P
PrintablesMike D
MK4 bin for use with squash ball Vibration Dampener v1
First Version of the bin for my MK4. Fits on the right side of the printer in between the squash ball dampenerl.
- Downloads
- 33
- Likes
- 4
- Rating
- 5
Search results: dampener
147 models
P
PrintablesThisfact
AnkerMake M5/M5C TPU Vibration dampener feet
After implementing the vibration reducer feet on my 3D printer, I have noticed a substancial reduction in the amount of vibrations that the printer generates. In fact, my tests have shown that the feet are able to reduce vibrations from…
- Downloads
- 852
- Likes
- 180
- Rating
- 4.83
P
PrintablesPeliX3D
Door stop dampener TPU / Türstopper, Türdämpfer
English part: This is a very simple door stop/dampener, which is printed in TPU. TPU filament is being used to create friction for the wedge-shaped print to stop doors at any time. Furthermore, I wanted to provide even more protection, so…
- Downloads
- 687
- Likes
- 80
- Rating
- 4.86
P
PrintablesD'Van Howard
Creality Logo K1 side fan protection and noise dampener
I just printed them with the big flat areas on the bottom, no supports on the K1, so it you have some excellent bridge settings then you should be able to print without supports as well. The plugs just press fit into the holes around the…
- Downloads
- 457
- Likes
- 40
- Rating
- 4.67
P
PrintablesBencio
Camera mount for DJI O3 air unit on TBS Source One V5 with rubber dampeners
I designed this to accomodate the O3 camera on the TBS Source One HD V5 frame, i added the slots to fit the silicone inserts from iFlight (https://shop.iflight-rc.com/DJI-O3-Camera-Silicone-Inserts-Pro1916?search=o3&page=2). I guess you…
- Downloads
- 417
- Likes
- 22
- Rating
- 0
P
Printablesthe freewheeler
Prusa Mini | Anti-Vibration Feet Shims + Dampener Remix
Remix of Low Profile Prusa Mini Anti-Vibration Feet by Alexander Þór . This is the most effective upgrade I have made for my printer. Absolutely brilliant model. The printer wobbled after installing these dampening feet, so I modeled…
- Downloads
- 387
- Likes
- 72
- Rating
- 4.29
P
Printableskanga
Tennis Racket Vibration Dampener
Lost my old vibration dampener while playing and couldn't find it, so I wanted to make my own new customized version to print with tpu filament. Works great and saves money. Happy printing :)
- Downloads
- 342
- Likes
- 20
- Rating
- 5
P
PrintablesFourMadrone
Arctic P12 / P14 120mm / 140mm Vibration Dampener
I wanted to eliminate an audible hum I was hearing from a couple of my P12s, so I designed this 2mm dampener. You could use these with any 120mm fan, of course, but the corners are cut to match the P12 series specifically. There are 2…
- Downloads
- 293
- Likes
- 23
- Rating
- 5
P
PrintablesAlex
Tennis racket vibration dampener, various sizes
racket dampener that covers more strings than the ones you can buy, you can vary the height to vary the weight of the damper, and length to adapt to your strings
- Downloads
- 261
- Likes
- 30
- Rating
- 5
P
Printables3DParts
Vibration dampener Prusa I3 MK2
Somehow the vibration damper from https://www.thingiverse.com/thing:1707045 didn't fit snugly around the feet of the Prusa I3 MK2, so I drew a simple damper which has a bit large fit for the feet. They do an awesome job dampening the…
- Downloads
- 236
- Likes
- 21
- Rating
- 3
P
PrintablesstevQ
Side panel resonance dampener for Orignial Prusa XL
This part creats some tension on the metal side panels of the Original Prusa XL, which leads to less resonance on those while printing. Effectively reducing the rattle sounds on thos panels (only). If the part alone is not helping enough…
- Downloads
- 198
- Likes
- 54
- Rating
- 4.91
P
PrintablesManuel Beeler
Bottom panel resonance dampener for Prusa XL
The original remix (v1) worked not as good as I hoped, so I made some adjustements. V2 is online now, way more rigid due to internal modeling, the effect of witch you can see in the picture of both versions side by side. To add more…
