175 models
IF YOU DOWNLOAD THIS MODEL, PLEASE TAKE 1 SECOND TO RATE OR LIKE IT… THAT IS ALL I ASK IN RETURN, THANK YOU. In this video I will show you how to install an all metal hotend kit on the Creality CR-10 Smart 3D printer. Currently, there are…
In this video I will walk you through the installation of a Bondtech LGX Lite Extruder onto a Creality CR-10 Smart (should also work for CR6-SE? someone please confirm in the comments section!) to convert this printer to direct drive.…
CR6 universal dual fan 5015 part fan shroud This part fan solution provides a dual fan shroud and uses a 5015 blower fan that will fit on most hot ends (checked with stock, Dragon, Mosquito and MicroSwiss hot ends). The part replaces the…
These are just a remix of the original Prusa Anti-Vibration feet by Alexander designed to fit over the rubber feet on the CR-10 Smart Pro, may also work for the CR6-SE and CR-10 Smart but I cannot confirm.
As the name describes it it's a little adapter that makes it so that you can mount your side mounted spool holder on top of the machine, it's someone else's design originally but I remixed it so that I could mount it on top of my CR10…
Part cooling fan for the Creality CR6 SE that uses the stock blower flan but directs the airflow closer to the nozzle. Version for 40mm quiet fans: https://www.thingiverse.com/thing:4777287 Print Settings Printer Brand: Creality Printer:…
You can modify the model slightly to fit other printers that use v-rollers for carriage movement. For popular printers like an Ender 3 I recommend browsing existing models Infill: I went 50% with gyroid pattern for strength Layer Height:…
Creality CR6 SE drawer organiser
Just a simple remix to add the ability to use a M10 fitting. You need 2x M3 30mm screws Instructions: Print with supports! For V1: You should test to see if the filament goes through the end, but it probably won't! So you need to use some…
You'll need a longer M3 screw, and the orogonal cap and parts.
The model provides a drop-in replacement for the standard CR6 SE spool holder, with options for 3 or 4 608 bearings ensuring a smoother rolling of the filament spool. The original goal was to reduce the oscillations caused by the original…
a nice, sleek, vertical spool holder mount for the cr6se Print Settings Printer Brand: Creality Printer: CR6-SE Rafts: No Supports: Yes (PRINTBED ONLY!) Resolution: 0.2, 4 WALLS Infill: 40 Material: PLA, if you use an enclosue print in…
Overview: This mount is part of a growing series of mounts for different hotends and extruders to the CR-6 strain gauge. The series includes the Dragon, Mosquito and MicroSwiss hotends and the Orbiter V1.5, LGX Lite, Mjolnir and Bowden…
passer votre cr6 se en direct drive! permet d imprimer du flex sur cr6
A remix of the original universal dual fang shroud from K2van. This version has holes added to lower the weight, and the bar that holds it up has been lengthened to ensure stability when it is in in the most extended position. I find that…
Camera mount on the end of the X-Axis Tension Adjuster. I needed a camera mount for Octoprint for my Ender 2 Pro. All the ones out there interfered with the screen since it was on the left, and couldn't see the nozzle due to the unique…
A custom Filament Sensor Mount for original Creality filament sensor, with mounts for PC4-M10 fittings.
Creality CR6SE Universal Camera Holder with movable arm. Easy to print. You can mount your camera in many positions on the arm. Simply mount it where it fits you the most. Infill: 30% Supports: Yes (It is better with them) Use M10x25…
Orbiter V1.5 extruder mount to the Creality CR-6 CR6 strain gauge with stock hot end OR MicroSwiss all metal hotend. This is part of a series of different hotend and extruder mounts directly to the CR-6 strain gauge. Most probably these…
Diseño de la tapa del extrusor de la impresora Creality CR6 SE. Está basado a partir de un archivo encontrado en Onshape, pero este no era igual al original. Se subieron los archivos .3mf adaptados para dos laminadores CR6SE_Tapa…
I split the original down to fit a single hex insert on the HSW, and just to hold the Allen Keys set provided with the CR6. Same holder works with Ender3 set.
