F450 type quadcopter top with APM Dampener Mount and taller arms
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I liked the design, but the mount for the apm was a little flimsy and a little small. So I took two items and mated…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 162
- Makes
- 0
- Views
- 616
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I liked the design, but the mount for the apm was a little flimsy and a little small. So I took two items and mated them together. I also made the top plate 3mm instead of the original 2mm to add additional strength.
There is also a file for the arms that are 6mm taller because I wanted to fit a large battery in the middle rather than underneath where my gimbal would go.
Also added a file with the gps post already on the plate, and a file for the bottom plate with holes enlarged for standard gimbal attachment:)
The apm mount that I used is located here http://www.thingiverse.com/thing:160655
It is the Omnimac_APM_Mount_v1.5_bottom_plate file so the top plate must be the Omnimac_APM_Mount_v1.5_top_plate file
Thank you both for these wonderful files!
Print Settings
Printer Brand:
Robo 3D
Printer:
R1 ABS + PLA Model
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2 or better
Infill:
20%
Notes:
For dampeners use the 9mm x 13mm or earplugs :)
Category: R/C Vehicles