- Downloads
- 190
- Likes
- 60
- Rating
- 4.86
P
PrintablesPrime Senator
Prusa Mini Silencer/Dampener
Much quieter, printer likes to shake with it, but the benchy still came out great. Trailer: https://youtu.be/nfZgizlKO_4 Print instructions Edit: PLA will deform after 2 Days, ASA might be better ^^ Printet in Prusament PLA. Print the…
- Downloads
- 172
- Likes
- 31
- Rating
- 5
P
PrintablesMachvolum
F450 type quadcopter top with APM Dampener Mount and taller arms
I liked the design, but the mount for the apm was a little flimsy and a little small. So I took two items and mated them together. I also made the top plate 3mm instead of the original 2mm to add additional strength. There is also a file…
- Downloads
- 159
- Likes
- 13
- Rating
- 0
P
Printablesdfgxx
Tourna tennis dampener
it is like Tourna's dampener. print it like the regular size of dampener. please like, comment and post a make :) Category: Sport & Outdoors
- Downloads
- 155
- Likes
- 12
- Rating
- 4
P
Printablesjurassic73
Arduino / Servo Controlled Enclosure Exhaust Port Dampener
This is a servo controlled duct I use for my printer exhaust (120mm fan to 4" flex duct) which goes in to an attic space. The hot/cold air from the attic gets pulled into my enclsoure and my home from time to time with air pressure…
- Downloads
- 151
- Likes
- 31
- Rating
- 5
P
PrintablesAlex
Super light ring tennis racket vibration dampener
85A tpu or similar recommended very light design ~ 2 grams, but still does the job can absorb vibrations without affecting the specs of the racket too much
- Downloads
- 146
- Likes
- 16
- Rating
- 0
P
PrintablesOlitech
Tacx Neo 2T vibration dampener
This model is used to reduce the amount of vibrations transferred to the floor that get produced by the using the Tacx Neo 2T. In my opinion this makes it not only less noisy to others in the building but also to your self. Besides the…
- Downloads
- 143
- Likes
- 7
- Rating
- 0
P
PrintablesKuroiZubon
Headboard dampener
I copied FunTech1371 description: [I use] concentric sparse infill pattern, which should help out a bit with any cracks forming between the layers. PLA is plenty stiff with the geometry I made here, just push your bed frame up to the wall…
- Downloads
- 126
- Likes
- 19
- Rating
- 5
P
PrintablesMatthias
Tennisracket dampener
I designed this dampener for my wife's tennisracket. This must be printed in the softest TPU you can get your hands on. (the softer, the better it works). I had the best results with Fiberlogy's Fiberflex 30D (the blue one) but recently…
- Downloads
- 110
- Likes
- 13
- Rating
- 5
P
PrintablesErik Schmitt
Sovol SH02 Fan dampener
The main issue with the SH02 is the bad fan noise. With these 2 TPU brackets and 2 m3x4mm screws or similar you can significantly reduce the noise of this great filament dryer! Print settings: 1 wall, 15% gyroid infill, 2 top layers, 2…
- Downloads
- 108
- Likes
- 24
- Rating
- 5
P
PrintablesMake'n'Modify
Vibration Dampener Mold for Quadcopters (2 sizes)
This is a mold for vibration dampeners. Get some molding silicone an pure some dampeners ;) Here I made a video where I show you how I did some for my miniquad. Have Fun ;) Instructions Choose wich size you want and print 2 mid pices and…
- Downloads
- 108
- Likes
- 36
- Rating
- 5
P
Printablesboothyboothy
Vibration Dampeners for Wanhao Duplicator I3 Plus, Balco Touch, Maker Select
Dampeners for Wanhao Duplicator I3 Plus - Balco Touch - maker select Just to clarify this thing was primarily designed as a vibration dampener to reduce ghosting\ringing by reducing vibration transfer from the work surface but may also…
- Downloads
- 90
- Likes
- 25
- Rating
- 0
P
PrintablesMantra7S
Vibration Dampener feets for Prusa MK3/S (30mm extruded profile)
I designed and I am using these feets since the begining with my Prusa MK3S. It was my first conception. Now I can sleep near the printer. VERY EFFICIENT, but you need your spool to be not attached to the frame, because it makes the…