I really liked the idea of Randyre's C270 mount that clips onto the end of the X-Axis belt tensioner. However, I wanted it closer to the gantry to be more out of the way, and wanted to be able to quickly remove the camera if I want to…
UPDATE 27/05/2022 Added the other parts of the original file, simplified for faster and easier printing. Added some instructions for the top parts, see image You need to print: z axis brace top right z axis brace top left z axis brace…
.3mf Files. Foots, Feet, Legs, Patas, Pies for / para CR6SE & Ender 3v2 (49.923mm) CCR6SE_E3v2_CR6SE_Feet.3mf CE3PRO_E3v2_CR6SE_back_Feet.3mf Soporte de patas en TPU / TPU legs support CE3PRO_Soporte TPU pies.3mf
CR6 SE Cable clip Guide with bowden Tube holder
I got fed up with existing tensioners for my printer and made these ones from scratch. You're gonna need four M5 bolts, two for the tensioners and two for mounting the Y tensioner. The required length is anywhere from 1 to 2cm, depending…
Not mantained anymore Switch to this model instead, which I made in CAD myself and it is easier to mantain and create newer versions (and you can also do it yourself because the step files are provided)…
I bought a WhamBam magnetic PEX buildplate for my CR6 and wanted to punch holes in the magnetic sticker for the build plate screws. This is NOT exact measurements for the screws, but it was good enough for my purposes.…
This is a toolholder for my Creality CR6 SE 3D Printer
I was so grateful to find that grdesign had already done all of the “heavy-lifting” to design this model. (see original at https://www.thingiverse.com/thing:4893737/files) The only problem I had with the original version was that the…
This replaces the right-hand side glass bed clip. This does not work with the standard CR6-SE screen as the wipe crashes into it. You will need to find a kitchen brush - the size should be 32x9.5mm around the top of the brush. This is the…
Didn't see the need to take the Filament Sensor apart just to raise it up to meet the new Dual Extruder I had installed, so I modified this model to work with out the need to take it apart. Printed in PLA Infill: 30% Supports: Touching…
CR6 Linear Rail Hotend adapter Project under development! I'm working on some adapters that might make is easy to mount the stock hot end onto linear rail using an MGN12H carriage. Mounting the rail on the front of the x-axis does move…
Description Since I am quite limited in terms of space due to my Original Creality enclosure, I have designed a short filament guide that can simply be attached to the Z-axis guide. Print Print without support 50% Infill layer height…
You have a part mounted on your thing at position A, and you need it to be in position B, using the original screw holes at A. This is what you need. This will create an adaptor or jig that mounts to the part's original location and…
Easy CR 6 SE Cable Guide V1 has a hard top edge and corners V2 has a more rounded edges V3 Is 4mm taller if you like the clip please hit that like button and post a make pic :)
Overview: This mount is part of a growing series of mounts for different hotends and extruders to the CR-6 strain gauge. The series includes the Dragon, Mosquito and MicroSwiss hotends and the Orbiter V1.5, LGX Lite, Mjolnir and Bowden…
This model is designed to protect the second motherboard from dust and for a beautiful visual appearance.
