1 / 5
Filament HUB 9 Lines - Creality Ender 3 V3 KE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hub for custom 8-line Pico MMU. Uses ECAS04 and KW11-3Z micro switch.
- Rating
- 4.75 / 5
- Likes
- 77
- Downloads
- 137
- Makes
- 2
- Views
- 2,705
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This hub was designed to be used in conjunction with my custom 8-line Pico MMU. The model was remixed with the referenced models using Tinkercad.
For best performance, apply petroleum jelly to the inside of the hub and the switch end cap. I also recommend gluing the ECAS04 connectors using cyanoacrylate. You may need to change the angle of the micro switch's end of travel a little to make it work correctly with different filaments.
Required parts
- 2x m3 8mm Allen screws
- 2x m3 10mm Allen screws
- 9x ECAS04 connector
- 1x KW11-3Z micro switch
- 1x Zip tie
Print settings using PLA
- Infill: 100%
- Support: Yes
- Support Type: Tree Organic
- Raft Layers: 10
Notes
- The support cannot be added on top of the HUB, otherwise you will not be able to remove the supports from the inside, in addition to damaging the HUB.
- All models are in the correct position for printing. If you have any doubts about how to print, use the attached 3MF.