- Downloads
- 86
- Likes
- 9
- Rating
- 4.67
P
PrintablesSteveJohnsen
Lite Remix of 3030 T-slot Removable Squash Ball Vibration Dampener Foot
This is lite version of Liouma's squash ball foot. Various cutouts have been designed in to this remix to reduce filament use and print time. This foot uses standard 40mm dia. squash balls. It can be installed and locked into, or…
- Downloads
- 85
- Likes
- 16
- Rating
- 5
P
Printablesrobjohnc
Ender 3 Y Limit bracket for Stepper Dampeners
When adding Stepper Dampeners to the Ender 3, the Y-Axis limit switch is too far back to properly protect the bed from hitting the back of the stepper motor, which is now ~5mm further to the left. This bracket replaces the one holding the…
- Downloads
- 84
- Likes
- 8
- Rating
- 0
P
PrintablesAndrii
Husqvarna Quad Lock phone mount with cuttings for Quad Lock Vibration Dampener
Introduction Before creating this model, I tested the aluminum NICECNC and a model from Bob_58027. Both were uncomfortable in terms of height and tilt, which inspired me to create my own design. Additionally, I used a TPU spacer to fix…
- Downloads
- 84
- Likes
- 8
- Rating
- 0
P
Printablesfreedom2000
Prusa I3 MK2 dampener foot (squash ball)
Simple feet for Prusa i3 mK2s. Use "two yellow dots" squash ball. These balls are very soft so should absorb a lot of vibrations. Print instructions print time around 1h30. Print "bottom up" and use support for inside slot only
- Downloads
- 77
- Likes
- 9
- Rating
- 0
P
PrintablesBlackDragonBE
Artillery Sidewinder X1 Squash Ball Feet Dampener
A dampener I made for the Artillery/Evnovo Sidewinder X1 that uses a squash ball to dampen the vibrations. I have great results with this and modest speed, jerk and acceleration, it allows me to print small zig-zags without it affecting…
- Downloads
- 75
- Likes
- 12
- Rating
- 0
P
Printablesm3_manti-maker-man
Stopfen/Plug Stihl Vibrationsdämpfer/vibration dampener
Für die Gummi-Vibrationsdämpfer an Stihl Motorsägen wird dieser Stopfen benötigt. Durchmesser: 12mm. Passend für verschiedene Modelle. This plug is required for the rubber vibration dampers on Stihl chainsaws. Diameter: 12mm. Suitable for…
- Downloads
- 75
- Likes
- 12
- Rating
- 0
P
Printables3d_print_aux
Dampener Spring+Base for robotic mower Gardena R40li, R70li, Flymo 1200R, Husqvarna 105
This is the Base and spring for the shell of the above mentioned robotic mowers, since they are all the same with a different shell. The original Rubber Part gets brittle and rusty over time. The replacment part is 8€ *4 plus shipping,…
- Downloads
- 73
- Likes
- 10
- Rating
- 4.5
P
PrintablesPMF
Prusa XL 2T Rattling Noise Dampeners (cancels rattling noise)
If you got the Prusa XL 2T (i.e., with 2 tool heads), then you will likely also experience a very annoying rattling sound when x and y axes are engaged together during printing. This could get so loud, I was not able to print during the…
- Downloads
- 68
- Likes
- 10
- Rating
- 5
P
PrintablesMetalRa1n
HP 260 G2 mini HDD/SSD caddy screw dampener
This is a simple replacement dampener for the HDD/SSD caddy for HP mini PC. Made for HP 260 G2 mini, might fit similar models, compare your caddy to the images. It holds the SSD/HDD firmly and works well with the lock mechanism. I printed…
- Downloads
- 58
- Likes
- 6
- Rating
- 5
P
PrintablesRESTLESS DESIGN
WD My Book Vibration Dampener
Note that the dampener on the pictures has no cutout for airflow, but the .stl and .3MF files are updated versions with a cutout for air to pass through the hard drive enclosure. This is designed to dampen the vibrations of a WD My Book…
- Downloads
- 58
- Likes
- 7
- Rating
- 0
P
PrintablesstevQ
Back panel resonance dampener for ORIGINAL PRUSA XL (1/2-head)
On the 1 or 2 head Original Pursa XL configuration, there are only 2 power supplies attached to the back panel of the printer. This part creats some tension on the metal panel, which leads to less resonance on those while printing.…
