Counting matching models…
Here is my design of the fume extractor for the Creality Falcon 2 laser engraver/cutter (22W laser). For the laser I used standard 12 mm laser module with crosshairs lens. It is designed to allow for a good airflow and prevents…
This remix allows you to fit the LIBRA extruder without trimming 2mm off the K1 toolhead carriage, however instead you will need to trim 1mm off the side of the orbiter gearbox housing. Caution. This may allow oil or dirt from the gearbox…
For fast printing, I lacked rigidity. That's why I created this Y-motor mount for a belt 9 mm with a support bearing. This Y-motor mount is suitable for printers: Ender 2 Pro, Ender 3, Creality CR-10, Tevo tornado and Sovol SV01. Also,…
This riser is mounted and assembled using M3 screws making it rigid and reliable. Also, it is easy to print with high quality. You will need: M3x30 - 4 M3x5 screws - 8 M3x4.5x3 heat inserts - 8 Vents are not needed (but can be added) if…
layer height 0.2. used 5 walls , just use as many as you would like Its a small piece so wont take much time so better make it robust. Material Used - PETG, or any you would like . like PLA Tolerance - 0.25 Supported PTFE Tube - 4mm OD…
I made some modifications to the screen holder from this project https://www.printables.com/model/862834-guppy-screen-display-holder-for-creality-ender-3-v to allow access to the USB port.
Convert the stock Creality Ender spool holder into a standalone holder, using this base. Useful to either remove mass from the top of the gantry to reduce vibration, or for a second spool if you're using a dryer/other side mounted holder.…
I bought a filiment dryer and made this to direct the filiment straight through to the print head Printed it without any supports 8% infill 3 walls
I raised the height to allow the filament tube to be outside the chain, this allows the tube to be less crunched.
If you like my work consider supporting me on boosty , thank you.
Hi guys, We all must give BIG THANKS TO Justin Fritz because he was the person who asked me and helped me a lot to make this model together. I don't have the latest revision of the K1 MAX, but with the help of his tape measure and a few…
This bushing prevents the bowdentube from being pulled into the dryer box when filament is being pulled by the extruder. Printed in TPU.
the additional cover for the motherboard housing created when the motherboard is removed from the printer
I needed to lower the spool holder on my printer to clear the cupboard above it, so I made this. It's a copy of the original design, but much shorter. I don't think it will be compatible with runout sensor
Slightly tweaked mount for the BTT Eddy to use the LIDAR USB header on the tool head of the Creality K1 series
The smaller version of spool holder was designed. Total length is - 83.5 mm, and 73 mm sticks out when it's installed. I hope you will find it useful. Hello from Ukraine)) 3D printing settings Printer Settings: 3 walls - 0.4-0.42 mm 3-4…
camera mount for ender 3 v3 se/ke for creality crcc-s7 camera that comes with the creality box 2. requires no supports or any other special instructions and attaches the ¼ printable camera screws available.
The generic purpose of this tray system is to regenerate silica gel with indicator, after losing its absorption capacity, in a Creality Space Pi Filament Dryer or in a Creality Filament Dry Box 2.0 (this was suggested and modified by…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
To have this properly fit a K1 SE, you'll need to print the parts below: Cable Links x24 - https://www.printables.com/model/827586-creality-k1-cable-chain-sagging-fix Front chain support x1 -…
Use M3 x 10 bolts try to use flatter heads on the bolts for easier usage. The Indented version is for my specific hot end that I printed so you may only need it if you have the same one.
Понравился дизайн,переделал для Ender 3v3, тем более для этого принтера вовсе нет никаких крышек,а моя сломалась... Скрестил оригинал и от k1.
