Dillon XL 650 that fits into the press head. It is designed for COB LED 7W led light. This led light can be wired with a dimmer. Stick the led with 1mm double sided tape, push the wires through…
This is the PCB enclosure for our Ghozt Lighting BlueGhozt 2.0. Can easily be edited to include holes for cable glands or other wiring methods. Includes optional blanking inserts for the default holes in the enclosure.
This project provides a 3D-printable mount designed to illuminate your computer keyboard using LED strips. The mount easily attaches to the underside of your desk, positioning the LED strip to provide comfortable and functional ambient…
These low-cost PIR switches have a settable on-time, making them suitable for applications like under-cabinet lighting in kitchens and work areas. However the device has an unsealed case, and doesn't look like it'd last very long if…
i wanted to combine the lighting chain with the baldachin. my print settings are: 0,20 mm layer height PETG no supports how to use press the lighting chain mount with the bigger opening against the baldachin rod add the lighting chain…
Holder for up to 8 filters to modify the color of Philips CL550 ceiling lamps and create any mood light you want. The holder is made in two identical parts so that it can be easily attached and removed from the lamp as needed. Two small…
Jedná se o osvětlení SPZ VW T3. Číslo výlisku je 251943139. Model je rozřezán na více dílů a následně je slepen. Packy pro zacvaknutí do karosérie jsou tištěny vodorovně, aby se zachovala jejich pružnost. Výrobek je vytištěn z PETG.