- Downloads
- 58
- Likes
- 16
- Rating
- 5
P
PrintablesSlowEvo
Creality Ender 3 S1 Vibration Dampeners with Spring
Made from scratch but used this for some dimensions - https://www.thingiverse.com/thing:3316671 Just some more vibration dampeners/noise reducers, but with a spring ! I replaced the stock springs with silicone spacers so I had them laying…
- Downloads
- 57
- Likes
- 9
- Rating
- 0
P
PrintablesHitMxrker85
Creality Ender 3 Printer Dampeners / Vibration Reducers
Dampening feet for the Creality Ender 3 printer. Had originally made the feet wider but the stiffness was a bit too much. I find these to work well for the weight of the printer. Enjoy! Print each part individually on its side. Then…
- Downloads
- 57
- Likes
- 5
- Rating
- 0
P
Printableszarnold16
My Customized Tennis String Vibration Dampener with your LOGO!
Customized version of http://www.thingiverse.com/thing:1028733 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1028733 Instructions Using the following options: logo_file =…
- Downloads
- 55
- Likes
- 9
- Rating
- 0
P
PrintablesJK
Magnetic Ender 3 Dampeners
▂▃▅▇█▓▒░𝙳𝚎𝚜𝚒𝚐𝚗░▒▓█▇▅▃▂ The dampening of the 3D printer is essentiell to increase the print quality. I wanted to improve the energy reduction with magnets. As visualized in Fig. (B) two 5x5mm cylinder shaped permanent magnets are inserted…
- Downloads
- 54
- Likes
- 13
- Rating
- 0
P
PrintablesIridiumTimekeeping
Quiver Sound Dampener
Designed for a Cartel Dynamic 501 Quiver but will work with any quiver that has the same size tubes. Print all parts as is, The top part will need supports I used a soft TPE for everything, except, one of the top parts using TPU instead…
- Downloads
- 54
- Likes
- 11
- Rating
- 0
P
PrintablesRexodus
Compound crossbow dampeners
Crossbow dampeners. Print this in TPU 80A or TPE 80A (or the same area) and save €39,50. Example: https://www.jvd-archery.com/products/114288 These dampers are necessary to dampen the worst vibrations in the limbs. It significantly…
- Downloads
- 54
- Likes
- 5
- Rating
- 0
P
Printables3Dfrog
- Downloads
- 53
- Likes
- 6
- Rating
- 0
P
PrintablesMr. Togi
Vibrationsdämpfer für Ikea PLATSA / vibration dampener
Wer seinen Drucker nicht im Erdgeschoss stehen hat, der möchte vielleicht seinen Untermietern einen gefallen tun und die Vibrationen des Druckers etwas abdämpfen. Ich habe mir einen Druckerschrank aus dem IKEA PLATSA Sortiment gebaut und…
- Downloads
- 52
- Likes
- 8
- Rating
- 5
P
PrintablesJameJame
40mm and 30mm fan TPU vibration dampener
Ok so there is nothing ingenious here, but this is literally the first thing that I've ever made. It's just a little TPU thingy you put under your fans so reduce the vibration noise from these fans, especially if they aren't mounted all…
- Downloads
- 51
- Likes
- 9
- Rating
- 0
P
Printablesdfgxx
tennis dampener
tennis dampener. please like, comment and post a make :) Category: Sport & Outdoors
- Downloads
- 50
- Likes
- 5
- Rating
- 0
P
Printableslleonardd
Door Handle Bumper – Noise Dampener & Wall Protector (fits 20 mm handles)
Prevents your door handle from both slamming and hitting the wall — a dual-purpose 3D-print solution for clean, quiet operation. Design & Fit Designed for 20 mm round door handles Features a flexible spring-clamp that slides onto the…
- Downloads
- 46
- Likes
- 6
- Rating
- 4
P
PrintablesNocturnal Omen
Centauri Carbon TPU Feet for Vibration Dampener
https://www.printables.com/model/1381197-vibration-dampener-foot-for-centauri-carbon set of shoes and tread for vibration dampener feet. They make it a bit better with anti slip I used m2x6mm to attach it took 16. I printed on generic TPU
- Downloads
- 45
- Likes
- 10
- Rating
- 0
P
PrintableseBastlir
Prusa core One feet v2 - TPU dampener
I really liked the Prusa Core One Feet v2 by Prusa Guy , but I printed the solid version without the internal TPU insert slot and later changed my mind about wanting vibration dampening. Instead of reprinting the entire feet, I designed…