The model was printed on Ender 3 V3 SE with default settings for hyper PLA plus the tree supports. on the printer I increased the nozzle temperature on the printer to 200°C and bed to 60°C. The filament used was the white filament that…
LID RISER V3 [FRAME EXTENSION KIT] | Vents | LED Strip | Hinges *If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉. /////ATTENTION *Because of the seam inside the walls, the…
Falcon2 Pro Collection This is a holder for a 5V 5mW laser crosshair pointer for the Creality 22w/40w/60w laser module used to line up material on the bed for cutting accurately and set back far enough so as to not collide with the front…
If like me you buyed an a older version, you may noted that is a little more large than the printer, here is the fix
Falcon2 Pro Collection This is a bracket to hold a Wyze V4 or V4 camera($20-30 off Amazon) in place to observe your cutter remotely. The Wyze software to view your camera is free. I wanted a way to keep an eye on my cutting while in other…
Falcon2 Pro Collection I had smoke creeping out the crack between the exhaust hose adapter and the side of the enclosure as well as the hose connection where the wire wraps. I replaced the fan grill with this foam gasket cut from 2mm…
After spending a solid week dealing with the drag chain issues on my Creality K1 Max—caused by low tolerances in the chain's joints—I began testing various user-made solutions on Printables. Some worked, while others didn’t. Ultimately, I…
Falcon2 Pro Collection A TPU brace to hold your slats in place so they don't shift around when putting material on the bed to cut precisely. Print two sets to fully cover the slats in any orientation. Print as oriented. Default FLEX…
Hi, I have developed new PTFE clips for the K2 Plus and have also modified my K1 bowden clips to be compatible with the K2 Plus. Currently, there are two designs available: one replicates the original factory K2 Plus clips, while the…
Edit New MK2 Version available at the link bellow https://www.printables.com/model/1589437-creality-cfs-silca-gel-container-mk2 I didn't like the idea of having to buy the expensive desiccant for the CFS so I created a container to fit…
side tray for the righ-hand side of the Ender 3 V3 SE. Clips on at the back loosly so easy to remove.
if you have problem with your build plate being to low on your build plate you can add these spacers to make the bed higher i printed this for my creality ender 3 v3 se and depending on printer and printer settings its around 0.5mm spacer.
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
Zůstala mi deska z-stopu a tak jsem předělal celí držák ….
Gridfinity 1x1 holding 4 Creality nozzles in the square plastic tube, might also hold other brands or other objects: Fitting square sizes: 12.5x12.5mm ~ 13x13 mm
You can mount it on the highest point of the printer or the lowest. (You can find example in the pictures.) Please print it at higher infill, so it doesn't snap off. (I recommend 30%+ infill.) I also recommend printing it at slower speeds…
I print larger prints that take up most of the bed for my business and 1 of my K2 plus's bed magnet was coming up from the print warping a bit. I designed these clamps to assist on holding the bed and print. It works great no warping…
Upgrade your K1SE with side panels or repair your K1 / K1C / K1MAX I recommend using the plain panels if you plan to print high temp filament or want to keep the sound and fumes down, but have provided semi-open designs to combat heat…
This easy mod is a simple yet effective way to extend your lead screw service interval by protecting it from getting covered by debris that may get blown off the bed when the fans are running, especially during a nozzle wipe or a failed…
Creality Falcon 2 40W Laser Crosshair Bracket Should fit all the Falcon models. Used this as inspiration:…
2 magnets (max dimension: 15x8mm) are needed to attach it to the back. (I used 15x5mm). This makes it easy to empty the container. Magnet cower should fit snugly. The container has the necessary distance from the wall so that it does not…
I was annoyed with the bowden tube's awkward bend, being attached in the back of my K1 max, while I had changed to a side-mounted filament spool holder. So I made this over-engineered bowden tube side-mount. It's best to print it slow, as…
There are 4 different options: 2 simple inserts, and 2 one-piece designs that raise the printer. The stiffening feet inserts are a great first mod, without the need for tools, experience or fancy print settings. Simply print 4 inserts and…
I needed a place to put my laser cutter when not using it. So I mixed up a wall mount for the creality falcon 2 laser engraver/cutter The model is made to fit with the legs/extenders attached, but it will also fit without the extenders.…
