1 / 13
Z brace frame support CR6 ender 3 Vyper CR10 adapter for lead screw or bars — image 1
1 / 13

Z brace frame support CR6 ender 3 Vyper CR10 adapter for lead screw or bars

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple remix to fit 8mm and 9mm rods or leadscrews

Rating
5 / 5
Likes
36
Downloads
174
Makes
3
Views
2,004
Reviews
2

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

UPDATE 27/05/2022

Added the other parts of the original file, simplified for faster and easier printing. Added some instructions for the top parts, see image

You need to print:

  • z axis brace top right
  • z axis brace top left
  • z axis brace bottom x2
  • z axis brace top 8mm/9mm x2
  • z axis brace bottom 8mm/9mm x2

The top right and top left should be printed in a strong filament, with an infill of 100% (can be less, but you want this to be strong). The bottom can have an infill of 25%, but if you do it higher it will be better. The same of the other parts of the brace.

I printed them all at 25% except the top right and top left which I printed at 100% infill

I didnt have 10mm screws, so i used some square nuts. If you have washers, use them.


Just a simple remix for using 8mm and 9mm lead screws or simple circular bars. I recommend the 9mm ones, using a leadscrew. That is the setup i am using right now

The holes are all circular, if you apply some pressure when using lead screws, you will get the holes perfectly for adjusting the parts.

I prefer the leadscrews because they are cheap, easy to get and they are firm. I know i can get a perfect fit and that the adapters will stay in the position i choose.

Category: 3D Printer Accessories

Tags