Creality Falcon 2 Fume Extractor with Laser assist
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The fume extractor for Creality Falcon 2 laser engraver, with crosshairs laser assist for precision positioning.
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 324
- Makes
- 0
- Views
- 1,459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Here is my design of the fume extractor for the Creality Falcon 2 laser engraver/cutter (22W laser). For the laser I used standard 12 mm laser module with crosshairs lens. It is designed to allow for a good airflow and prevents obstruction of the built-in fan airflow,
I used M3 brass inserts to put parts together, but it can be glued together as well.
For the hose I used the standard 22mm CPAP Easy-Flex tubing that can be bought on Amazon or any medical store.
You can either use m3 bolts (preferred) or a double-sided tape to attach the fume extractor to the laser. If scotch is used, apply it to the sides too for better adhesion (there is a 0.5mm tolerance gap between sides and the laser body).
Use the following offsets for the laser (as pictured):
Axis X: 37mm
Axis Y: 42mm
Laser is wired via the switch (Micro Slide Switch 3PIN 2 Position 1P2T ON-Off Toggle Switch e.g. SS12F15VG6 or SS12F15VG5) to the USB-C connector that is being connected to the laser module USB-C socket.