I don't why couldn't find any mount for nebula on k1se so I decided to make one and buy it :D you're gonna need 2 of the 3 screws you removed from the bed/z axis when you bought it(i didn't wanna goi outside look for the same size of the…
I had the problem on the K1C of the tool head opening the door when homing, I don't wanted to cut the stock top hinge so I printed this piece 100% infill using ASA CF see original:…
Falcon2 Pro Collection This is a set of half fan intake shrouds to help the laser unit not pick up particles from the surface being worked on to minimize build up in the cooling unit. Creality does provide instructions on how to pull the…
Falcon2 Pro Collection This is an intake shroud used to direct air over the cutting surface area. This requires you to cut a hole in your drawer. This tucks under the front so the laser head will not collide with it. This attaches to the…
Falcon2 Pro Collection These are instructions as part of my Falcon2 collection. The model is just a placeholder. The Creality Falcon can ship with a gantry that is not fully square. I had to perform the following to square the gantry by…
Falcon2 Pro Collection These are instructions as part of my Falcon2 collection. The model is just a placeholder. I needed to ensure my laser head is perpendicular to the surface where my material will sit since I plan to cut pieces of…
This is a rear Purge shoot and rear deflector for the K1 Max. This shoot needs modifying of the rear panel in order to use it. I used a 30MM Hole saw to drill the hole where the filament spool goes on the original Panel, Once I drilled…
Why this mod? Ender 3 S1 is still a decent printer, but transferring models via SD card is pain OctoPrint - and RaspberryPi-based OctoPi distro in particular - is a popular way to solve this existing mods either utilise the drawer space…
I liked the various Gridfinity bins that are available to hold Bambu spare parts, but I could not find any for my K2 Plus parts, so I created a few using the FreeCAD Gridfinity workbench
I liked the various Gridfinity bins that are available to hold Bambu spare parts, but I could not find any for my K2 Plus parts, so I created a few using the FreeCAD Gridfinity workbench
I liked the various Gridfinity bins that are available to hold Bambu spare parts, but I could not find any for my K2 Plus parts, so I created a few using the FreeCAD Gridfinity workbench
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
I have seen an excellent guide to utilize the BL Touch on my Creality CR6 SE instead of that CRAPPY nozzle sensor. I have not found a good mount, so I designed two, an initial basic design and an improved design where the BL Touch sits as…
Quick and easy to print, universal LED Strip/Bar Holder. I include a 330mm Bar holder for regular LED Strips and magnet mounts (2x 6x2mm Magnets) for metal LED Bars (See my video below) I am making step files available in case anybody…
Lets save our K1s :-) This is my linear conversion for X axis. Every version i found was complete makeover. Not this one. This is cost effective coz you reuse most of your stock hardware. Designed for STOCK or POWGE idlers. No software…
Dragon Burner mount for the Creality Spider All Metal Hotend. You'll need 4 M3 3x3x5 Heat Set Inserts. I've been using it for a few weeks and it's been working perfectly. I'd recommend ABS for the material. Here's the Hotend:…
Are you tired of the poor camera quality of the Creality Hi? Wish you could see your prints with clear resolution and night vision? I was frustrated with the camera quality of the stock camera in the Creality Hi, as are many others. I…
If the bed fits the plate model horizontally it would be perfectly printed without supports. On my Ender 3 V3 SE I've printed it on a side with supports. There is no precision compensation gaps applied between legs and plate in the model.…
My Ender V3 SE's gantry was completely out of whack. maybe 92° leaning to the back. So I looked for solutions. I did not find one I liked. It took me about a week to design and test this. The braces fit precisely to the Ender's plastic…
a little thing i designed to rise the Creality Pi Dryer above my ups unit, but you can use to rise anything you need to put in a higher place it's designed to have enough space under it for a vultech ups dimensions are: 33 cm lenght, 22…
This remix provides a trimmed Silicone Nozzle Cleaner for Creality K1/K1C/K1 Max based on this model, in order to prevent collisions with the HEPA filter adapter available here . Collisions are avoided when the cleaner is both down and…
Přidaní o matku pro uchycení bowdenu .....
Falcon2 Pro Collection In order to quiet down the beep of your Creality Faclon2, you need to put a few layers of tape over the beeping module on the control board(red highlighted module) with blue tape already in place which is located in…
Use same printing as recomended by the original. Remixed in Autodesk Fusion.
