1 / 5
Printer Paws for the CR6-SE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printer Feet, remixed for bolting to the CR6-SE 40x40mm extrusion frame. Insert the original rubber foot as a pad.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I was looking through the printer foot models here, for inspiration, and these gave me paws…
Each foot bolts to one corner of the printer frame.
Requires 1 X M5 x 35mm bolt + 1 x M5 t-nut (EU20-M5x10x6), per foot.
I printed my feet in Transparent Sea Green PETG
- 0.6mm nozzle
- 0.6mm line width
- 0.25mm layer height
- 3 walls
- Normal support
- 40% gyroid infill
- 130mm/s infill speed
- 65mm/s wall speed
- 50mm/s top/bottom speed
Each foot took roughly 3 hrs to print.