I had made the mount because I didn't want to keep the spool on the side while I had the printer converted to direct drive. I found nothing else and the mount I did use before made me nervous about how to keep the spool. Material - PLA…
This contains two items; A remix of my own “Creality CR6 - Sherpa Mini Mount” (https://www.printables.com/prints/258342-creality-cr6-sherpa-mini-mount) to be able to fit the “CR6 5015 part fan shroud dual fang” from K2van…
Overview: This mount is part of a growing series of mounts for different hotends and extruders to the CR-6 strain gauge. I will be porting the designs from the GitHub (https://github.com/KoenVanduffel/CR-6_Strain_Gauge_Mounts) where they…
Just a remix to mount the ADXL sensor on the PEI sheet because I have a handle and it is difficult to use any other accelerometer mount. This is easy and quick to install. You are going to need two heat inserts (M3x5x6) for the center…
UPDATE 15/01/2023 Added a stability clip to prevent movement, uses 2x m3 x 10mm screws with 2x m3 nuts (nuts on the inside) or alternatively superglue it to the printed shroud printing settings PETG or ABS 40% infill TREE SUPPORTS!!…
For CR6 SE i replaced the stock display and firmware with Klipper and mounted a RPI 3 with a touchscreen instead, all the screws that I used are M3x16mm. I took out the cable from the display and added a DC-DC Step Down from 24v to 5.1v…
Elevate Your Printing Game with the CR6-SE / CR10 Spool Holder! Tired of the messy spool unwinding issues during your 3D printing journey? Meet the CR6 a-SE / CR10 Spool Holder with a smart 30-degree offset design, curated to streamline…
Inspired by the mount posted by M.Kanawati, I repurposed and remixed the Cable Holder model in the Fusion360 model posted by K2Van to make this bespoke bracket. With this bracket, I secured my Adafruit Adxl345 sensor to the face of the…
To be placed on the extruder to guide filament through teflon tube to keep humidity out
Updated: Uploaded a newer and better version for the ones that still use this duct. It looks better and have fewer artifacts and problems Edit: Uploaded another 40mm design - I am using one that is similar Just a remix (a bad one, because…
when i was browsing for light bar for the CR6-SE i didnt find any i liked so i designed this one. its pretty stright forward to print unless your bed doesn't fit the one peice bar, so i split it in two. i did this and super glued it and…
I moved my spool holder to the top of my CR6, because I upgraded to Direct Drive. When using TPU, I noticed that the filament did not feed very well on the stock spool holder. I designed and printed this one, and it is working great so…
Did a quick design for adding the older creality style hotend to the CR6. I printed it out to make sure it all fits. Be sure to add a washer in-between where the hotend adapter bolts onto the metal bracket create a gap for flexing. Tested…
Updated on 09-02-24: Added models “Persano_Duct_for_the_CR6_SE_-_Base_V4” and “Persano_Duct_for_the_CR6_SE_-_Base_V4_stronger”, that has some minor improvements. The stronger one has a thin part below that helps the sides to not bend and…
[CR6SE] Direct Drive and fan shroud dual fan for duel metal gear extrusion
This is a design I remixed for the CR-6SE that allows for a direct drive upgrade with a Duel Extruder Gear, similar to the image below The need for this is because the coupling for the PTFE tube is positioned higher to allow clearance for…
A tiny spacer offset to lock the strain gauge in perfect position and allow accurate measurements on the CR6.
CR6SE SILENCER just use double tape……
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro Vas original reseni drzeni cabelu od bedu do zakladove desky pro tiskárnu Cr6 Max. Budete potřebovat sroub M3x10 Tisknuto bez podpor Preji pekny zbytek dne
Designed by me, I was looking for a way to hold the bowden tube straight without affecting the weight of the hotend, fixing any misfires of the optical sensor, and above all, fitting perfectly in the CR6-SE printer. After several days of…
simple clip For the Creality CR6se Bowden tube & ribbon cable
09.05.21 Added a clip for the hole that the wire comes out of. Angles it up so the wire doesn't catch on the stepper motor. There isn't really a better solution without to route the cable a different way, or replacing the entire cable…
A Sherpa Mini mount for the Creality CR6 (with stock fan shroud).
