Creality Falcon 2 Fume Extractor with Laser assist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The fume extractor for Creality Falcon 2 laser engraver, with crosshairs laser assist for precision positioning.
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 324
- Wydruki
- 0
- Wyświetlenia
- 1459
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is my design of the fume extractor for the Creality Falcon 2 laser engraver/cutter (22W laser). For the laser I used standard 12 mm laser module with crosshairs lens. It is designed to allow for a good airflow and prevents obstruction of the built-in fan airflow,
I used M3 brass inserts to put parts together, but it can be glued together as well.
For the hose I used the standard 22mm CPAP Easy-Flex tubing that can be bought on Amazon or any medical store.
You can either use m3 bolts (preferred) or a double-sided tape to attach the fume extractor to the laser. If scotch is used, apply it to the sides too for better adhesion (there is a 0.5mm tolerance gap between sides and the laser body).
Use the following offsets for the laser (as pictured):
Axis X: 37mm
Axis Y: 42mm
Laser is wired via the switch (Micro Slide Switch 3PIN 2 Position 1P2T ON-Off Toggle Switch e.g. SS12F15VG6 or SS12F15VG5) to the USB-C connector that is being connected to the laser module USB-C socket.