- Downloads
- 43
- Likes
- 18
- Rating
- 5
P
PrintablesDaerryn
Ender-3 Y Limit Switch Mount for Stepper Dampeners
Installing a stepper dampener on the Y axis of an Ender-3 causes the bed carriage to hit the motor. This can be resolved by moving the endstop 5.25mm in from the stock location. I took the idea for this part from RobJohnC and went back to…
- Downloads
- 43
- Likes
- 1
- Rating
- 0
P
Printablesdfgxx
tennis dampener
tennis dampener print it is size of a regular dampener if you have flexible filament, you can print it and use but if you not heave you can make a mold. please like, comment and post a make:) Category: Sport & Outdoors
- Downloads
- 43
- Likes
- 8
- Rating
- 0
P
PrintablesMerto_Bohan
Squash Ball Dampener and Leveler Feet for Artillery Sidewinder X1
Feet are made up of two parts. You will need four of each part, and four additional squash balls (39 mm diameter). Balls locations are a little closed (shape is a little more than a half sphere) to keep the balls in place if you need to…
- Downloads
- 42
- Likes
- 7
- Rating
- 0
P
Printables3D designer Decoration
Anti-Vibration Tennis Racket Dampener
This 3D model does not include supports; however, they can be added in Bambu Studio. It was printed using PLA filament on a Bambu Lab P1S. The design was created in Tinkercad. I hope you find it useful.
- Downloads
- 41
- Likes
- 8
- Rating
- 0
P
PrintablesKimframes
O-ring keyboard keycap noise dampener
For best performance, print model in TPU.
- Downloads
- 41
- Likes
- 3
- Rating
- 0
P
PrintablesDJ Stymie
TPU Vibration Dampener
This is a simple multi-material, low-profile vibration dampener that utilizes thermoplastic polyurethane (TPU). The dampener itself is crafted from TPU for its excellent shock-absorbing properties, while the base is made from PETG,…
- Downloads
- 38
- Likes
- 9
- Rating
- 0
P
PrintablesHamilcar
vibration dampener foot for centauri carbon
A set of vibration dampener feet for the Centauri Carbon. I adjusted the feet to fit the CC. The original model had a curved bottom which resulted in slipping across the desk. I flattened the bottom and added screw holes to allow non-slip…
- Downloads
- 38
- Likes
- 7
- Rating
- 4
P
PrintablesTangoEchoXray
3030 Extension Foot and Dampener
I needed to extend the legs on my Misumi 3030 extrusions to allow space for my z-steppers in my Hypercube Evolution build. I also wanted to try dampening the plastic-to-table interface, so I created the simple foot addition to print from…
- Downloads
- 37
- Likes
- 9
- Rating
- 0
P
PrintablesWeaponsmith
3030 Frame, tennis ball feet vibration dampener
This is a vibration frame damper for a 3030 extrusion frame. The purpose of this modification is to reduce the sound your 3d printer generates. Many tables become "speakers" as the printer vibrates, creating resonance in the table. By…
- Downloads
- 37
- Likes
- 12
- Rating
- 0
P
PrintablesThomllama
8mm rod dampener - 2020 frame
These are flex material printed 8MM rod mounts. they assist is helping to dampening the noise of the Y bed movement on most i3 type printers with a 2020 frame setup as well as possibly on other frames with 2020 extrusions. Obviously the…
- Downloads
- 36
- Likes
- 7
- Rating
- 0
P
Printableshonzikd
Low profile squash ball vibration dampener feet for y-axis upgrade MK2.5(S+)
Low profile stands to reduce the vibrations, utilizing squash balls. Greatly (really!) reduces the overall noise produced by the printer. Fits my remix:…
- Downloads
- 35
- Likes
- 11
- Rating
- 0
P
Printablesdfgxx
spike tennis dampener
spike tennis dampener please comment and post a make. it is a remix, but i don't remember from where Category: Sport & Outdoors
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
Printablescowlicks
Banjo Dampener
To store the dampener, you can loosen the screws and slide the dampener down along the ring.make the banjo more quiet.