CR6-SE LCD Cover - SteamPunk This is a SteamPunk themed LCD cover for the Creality CR6-SE 3D Printer. The Frame should be printed face down without supports. Individual objects need to be super glued. Please, consider subscribing to my…
This is a mounting adapter use the Orbiter 2.0 Extruder(and sensor if desired) with the CR6-SE Printer. As it uses one of the mounting holes for the stock enclosure, it is not currently compatible with the stock part cooling fan(which is…
**** Hold Off printing this as there are a few geometry errors that need to be fixed. I will be updating the STL file soon. *** This was a quick and dirty remix of the original “CR-10 Smart CR6 Direct Drive Upgrade to Bondtech LGX Lite”.…
Printer: Creality CR-6 SE Layer: 0,3 Infill: 25% I use this camera mount for the pi-cam: https://www.thingiverse.com/thing:3226626
soporte que modifica la creality cr6 max para extrucion directa con el motor y piñon de la maquina nesesitaras cable para extender el motor extrusor y etrusor metalico mk8 tubo Capricorn
Flag of the Czech army. The flag is adapted for use on CR6SE. Printed flag up and without supports. The filament colour change on 4.68mm. Glued with hot melt gun.
I made this because I am modifying my CR6 and found broken parts. Without the tensioning plate, the knob does not pull back the y axis's belt gear and therefore makes the y too loose to move with the stepper motors. It is close enough…
This is a mount for Raspberry Pi-Camera to the Creality CR6-SE printer. Print Settings Printer: CR6-SE Rafts: No Supports: No Infill: 20 Filament: Greetech PETG black
I made this for my CR6-SE so I could put all the skirts, purge lines and filament scraps in - so I don't have to go to a bin every time. The base slides into the 2 slots in the 40mm x 40mm extrusion on the base of the printer. 10 holes (5…
I did not want to remove the handle + needed something to hold the serial mount
The simple LED light bracket that fits my Led tube light from the old fish tank (aquarium) Print: At any quality Supports for R and L parts Infill: 20% Remixed from: https://www.thingiverse.com/thing:4879765
filament sensor sits on top of this model and guides the filament from the top
A first go at a mount for the LGX Lite and Mosquito extruder to the Creality CR-6. Detailed description and instructions will follow. As the design follows the same phylosophy as the mounts for the LGX Lite & Dragon and Orbiter & Dragon…
Z brace specifically designed for the CR6 with clearances in mind. Can be used on any aluminum extrusion printer style, mounted in the back or in the front (more common for more angle). Can by used with any round tube by changing the size…
Case and mount for the BTT TFT35 V3, for use on the Creality CR6-SE. There two mounts included, one for the left side of the printer, and one for the right side. For use with the BTT SKR CR6 aftermarket motherboard. 2-28-21 -Edit:…
This is a mounting adapter to mount a E3D Revo-CR on a CR-6 family of printers, in my case it was a CR-6 Max
Extra Materials needed M3 inserts and screws M3 Vslot nuts The entire thing is held together using M3 inserts and bolted to the frame using the VSlot nuts Print Each Wall file twice
CR6-Max printers use a NEMA17 42-60 stepper motor for the Y-axis movement. The motor comes with a dual axle / shaft extending about 65 / 68mm from the motor with belt pulleys on each end. The long axles have been known to snap in some…
Replacing the standard Ender CR6 SE extruder with one of the many dual gear clones requires to modify the path from the filament sensor, eventually requiring to leave the filament sensor hanging, because the dual gear extruder are thicker…
I like the original https://www.printables.com/model/175549-cr6-top-gantry-spool-mount model, but it bothered me that the tolerances in mine allowed the spool to sag a tad toward the unsupported side. I decided to remix that model to…
The CR6 Gauge-Mounted Direct-Drive conversion suite posted here by K2Van is an elegant and very well-engineered design. This “tweak” simply cuts-out some of the plastic, in the shape of the Creality logo that is on the stock hotend…
