350 models
DEUTSCH: Anycubic Vyper - Adapter for V6 E3D v.1.0 upgrade Genervt vom ewigem Nacharbeiten des Adapters von RyanMaverick, habe ich den Adapter nochmal nachgearbeitet und den unnötigen Steg herausgenommen. Nun passt der Adapter ziemlich…
This is an improved filament spool holder for the Anycubic Vyper or Creality CR-6 SE. It fits and locks with the original spool arm provided by Anycubic or Creality. Parts required 2x 608ZZ bearing 1x Spool Holder v21 (0.2mm layer height)…
Hello, we would like to introduce you to our stealthburner conversion mod. With this mod, the standard printhead from the vyper is exchanged for a stealthburner printhead (thanks to the Voron community). compatibility list: - anycubic…
Moved to this Page: https://www.printables.com/model/496044-anycubic-vyper-kobra-stealthburner-mod-bowden-and-
Anycubic Vyper spring steel print bed guide. Makes quick installation of the Vypers stock spring steel build plate. Print snaps into place between the vypers print bed carriage and print bed. This is a remix of thing:5219287 by taka0909
Anycubic Vyper PTFE-tube Führungsklammer Passt für den Anycubic Vyper . Ihr müsst selber probieren, ob die klammern auch bei anderem Drucker passen Du hast bei deinem Anycubic Vyper auch immer das Problem, das das Kabel des Hotends und…
A simple printhead case replacement for Anycubic Vyper. Main goal was to allow makers to “see” easily when the small strain gauge led is lit (to avoid print head crash into bed). Then I replaced stock air deflectors with wider ones that…
Es können der original Extruder und der Schrittmotor weiter verwendet werden. Die 8mm Hülsen müssen ins Druckteil eingepasst werden und zwischen Hülsen und Rolle habe ich eine M5 U-Scheibe eingesetzt.
New updated Model for the Filament Sensor guide / support of the Anycubig Kobra Max and Vyper. The Sensor fits into the guide without any gaps, it can be used with and without PTFE-Couplers. Please be aware, that your printer needs to be…
DE: Nachdem ich nicht genügend Platz hatte die Spule seitlich am Drucker zu positionieren, entschied ich mich einen Spulenhalter zu designen, welcher oben auf den Rahmen gesetzt werden kann. EN: After not having enough space to position…
Support anti-vibration pour Kobra 2 Pro/Neo/Vyper Je ne l’ai testé que sur Kobra 2 Neo mais je pense qu’il est compatible avec d’autres Kobra La pièce a été imprimée en 0.2mm Cette pièce est un remix de ce modèle qui ne contenait pas de…
This is a filament guide for the Anycubic Vyper with integrated filament runout sensor. Use a PC4-M6 tube coupler to attach a PTFE tube coming from the Spool. For installation the existing screws can be used. Print Parameters Infill 100%…
The version included in Hero Me put the fan duct nozzle too far forward and didn't tuck in tight to the hot end.
This modification is intended to carry over as much as possible from the stock Anycubic printer (Vyper Rev. C, Kobra Plus and Kobra Max), but to get an direct drive extruder and better part cooling. My target was to be very compact with…
V2 improvements: Added version with hole for bowden fitting Sturdier screw mount locations V3 improvements: Extended filament guide to ease filament insertion Improved rigidity Onshape model:…
Made dat_dakota_guy17's design a little taller, so that I did not have to remove the foot off the stock Vyper filament spool holder Used the free Microsoft 3D Builder program on Windows 10 to modify his design. I split the part in two,…
There are of course already some variants. But I wanted one that is a bit more stable and covers the screws. On my Vyper the V-Slot profile is a bit wider on the right side. I recommend to print the cover for testing and then adjust the…
Here is a completed kit for the vyper v3 with the flat ribbon cable to the extruder. "Bed-adapter" to "hotbed-extruderadapter-connection": 23x Chainlink-small 23x Chainlinkcover-small "Extruder-to-hotend" to…
THIS IS NOT A PRINT MODEL This model is intended to be set as a print bed model in Prusa Slicer. It does not include a texture. Category: 3D Printers
Guide made of TPU material for the Z-axis at the top so that it does not wobble.