- Downloads
- 34
- Likes
- 6
- Rating
- 4
P
PrintablesCoat
Vibration Dampener - Remix for Kossel
First of all: this is a remix of https://www.thingiverse.com/thing:1319128 and all the credits goes to the original designer. I used the original feet for almost a year now and they work great. But for an upgrade i needed more room at the…
- Downloads
- 34
- Likes
- 5
- Rating
- 0
P
PrintablesKav Sin
Tennis Racket Dampener
The purpose of me making this model was to get a cleaner final print. Some of the other rounded ones I've tried work decently; however, it could've been much better because taking the TPU brim off was such a pain. I've made it plain so…
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesLeivasDesign
Ender-3 Lack Enclosure Vibration Dampener
This design puts a compressive force on the z-axis extrusions, making your printer as stable as the enclosure. This works incredibly well, especially with your enclosure secured to the wall . I printed them in PETG to avoid creep, ASA…
- Downloads
- 32
- Likes
- 11
- Rating
- 0
P
PrintablesRedPig
K1C Vibration Dampeners
I wanted to get rid of some more vibration on my printer because it sits on a very thin table. I put a solid concrete block underneath it and it made a HUGE difference. I had some left over clear PTU from a project that was getting quite…
- Downloads
- 31
- Likes
- 6
- Rating
- 5
P
PrintablesLOL2
Aliexpress Shifter TPU Bottom Dampener Mod
copy of oldboysimracing "bottom TPU rubber pad" addon they sell. its not identical but it works and its probably better Dampens Noise and creates a better shifting experience without paying extortionate pricing.
- Downloads
- 30
- Likes
- 1
- Rating
- 0
P
PrintablesMartasSan
2.5" to 3.5" HDD adapter to be able to use dampeners
Got inspires so I made my own simple adapter, I am using it for Fractal Design Define R5 HDD drawers to be able to use dampeners. All case screws fit perfectly.
- Downloads
- 28
- Likes
- 6
- Rating
- 5
P
Printablespidow widow
Modular NAS HDD/SSD Bracket with TPU Sliders & Dampeners
Overview: This is a modular 3D printable HDD/SSD bracket designed for NAS servers and DIY storage setups. The frame is printed in PLA, while flexible TPU sliders hold drives securely in place and reduce vibrations. TPU dampeners can also…
- Downloads
- 27
- Likes
- 6
- Rating
- 0
P
PrintablesBarracuda72
TPU Dampener for Racebass Clone
TPU Dampener for my Racebass Clone for my Simrig
- Downloads
- 27
- Likes
- 0
- Rating
- 0
P
PrintablesMDesign
Qidi Tech 1 Foot Extension / Dampener
Wanted a foot spacer to lift the printer away from the surface slightly (15mm) and provide some dampening / ant-vibration but not so much the printer would wobble about. I printed using TPE which has given the perfect result, but TPU or…
- Downloads
- 26
- Likes
- 6
- Rating
- 0
P
Printablesrace85com
IKEA Ordning lip cover - noise dampener
Fit in place using glue gun - this will help with sound dampening Printing instructions: PETG will last longer recommended layer height max. 0,20mm print with orientation as shown in pictures, brim/supports not needed
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
PrintablesGolden Heart Co
Dog Tag Dampener
Install on a split ring between 2 or more metal dog tags to disrupt the higher pitch jingle of metal on metal to the softer pitch of metal on plastic. The Blank Tag file can be modified for personal use to add pets information to further…
- Downloads
- 25
- Likes
- 7
- Rating
- 0
P
PrintablesEatMyNoodle
Nevermore Owl - Servo controlled Air Dampener
I made this because i wanted a way to be able to exhaust my air out of my chamber if it was to hot.
