Counting matching models…
About I used hole in the doors of the Original Prusa MINI Enclosure as an entry point for filament PTFE tube. Moved handle for fingers a bit lower, and added magnetic coupler in there for s 6x2mm magnets, which are popular in gridfinity…
Like so many others, I find that the PTFE tubes often bend a bit much right as the enter the top of the Nextruder on my Prusa XL, and could benefit from a guide that. However, I wanted a part that was simpler to print/use than the only…
layer height 0.2. used 5 walls , just use as many as you would like Its a small piece so wont take much time so better make it robust. Material Used - PETG, or any you would like . like PLA Tolerance - 0.25 Supported PTFE Tube - 4mm OD…
I made this so i can easily route two spools filament from my Creality Space Pi Plus to my Creality K1 max. Layer height 0.2. used 5 walls , just use as many as you would like Its a small piece so wont take much time so better make it…
Simple remix of the original allowing you to run your tubes closer together. I remixed in Prusaslicer using negative volumes. Includes both sides of the holder
I bought a filiment dryer and made this to direct the filiment straight through to the print head Printed it without any supports 8% infill 3 walls
Rotating URBI thing, but now, properly split up
Update 11/15/24: It was made aware that I did not include the PTFE connector that was used/fits with this adapter. Please see this amazon link:…
This fitting holder offers several distinct features: Versatility : It can accommodate one or two fittings simultaneously from the top and bottom, depending on your needs. Drybox support : By using two PC4-M10 and PC4-M6 fittings per…
Remixed of the original M6 connector , allowing to connect 2 PTFE tubes using M6 quick release connectors. Both sides are threaded.
Requirements: You will need two 25mm M4 screws for installation. I bought the Bowden parts on Amazon as a kit: https://www.amazon.com/gp/product/B0CMQN1681/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 This remix of the Elegoo Neptune 4…
A clamp to stop the ptfe from movement during retraction due to the ptfe fitting lock moving in and out of fitting. there have been 3 edits since initial release, lengthened the lock collor relief, increased its outer diameter clearance,…
It's a bit jenk looking, as I barely know how to modify an STL, but I did what I could and it should be functional. I mostly hope that the original creator will share the original 3D files or make these new and improved versions…
Bastion mods: -btt octopus mount with and without mosfet mount -cables and ptfe (M6 coupler) relief -PSU cover with and without charger mount (for Rpi) -5 inch screen mount -Rpi3 mount -bastion logo diffuser for dragonburner I also…
The 3mf includes original model remixed with numbers to either side. Prerequisites The font pictured is Transport Heavy , originally designed for street signs in the UK
Mod for the pico MMU from LH. Inward PTFE tube coupler is M10 version, outwart PTFE tube coupler is M6 version.
This part lets you use the official Bambu Lab PTFE tube coupler with the swiveling PTFE holder your A1 comes with. Good for having a direct reverse bowden to your filament dryer. Unscrew the original through the hole in the side of the…
This remix is intended for spools vertically stacked and aligned . Filament can be threaded through the back with minimal to no bends. Prerequisites The font pictured is Transport Heavy , originally designed for street signs in the UK…
I had printed out the original, but the F695 bearing i had was really loose in the arm. I adjusted the bearing tolerance to be 13mm even down from 13.3mm. This seemed to let the bearing I have pop in gently and fit snug. Let me know if…
This little jig is designed to help cut 4mm PTFE tubes with precision — ideal for Bowden tubes. The hexagonal hole holds the tube securely and has a 0.5mm slot sized for a utility knife or X-Acto blade. I made this because I was…
I like the original designs filament cutter and the fact I can automate it. Though I couldn't reliably print the bowden coupler part. Anyway I manually load/unload the filament so it's better for me to easily plug out the PTFE tube. I…
PTFE CUTTER FOR THE KOBRA S1 Just insert the PTFE and cut it along the slot and the edge of the inlet. This will result in a PTFE exactly the right size for the Kobra S1/Combo hotend.
I made this to fit https://www.printables.com/model/772459-boost-your-multicolor-prints-central-filament-sens It allows the filament sensor to still pivot. All I had to use it the original 2 screws and 1 hex screw in the back of the…
I made the side PTFE mount longer, so the PTFE tube is directly above the spool.
Ptfe holder and organizer for MMU Print Settings Printer Brand: Prusa Printer: i3 MK3S+ MMU 2S Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: Prusament PETG Category: 3D Printing
Zugentlastung des PTFE-Schlauch an dem H2D Für den Einsatz von einer AMS 2 PRO und einem AMS HT benötige ich einen zweifachen Y - Adapter , da ich diese auf der linken beweglichen Nozzle verwenden möchte. Aber ein Dreifach - Y - Adapter…
TPU feedthrough with a PC4-M10 to pass through with PTFE tube. With this you can put the roller on top and feed directly down to the extruders. Also included with a template to measure out placement. You may need to grind the large hole a…
This is an adapter that allows you to attach the filament tube directly to the print head assembly without any connectors. It is recommended to use support normal when printing for the best surface finish. This drawing is applicable to…
This is an adapter that allows you to attach the filament tube directly to the print head assembly without any connectors. It is recommended to use support normal when printing for the best surface finish. This drawing is applicable to…
MOD Sidewinder X4 Guida tubo PTFE con forma arrotondata per evitare che il tubo si pieghi. Monta sull'inserto del porta bobine.