It's my take of linear rail kit I've designed for my Anycubic Vyper. The kit includes the left and right MGN12H mounts that replace the V-roller bearings and original Y-axis endstop mount for 2020 extrusion. [UPDATE] Through some changes…
The Capricorn tube is much stiffer than the original tube of the Vyper. This bent the strain gauge so much that the levelling was aborted with a "straingauge abnormal error". That's why I designed this simple holder. Now everything works…
Allows mounting the Anycubic Vyper's filament sensor at a 45° angle to reduce strain on the sensor when the filament spool is mounted on the top instead of on the side. Prints nicely in PLA without supports (see picture with print…
Anycubic Vyper / Y Cover Filamentchange at 0,6mm. add Update: Version V2, smaller Vyper Print and optimized Print Settings Printer: Anycubic Vyper Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 20% Filament: Das Filament /…
Verlängerte Kabelhalterung mit Bowdenhalter.
Welche Sensoren sind möglich: Bltouch, Bltouch Pro, 3DTouch Wie der BL Touch angeschlossen wird erfahrt ihr unter folgendem Video: Youtube: https://youtu.be/gSbswjLxbUg Discord: https://discord.gg/xnm6GsynGk Github:…
hello to all, I have created covers for the motherboard and the power supply. It fits exactly like the original cover.The original metal cover of the power supply needs to be cut to fit the new larger fan so that it has room to blow, for…
Can be used for any kind of projects requiring accurate measurements of the printhead v006 from anycubic vyper.
Camera mount
You want to feed your Vyper with filament through a bowden tube? With this new filament holder design, you can stick a bowden tube into the filament sensor input and feed your filament from a distance. Replaces the old tiny metal bracket.…
Anycubic Vyper PEI ADXL345 Y-Mount Mount for KUSBA ADXL345 and ADXL345
Printed with 10% infill, PLA, no supports required
****************** *** ITALIANO *** ****************** Annoiato del solito V5 di serie sulla Anycubic ho preferito passare al V6, più precisamente al Phaetus Dragonfly BMO AllMetal. L'adattatore deve anche supportare l'autolivellamento…
This is a riser meant for Anycubic's Kobra Max, to help get it up off the carpet, and get some extra air flow, for those that find themselves in that situation. It should also work with the Anycubic Vyper, or anything that has a round…
Hello, this is our Bltouch Mount for Anycubic Vyper and Kobra Plus and Max. With this board you can use the bltouch print and play (klipper): https://aliexpress.com/item/1005004281432549.html Source files:…
Model is based on NaNO3 Filament Guide for the Vyper. The Kobra Max sadly has a screw, making it impossible to use the original version. Therefore I created a new model from scrap, based on the Original one. I added rounded edges, so the…
Stückliste: Linsenkopfschrauben oder Zyl. Für den Halter 2x M5x8 Für den Schlitten 4x M3x6 Für die Winkel 6x M3x8 Für die Winkel 6x M3x14 Einschmelzmuttern 7x M3s Einschmelzmuttern 2x M5s Linearführung MGN12H…
A quick and dirty remix of the adjustable Endstop Trigger for the Anycubic Vyper by Einlander, I made in Blender. Basically, I just made the body thicker, so it can be used with the original screws. Also, I doubled the thickness of the…
LED Light Bar Holder for Anycubic Vyper. You need this LED Light Bar (308mm): https://www.amazon.de/gp/product/B07DPJ1KXC/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 Print Settings Printer: Anycubic Vyper Rafts: Doesn't Matter…
No supports. I designed it to use with a Beaglecam camera but it will work for any camera with a stand base.
