1 / 13
Z brace frame support CR6 ender 3 Vyper CR10 adapter for lead screw or bars — zdjęcie 1
1 / 13

Z brace frame support CR6 ender 3 Vyper CR10 adapter for lead screw or bars

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple remix to fit 8mm and 9mm rods or leadscrews

Ocena
5 / 5
Polubienia
36
Pobrania
174
Wydruki
3
Wyświetlenia
2004
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

UPDATE 27/05/2022

Added the other parts of the original file, simplified for faster and easier printing. Added some instructions for the top parts, see image

You need to print:

  • z axis brace top right
  • z axis brace top left
  • z axis brace bottom x2
  • z axis brace top 8mm/9mm x2
  • z axis brace bottom 8mm/9mm x2

The top right and top left should be printed in a strong filament, with an infill of 100% (can be less, but you want this to be strong). The bottom can have an infill of 25%, but if you do it higher it will be better. The same of the other parts of the brace.

I printed them all at 25% except the top right and top left which I printed at 100% infill

I didnt have 10mm screws, so i used some square nuts. If you have washers, use them.


Just a simple remix for using 8mm and 9mm lead screws or simple circular bars. I recommend the 9mm ones, using a leadscrew. That is the setup i am using right now

The holes are all circular, if you apply some pressure when using lead screws, you will get the holes perfectly for adjusting the parts.

I prefer the leadscrews because they are cheap, easy to get and they are firm. I know i can get a perfect fit and that the adapters will stay in the position i choose.

Category: 3D Printer Accessories

Tagi