Ender-3 Y Limit Switch Mount for Stepper Dampeners
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Installing a stepper dampener on the Y axis of an Ender-3 causes the bed carriage to hit the motor. This can be…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 43
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Installing a stepper dampener on the Y axis of an Ender-3 causes the bed carriage to hit the motor. This can be resolved by moving the endstop 5.25mm in from the stock location.
I took the idea for this part from RobJohnC and went back to the open source CAD drawing and updated it for the 5.25mm offset and a 1.2mm fill on the two squares to match the injection molded part that shipped with my Ender 3. I also added some chamfers to the endstop mounting holes to make installation a little easier.
It should be relatively easy to turn this model back in to an injection molded part.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
25% or higher
Notes:
You will be tapping the holes for the endstop switch so I recommend slicing with at least 3 walls.
Category: 3D Printer Parts