Holder for an Anycubic Vyper 3D printer or others with a 20x40mm aluminum profile. Also included are a tray and slots for USB / SD card / Mirco-SD. A holder for the PI-Cam is also included. The raspberry case is this one:…
The drawing is in mm. Link to LED lights. https://www.aliexpress.com/item/1005004068826654.html?spm=a2g0o.order_list.0.0.333d1802cZag1u
I couldn't fine a good mount for my webcam to use with octoprint, so I made my own. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: No Resolution: 0.15mm Infill: 15% Gyroid Filament: eSun PLA+ Black Category: 3D…
Moved to this Page: https://www.printables.com/model/496044-anycubic-vyper-kobra-stealthburner-mod-bowden-and-
I really like the original model, but the in/out holes for filament were 1mm off center from the sensor, causing my filament to bow and scrape. I used meshmixer to move the holes into proper alignment, and now the filament slides through…
Acrylic Sheet Dimensions: (3) 17 21/64" x 23 21/32" / 440 mm x 601 mm x 3 mm (2) 8 21/32" x 23 21/32" / 220 mm x 601 mm x 3 mm
This is an adjustable endstop for the Anycubic Vyper. Since the bed on the Vyper is not adjustable, you can use this to adjust the z endstops on either side of the printer to have a better bed leveling. The lines show the factory height…
I designed this Camera Tripod that you can mount on your Anycubic Vyper! (works on Ender 3 V2 too) DIY video: https://www.youtube.com/watch?v=iGDAuAXIE_M Bolts and nuts you need to assemble this tripod: 2x M5x12 Bolt 3x M5x20 Bolt 3x M5…
Here are the extruder and steppers ive used and work wonderful. https://www.amazon.com/gp/product/B07TY4BFF2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Need to get Right hand version…
Description Simple SD Card holder designed to fit the side rails on the Anycubic Vyper 3D printer. You can fit 3 SD Cards, 3 micro SD Cards, and the USB Card Reader supplied with the printer for quick access. Print Instructions Print the…
Die Y-Linearhalter sind ein Remix von: https://www.printables.com/pl/model/169489-anycubic-vyper-mgn12h-y-axis-linear-rail-kit?fbclid=IwAR2GCK7LIJAdjURp8Q7YlXN_zA7_29ol_zSFM_jpIRnWyBzvQ_V145M47dc Stückliste: Linearführung MGN12H 2x…
Custom Print Head for Vyper Printhead V1 and V3 In mid-December 2021 I had the idea of redesigning the printhead on my Vyper! My goal was to keep the build size of the original printhead, despite the 5015 fans. The width has remained the…
After top mounting my filament on the Anycubic Vyper, I noticed it would catch and snap back on the corner of the Z axis bar. I designed a guide to top mount between the two top screws using a 3mm x 10mm screw using DaVinnci2000s nut to…
Da der originale Anycubic Vyper Spulenhalter sehr schwach ist und mit der zeit ausleiert, habe ich einen zusätzlichen Spulenhalter konstruiert, der einfach in den bestehenden Halter eingeschoben werden kann. Der Halter kann somit auf…
For the spec with perforated logo : Put it horizontally and don't use supports. Just be sure to have a good first layer. To find out, I made a test model . It only takes a minute to complete but it can help a lot :) For the spec with…
*** Please give me a like. It doesn't cost you anything and rewards my time and motivates me to create more models. Thank you! *** Die üblichen Filamentrollenhalter passen nur für große 80 mm-Rollen und sind schwer zu drucken. Ich habe…
The Scythe was designed to give your hotends heatsink direct flow while the 180 degree squirrel cage blower surrounds your nozzle with cooling. Designed to fit anycubic vyper kobra max and kobra plus with a dragon hotend but should fit…
I created simple feet to put the Anycubic Vyper on top of Tennis balls to make prints more silent by reducing vibration. To support the spool mount, there is a second .stl to print, which supports the spool mount.