- Downloads
- 24
- Likes
- 8
- Rating
- 0
P
Printableshonzikd
Squash ball dampener feet for y-axis upgrade MK2, MK2.5(S+)
Simple yet extremely effective squash ball stands to reduce the overall noise of the printer - I was really excited to hear the difference. The printer is now almost unaudible - the loudest component is the fan now. The stands are to fit…
- Downloads
- 24
- Likes
- 6
- Rating
- 0
P
Printableso._sim_.o
VAG / VW Rear Hatch Bump Stop Rubber Dampener Replacement for part 6Q6827499C
Many VAG cars from (VW, Skoda, Seat) have a bump stop to keep the rear hatch firm without creating rattling noises while driving. With my Polo V, I was wondering where the noise was coming from until I saw that on one side the rubber was…
- Downloads
- 22
- Likes
- 5
- Rating
- 5
P
PrintablesRaide
String Dampener for (Mey) Interceptor Crossbow
These go on the picatinny rails at the front of the crossbow. For myself they best lined up on the 2nd notch of the picatinny from the front. You can see in the picture they will deflect a little from the pressure of the bowstring which…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesMichi
Ender 3 Pro Motor Dampener
Hi, this model is for you if you want to dampen your Ender 3 Pro pressfit Nema Motors, i couldnt fit a storebought one so i designed my own. use 4 Top layers and 4 bottom layers with minimum 20 percent infill i printed mine with filaflex,…
- Downloads
- 22
- Likes
- 8
- Rating
- 0
P
Printablesthesquirrelyengineer
Corner Bumper & Vibration Dampener - Parametric
A corner bumper to protect the corners of objects. It will also reduce vibration when printed correctly. In order to get the proper effect, this is best printed out of TPU or similar material. A Fusion 360 parametric file is included so…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesSnarky
EGO Z6 Anti-Rattle Dampeners (improved)
I was tired of my mower deck banging and rattling around while driving across the yard at higher speeds. Much of the rattle comes from the bare metal rod that the front of the deck hooks to, and there is more rattle in the back hanging…
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
PrintablesBreakmate
Rokform Magsafe Adapter for Quad Lock Vibration Dampener (Parametric)
This idea has been bumping around in my mind for a while now. I want to protect my phone from the vibrations of the motorcycle, but I'm not a fan of the attaching method of both Rokform and Quadlock. Rokform's case is better, but…
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
PrintablesCaleb Robinson
2016 Ford Focus Air Vent Dampener Linkage
Given the complexity of the part and my limited experience in CAD, I tried Meshy.AI and was able to export it to STL and fix the dimensions somewhat in my Elegoo slicer, not perfect but might update later and remove the AI if I am able to…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
Printablesnullz
Dampener for Anycubic Kossel Magnetic Effector/Arms 45mm
v1.3 Upgrade - I did 3 times thicker, to be stronger, totally fail. I need to change my mind. v1.2 Upgrade: - I started design again so object is solid (easier to modify) v1.1 Upgrade: -Boundaries are rounded with 0.4R -Rotated 90º so it…
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
Printablespaul020559
Mk4/s Z-Rod Dampeners
Based on Japato110's design I added a support leg that clips over the top of the Z bearing part, otherwise the original dampeners tended to move down. PETG at 15% with Organic supports and no brim. Only the overhang at the top needs…
- Downloads
- 18
- Likes
- 1
- Rating
- 5
P
PrintablesКонстантин К
nissan almera classic b10 accelerator pedal dampener
Sorry, this one in Russian: Демпфер педали газа для nissan almera classic b10, замена штатному. Меняется, если много ошибок по педали и/или обороты двигателя около 2000 и двигатель мало или никак не реагирует на нажатие педали.
