LED Lighting for Anycubic Vyper Dual 5015 V2 Rev2 (FreeCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple little holder for two 5mm LEDs to illuminate the nozzle. Useful for https://www.thingiverse.com/thing:4974423
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 1
- Views
- 213
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Public Domain
Because the original LED has to be removerd when installing the Anycubic Vyper Dual 5015 V2 Rev2 https://www.thingiverse.com/thing:4974423 or https://www.printables.com/model/1498562-anycubic-vyper-dual-5015-v2-rev2-org-by-derlatzer I designed a replacement holding 2 LEDs.
The part needs two M3 heat-inserts, I used Ruthex M3S and two M3 screws to fasten it to the coldend-fan (4020).
For the lighting I use 2 LEDs 5mm diameter, ca. 3000K which I soldered in series to each other and connected them to he original LED-socket.
The flat part that bridges both sides is designed to channel the cooling airflow away from the hotend.
Printed in Eryone PLA+ black with 0,2mm LH and 0,4mm nozzle, but I think a more temperature resistant material would be better.
In the FreeCAD-file I put together the Dual 5015-cooler, the hotend, the coldend-fan, a self-drawn backplate (Vyper C!) and this model to show the assembly. You might find this useful to modify it or to do own works - but don't only rely on this, it might not be a complete and correct model of the reality! (but better than nothing :)