Wie der BL Touch angeschlossen wird erfahrt ihr unter folgendem Video: Youtube: https://youtu.be/gSbswjLxbUg Discord: https://discord.gg/xnm6GsynGk Github: https://github.com/cryd-s/Vyper\_extended Print Settings Supports: Yes Resolution:…
I want add a bowden tube from my SunLu filament box to my sensor but wanted it at 45°. I was previusly using https://www.thingiverse.com/thing:5198488 and liked the esthetic. You have to take off the sensor support arm for it to fit.…
Filamentchange at 0,6mm ruthex M3S Gewindeeinsatz SHORT -... https://www.amazon.de/dp/B09MTRHBRL?ref=ppx_pop_mob_ap_share Print Settings Printer: Anycubic Vyper Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 20% Filament: Das…
Remix of model “V6Adapter-3mmShorter_1.stl” from thing#4976966. UPDATE 9/2/22: Recently upgraded to a revo micro on my vyper and this mount works well for this model also. It's tightened down all the way and I had to use a shorter M3x12…
I needed a way to route filament over the top of my kobra max due to converting to direct drive.
In my specific case I've noticed some quality degradation in my prints while using the direct drive system in comparison with the default bowden solution so I've modified the direct extruder adapter from AndyO7…
Thanx to Bush for the Vyper spool holder . Here the basis is turned 30 degrees, so the filament is more directly aligned to the filament sensor. Together with holder_2___30_degrees you have to use holder_1_long , together with…
Two parts can be printed seperatelly. Printed with ABS cause the bed is getting hot.
Anycubic Vyper Bed Handle Print Settings Printer: Anycubic Vyper Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 10% Filament: Das Filament PETG red Category: 3D Printer Parts
Hier ein Stopfen für die Gewindestangen des Anycubic Vyper
This is a ADXL345 hotend mount for the Anycubic Vyper to make use of Klipper's Input Shaping automatic calibration. The Vyper seems to have a unique positioning for the hotend, and I couldn't find anything to fit it, so I'm uploading what…
Nach dem Umbau auf "Anycubic Vyper Silent 120mm Fanmod" brauchte die Vyper mehr Bodenfreiheit. Deshalb konstruierte ich diese Füsse als Ersatz für die Originalen. Beim Drucken benötigt das Loch Support (TouchingBuildplate/Grid). Gedruckt…
A direct drive setup for the Anycubic Vyper. Easy prints. Use insert nuts. Print with PLA, PETG, ABS. Size bowden tube to fit between extruder and hot end. Included is a back plate with a filament sensor mount.
Z-Ring for Anycubic Vyper. I printed in TPU. No more noise and wobble. You don't need the old black rings. Print Settings Printer: Anycubic Vyper Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10% Filament: Saintsmart TPU red…
.2 layer height bearing carrier v2 is a press fit v1 is a bit looser Requires two 608 bearings 2x bearing carrier and 1x of everything else Place bearing in one side of tube, flush with the side, insert one carrier through the bearing,…
A custom hotend cover, based on the Anycubic Kobra Max/Vyper one, designed by jmperou. I have not printed it myself, i only designed the remix! Added some lines and some honeycomb covers to the fan openings... Also added a 1mm inset VYPER…
UPDATE 27/05/2022 Added the other parts of the original file, simplified for faster and easier printing. Added some instructions for the top parts, see image You need to print: z axis brace top right z axis brace top left z axis brace…
Dies ist meine Halterung der Beaglecam für den Anycubic Vyper. Der Mast ist drehbar und die Camera mit der Klemmschraube stufenlos Höhenverstellbar. Da mein Vyper höhere Füße hat müssen für die original Drucker höhe der Stützfuß und der…
This is version of printhead mounting adapter for Anycubic Vyper and Clockwork2 extruder for original backplate. The adapter allows to mount latest version of Stealthburner printhead with Direct Drive extruder Clockwork 2 on original…
I wanted to swap out the original hotend that was installed on my Vyper for an E3D V6 Volcano full metal hotend. there are mounts for the original V6, but not one for a V6 volcano. This is a 2 part design, one left and one right piece.…