I made this one for my Creality camera. The one that came with printer I'm not crazy about it. With this one I have a better view of my print plate. Use two way tape and position bracket to your likings. The camera is plug in to the USB…
The Creality CFS desiccant setup leaves a whole lot to be desired. The packets that come with it are lame and single use. I tried making the desiccant holder that fits in those two slots, but in the end, only the top of the desiccant is…
This is Version 2. You can move up or down I made this one for my Creality camera. The one that came with printer I'm not crazy about it. With this one I have a better view of my print plate. Use two way tape and position bracket to your…
The model can be printed without supports. It should fit most ender 3 compatible spoolholders/spoolrollers. This model does for sure work with https://www.thingiverse.com/thing:3209211 this spool since its the one in the picture
I had some issues with original files. The CR Touch Sensor was a couple of millimeters to low. I changed it, that the sonsor sits 3 mm higher.
Print all three part. Separate the Prusa sides from the cardboard tube. Insert the male and female screws into the Prusa sides from the inside (see photo). Rotate as needed for the key to align with the slot. Insert the spacer into the…
There are plenty of different mods for the larger creality tent enclosure, but the one I bought has 8mm rods and different connectors than most of the mods that have been desgned & uploaded.…
For the conversion you will need: Size How many What to replace it with Screw (DIN 912) M3x25mm 4 pieces Screw (DIN 7991) M3x8mm 8 pieces Hexagon nut (DIN 934) M3 8 pieces Rail with block assembled (MGN12H) 300mm length 2 pieces Front and…
I created this project within Orcaslicer because I felt the need and wanted them to improve my project with the K1 extru
Created a light shield. This was one of my first prints after I installed the light bar - and I quickly tired of the light shining in my eyes all the time. I think it turned out pretty good!. I was so new to 3D printing, it never occurred…
Got a K2 Pro and you don't like that PTFE tube happily scratching a weird trapezoid into the glass top's coating every time the XY-axis move? Understandable. This basic vented riser lifts the entire glass top and gives your PTFE tube a…
This hub was designed to be used in conjunction with my custom 8-line Pico MMU. The model was remixed with the referenced models using Tinkercad. For best performance, apply petroleum jelly to the inside of the hub and the switch end cap.…
This part allows the screen to be mounted straight up next to the printer, this is most usefull for when you have the printer on a higher platform and want to see the screen from below. The datacable for the screen can just reach it. The…
updated version. Don't need sticky velcro to hold it in place.
EN: These are two 3D laser scans of a Panasonic ES-LV67 shaver using the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. The scan on the left (green) is from the Sermoon S1 and the one on the right (orange) is from the…
These custom foot inserts keep my Creality K1c locked in place during prints. Mount them to the table with screws or adhesive tape, then position the printer directly on top.
CFS Filament Removal Tools If you own and use a CFS, you will eventually encounter a filament jam where the filament will not retract. You can try to pull it backwards out back to the reel, but it won't budge. Most of the time, you're…
This Purge Bucket simply uses two Magnets pressed in place to hang on the back of the K2 for waste purge collection. I used 10mm x 4mm Magnets.
This small add‑on fills the recess left after converting the Creality K1C to 270° hinges. It mounts on the bottom plate (doorsill area) where the old door hinge was, using just one of the original screws in an existing hole. The piece…
Upgrade your Creality Falcon 2 with these professional, stackable risers. This modular interlocking system allows you to easily adjust the height of your laser engraver to fit rotary rollers or thick materials. ✨ Key Features: ⚓ Secure…
Improved version of the K1 and K1C cover seal. Added an additional wire channel.
This is a magnet-mounted waste bin and bin guide designed for the Creality K2. The guide attaches to the printer frame and provides a stable magnetic docking point for the removable bin. The bin sits directly under the purge area and…
I made this to avoid powercable getting into Z axis wheels after small incident.
Where's the problem? I love my Creality Space Pi filament dryer but printing directly from it has been slightly problematic. The Bowden tube always seems to get pulled into the dryer and wrapped up in the roll, especially during long…
Created from scratch, uses the stock nuts and hardware from a creality-style spool holder. Uses less material than other designs while maintaining strength, also saves as much room as possible for lower tents. Printing instructions:…
![CREALITY K1 MAX - LID RISER V3 [FRAME EXTENSION KIT]](https://media.printables.com/media/prints/1113589/images/8603616_60a7f138-6ba6-4188-bbf6-cdb880ec998a_f4300ca9-7596-4f4e-9ef3-f72931737ef2/k1max_projects_covers.jpg)