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
PrintablesScatterthought
Sound Dampeners for Teenii T1 Mechanical Keypad
UPDATE: I returned the Teenii T1, because it didn't work well for my purposes. It seems that you can no longer buy it and the manufacturer site is dead, but I'm leaving this model up anyway. --- These sound dampeners are for the Teenii T1…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesNompas
Dampener for Ikea Bekant PC mount
These dampeners are designed to be printed with TPU to have a softer surface than the original mount. Instead of these parts you can also use some rubber or felt you may have lying around. Simply print the parts with TPU. They will be…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesCornyCruncher
TPU Dampener Sleeve for Ultimaker 2 Feet
Instead of using Cushoning or similar, these TPU caps can be pulled over the Ultimaker feet. You can find the matching printer feet from Mape here . Print Settings Printer: Ultimaker 2+ Rafts: No Supports: No Resolution: 0,2mm Infill:…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesHamilcar
Longer LK5Pro vibration dampener foot
A slightly modified version of the LK4 pro foot adapted for the LK5 pro. Adding rubber non-slip pads will decrease any sliding on the desk. Works well when printed with PETG.
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesTownDrunk
FLSUN Extruder Vibration Dampener/Noise Reducers
FLSUN Deltas are notorious for extruder noise. This mod is intended to work with the thick metal (stock) extruder mount, either in it's stock position or when relocated to the side like the SR delta. I would assume most, if not all FLSUN…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
Printablesbishoprob528
Razer keyboard square key dampener
Print in clear TPU for best results.
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesBusted
Umarex Gauntlet 2 SL30 Barrel Harmonic Dampener
This is a harmonic dampener I made for the SL30. It helps reduce harmonic vibrations, center, and stiffen the shroud and barrel assembly. It is meant to slide over the barrel and allow the shroud to slide over it. Installing is pretty…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesAl Mon
Cabinet Door Dampener
This is a quick and simple print that allows you to replace or add dampeners to quiet those noisy cabinets and get rid of the slamming/slapping noise. Many of mine were corroded due to ozone attacking the vinyl material. Simply print as…
- Downloads
- 16
- Likes
- 5
- Rating
- 0
P
PrintablesExtra Fox
![[Printer Box] Feet for Sorbothane Dampeners](https://media.printables.com/media/prints/409088/images/3399489_5231780d-fc01-4b4c-b9f6-5fb048f98db0/2023-02-25-11_06_17-photo-google-photos-mozilla-firefox.png)
[Printer Box] Feet for Sorbothane Dampeners
In addition to my printer in the enclosure, I also wanted to isolate vibration through the enclosure as well. So I modified the feet for the printer box to accept a 50mm x 50mm square of sorbothane pad. Shopping List Sorbothane Pad…
- Downloads
- 16
- Likes
- 3
- Rating
- 5
P
Printablesdigitaljunk
Silicone Heatbed Dampeners CR-10 S5 - Mold, Cast
Mold for S5 Silicone Dampeners. for M4x50mm Hexscrew Category: 3D Printer Accessories
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesJetcrayon63
Cabinet Wall Protector and Sound Dampener - Cylinder
A simple wall protector for cylinder handles to prevent hitting the wall. This will protect the wall while also providing a noise reduction with the printed part. Print will absorb impact from the handle. Recommended in TPU for noise…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
Printablesfreedom2000
dampener plate for Prusa i3 MK2 (squash ball)
You all know that the geometry of Original Prusa i3 MK2 is quite tricky. When you have a flat and square frame, you would like to keep it flat ... a long time ! However if you move the printer you may wrap a little the XY frame and loose…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printables3DCheck
3D Printed Dampener
I used this Dampener to dampen a wooden flap which weights about 10 to 20 kg. I used 2 Dampeners. The housing is printed in Green Extrudr Neon PETG and the Black Part is printed in Extrudr FLEX Semisoft. I designed the Dampeners for this…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesBimmer Prints
BMW M60 Belt Tensioner Dampener Bushings
After 30 years and nearly 300,000 miles the dampener bushings on the belt tensioner on my 530iT were hard as a rock, crumbling and loose. The OEM replacement is now $250! Print these in TPU , I used Overture High Speed TPU on my Bambu A1…
- Downloads
- 14
- Likes
- 3
- Rating
- 0