I reworked the original XOL Toolhead mount to fit on an anycubic vyper or similar printers. I have also added a mount for a BL-Touch. Works for the low XOL-Toolheads like for Phaetus Dragon or Bambu Hotend. Clamps have been fitted to…
Description Simple dust/debris covers designed to fit the belt tensioner on the Anycubic Vyper 3D printer. Print was designed to press fit into the existing slots to give the printer a slightly sleeker look while preventing dust and…
Gedruckt wurde mit PET‐G 0,12 mm Druckgeschwindigkeit 50mm/s
Hallo, hier ist kurzfristig ein Update der Backplate. Diese ist um 2,5 mm schmaler als die original STL. Bald ziehen alle STL auf diesen Account um. CRYDTEAM
I got fed up with existing tensioners for my printer and made these ones from scratch. You're gonna need four M5 bolts, two for the tensioners and two for mounting the Y tensioner. The required length is anywhere from 1 to 2cm, depending…
I designed this mod to allow me to use the function in cura to clean my nozzle during printing ,when I was printing with PETG which tended to buildup during a long print around the nozzle enabeling nozzle wipe in cura removed this build…
Because of my bowdenholder, I can not use the original chainmount for the printhead. Therefore, I have designed this combination. Printed with 0.15mm, 6 walls, 40% infill (tri-hexagon).
Disclaimer: This mod requiring you to remove the cover of your AC power supply and you will need to deal with AC power wiring. If you don't know what you're doing I strongly advise to get help from experienced electrician. Risk of fire…
Due to the feedback of the last version of the installation is not stable, this update was made. The backplane and iron bracket of the four screw holes I repeatedly measured, but the print will always have errors, resulting in the…
Anycubic Vyper Filament Sensor Holder with 608 Bearing. one Part for Original Extruder one Part for Original Extruder Filament from Top one Part V2 for Micro Swiss Extruder one Part for Micro Swiss Extruder Filament from Top The tab on…
I made a Z-axis holder for the AnycubicVyper printer because the original part from the manufacturer cracks or completely collapses over time. For the part, I copied the sizes of the holes so that it fits well and its shape is easy, only…
A side filament guide for my Vyper, when I use a top mount spool holder. Help guide the filament. Installed where the runout filament attaches to the machine. Move the filament spool to the top of the machine and need a side guide so the…
I remixed this adapter plate to make it possible to raise and lower the Stealthburner and BL Touch
UPDATED VERSION: I did a mistake and uploaded my old Prototype. Now you can easily load the Filament. Simple Adapter for my Phaetus Dragon ST Hotend. I use this Hotend with custom Dual Fans like “Butterfly”. I used this build:…
This is to fit the Creality Ender 3 light bar onto the Anycubic Vyper. very simple print. the rest you can follow the install on the light bar and youre set. Light: https://a.co/d/0m3vDyw
Simple spacer/stand for Anycubic Vyper. This works only for older Anycubic Vyper. They build in the newer Version other stands. I got the Version “B”. i printed in PETG.
I printed them in ABS but PLA or PETG will be fine, print with a brim. You will see there is a little connector one line wide at the bottom this tricks the slicer so you can set brim to outside only and not have to remove from the center.…
Add felt pad for noise and vibration reduction.
Update: Bitte benutzt meinen neuen Halter. Er verwendet die gleichen Kugellager und kann auch kleine Rollen aufnehmen: https://www.printables.com/de/model/498019-anycubic-vyper-filament-holder-50-80mm-spools-easy Please use my new holder.…
Anycubic Vyper / Top, Wall Mount for Spool Holder Use a hammer to deploy :-) No wobble at the mount :-) Print Settings Printer: Anycubic Vyper Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 20% Filament: Das Filament PETG red…
I wanted to have a nozzle cleaning brush like the Vorons, so I made this remix of thing:5219287 by taka0909, of which I use on the other corner to help with the PEI sheet placement. Here's the macro I use with this. Please do check that…