The original X-axis belt tensioner locks the screws from the rear of the profile. If the locking is too hard, the plastic parts will break and become loose. This solves this problem. The screws will be locked from the front of the profile…
For Creality Dual Gear Extruder Just a remix that I made because i was getting slight problems with the actual model. Reduced the size a bit and made it simplier in the exterior (just for looks, not functional but might save some…
The extruder on my CR6 SE was terrible so I replaced it with a Winsinn dual gear extruder from amazon. This however lifted the path of the filament by 10mm and it was no longer in line with the filament run out sensor. This is a 10mm shim…
pieds pour surélever l'imprimante , améliorer la ventilation sous l'imprimante utile surtout en cas de modif de ventilation carte d'alim anti vibration imprimer en TPU
I'm to share my latest idea for a modular hot end and extruder mounting systerm for the Creality CR6 style printers. This design is all about giving options and flexibility for mounting hot end and extruder combinations. With a modular…
BTT Smart Filament Sensor NEMA 17 Mount for CR6 Step file from Grabcad: https://grabcad.com/library/btt-smart-filament-sensor-1 Changelog 2021/03/30 - Initial commit Design Autocad Fusion 360 Slicer Ultimaker Cura 4.8.0 Printer: Creality…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro Vas vedení filamentu pro tiskárnu Cr6 Max. Jde o možné řešení, když mate filament na zdi vedle tiskarny. Filament se pak nemota do konstrukce a tak nemuže dojit ke…
it's a bit stronger as the original. fit with the cable guide. Die original Halterung konnte ich nicht montieren, da ich eine Kabel-Hilfe motiernt habe. Ausserdem ist dieses Teil mit Streben verstärkt Print Settings Printer Brand:…
It's a Remix of https://www.thingiverse.com/thing:3090773 I changed the design so that it fits perfectly on a Creality CR 6-SE. I enlarged the hole on the SD card so that you could easily take it out. As an alternative, I have attached a…
Pi4 Case ans Pi Cam 1.3 Case and mounts for the X-axis on the creality CR6. I have recently started using klipper on the CR6 and created this Pi4 case to mount on the side of the printer and also a mount fo the Pi Cam to attatch to the…
I was looking through the printer foot models here, for inspiration, and these gave me paws… Each foot bolts to one corner of the printer frame. Requires 1 X M5 x 35mm bolt + 1 x M5 t-nut (EU20-M5x10x6), per foot. I printed my feet in…
A mount for Sherpa Mini and 5015 on Creality CR6. Including an amateur-optimized 60 degree dual fang fan duct, that allows both good airflow and visibility of the print. A 90 degree dual fang also included, airflow is similar (slightly…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro Vas držení cabelu na profil 4040 pro tiskárnu Cr6 Max. Jde o možné řešení, když zničíte puvodni sponky a mate radi original nahrady. Vyrabeno z PET G a je mnohem…
Updated on 28-12-2023: Fixed the model. I just saw the model has some errors so I recreated it from scratch using onshape. Now it looks a lot better and works as intended. Also removed 1 pair of holes for the 120mm duct. I recommend the…
CREALITY CR6-SE ORGANIZADOR CAJON. SIN SOPORTES. POCO MATERIAL - SIN SUELO. CABEN MUCHAS COSAS Y QUEDA ESPACIO LIBRE. DRAWER ORGANIZER. NO SUPPORTS. LESS MATERIAL - WITHOUT FLOOR. MANY THINGS FIT AND THERE IS FREE SPACE. Category: 3D…
I have seen an excellent guide to utilize the BL Touch on my Creality CR6 SE instead of that CRAPPY nozzle sensor. I have not found a good mount, so I designed two, an initial basic design and an improved design where the BL Touch sits as…
Lightly improved strength for the Orbiter 2.0 CR-6 strain-gauge-compatible mount.
![[CR6SE] Direct Drive and fan shroud dual fan for duel metal gear extrusion](https://media.printables.com/media/prints/829859/images/6399130_bffdacaa-239d-4a98-9aec-c81844dbbf86_96dc6b30-057c-4e24-8db2-235873136c0c/ekran-goruntusu-2024-04-02-191236.png)