MOD Sidewinder X4 Passa Tubo PTFE. Monta a posto del porta bobine, include foro per avvitare sensore rottura filamento.
This is a small PTFE tube collar for passthrough tubing. I have filament above one of my printers on a wood shelf, and directly feed the filament down into the printer from above. I drilled a 4.5mm hole in the shelf which takes a PTFE…
What's New in Version 2: Standard 4mm Support: Added a second set of files with a 3.8mm hole specifically designed for 4mm OD PTFE tubing, which is the most common size in the 3D printing community. Slot Design: I replaced the closed hole…
The PTFE guide is a small part to reduce the radius of the PTFE tube. It improves the filament feed. Only usable if you have installed a height extension cause without there isn't enough space for this part. The original height extension…
This is a combination of 2 mods I have used for https://www.printables.com/model/705295-creality-ender3-v3-ke-anti-shake-construction I installed to beef up the frame on my Ender 3 V3 KE which suffers from a wobbly Zaxis design , this…
If you do not want to unload the filament this model is perfect for you
Often cardboard spools are quite rough and tend to jump out of position with a onesided spool holder, therefore i designed an internal spool roller with 4 individual rollers. Moreover you are able to load the filament from the front,…
I recently installed the sliding riser with PTFE tube relocation , but I wasn’t happy with how the tube would push back out of the enclosure. It rattled against the back of the machine and sometimes even hit the wall behind the printer…
This is a ¼" version of the a model by @mixon, which is a 45 degree version of the "Drybox filament guide using PTFE tube" made by @mp42, available for OD4mm and OD3mm PTFE tube. If the inside diameter of the fitting is too tight, it may…
Remixed Helixios's nice model to add a 1.5mm rad to the PTFE protrusion, to reduce risk of cracking. I also changed the PTFE protrusion to use M6 threads which is the PTFE adapter I have available. I personally printed mine vertically in…
The clip inner dimensions are 9.7mm x 15.4mm and a very generous 2.4mm clip overlap, so wont come off easily. The tube hole is 5mm to facilitate easy tube movement that is typically required in a chain guide setup. The inner bump is…
Why and what for This will allow you to connect 4mm OD (standard size) PTFE Tubing to Autofeeders of Snapmaker U1. You can customize all the colors. Discussion topic -…
I 3d printed a Nut but the filament still scraped on the pneumatic connector. I added a print in place ball thingy. I don't know the technical term. I printed it in PLA. The nut should be on top when printing. It's my first ever design…
🧩 Model Title PTFE Tube Clip --- 📌 Description. This is a compact, 3D-printed organizer designed to neatly manage multiple PTFE tubes in applications such as multi-material 3D printing systems. The organizer features a rectangular body…
This is a twist-and-lock magnetic connector designed to join two PTFE tubes and make filament switching quick and reliable. The connector consists of two parts that are twisted together (twist & lock) and then secured with integrated…
This is my first ever functional design. I'm definitely not an expert, I'm still learning a lot about 3D modeling and printing, so this was a big practice project for me. It might have some small errors or issues, but it’s working pretty…
Bowden PTFE eyelets for securing filament tubes: one version is designed for use with a cable tie, while the other features a through-hole for screw or keyring mounting.
PTFE straightener with M3 heat insert holes. Use M3x6mm screws to secure the tube. M3 heat inserts: M3x5x4 or similar M3 screw: 2pcs M3x6mm
This Thing is a PTFE Tube Buckler, similar to the ones that come with the QIDI Box. It helps bundle four PTFE tubes together for multi-filament boxes.
Since I have the side mounted mmu, I need to have 2 ptfe tubes, because I want to keep the filament side filament sensor. and when the mmu is in use the nextruder cable just hang on the side and could cause a layer shift. So I made a part…
There are already several models available, but none of them really appealed to me. For my version, i used two truss bearings to guarantee smooth and play-free operation. BOM: 2x F695ZZ (5x13x4) 2x M3x20 Allen screws 2x Hammerhead nuts M3…
A tool to easily disconnect the PTFE tube from the qidibox buffer. You no longer need to lift the buffer to expose the coupler. Just insert this into the hole where the tube is and push down to release the coupler and then pull the tube…
If you keep your spools on a wall-shelf or desk edge with the PTFE tubes running downward from the spools (like I do), this remix is designed for you. Since setting up my MMU3, I wasn't satisfied the flow of the filament. The angles put…
This PTFE tube guide was designed to create a clean and consistent routing of the PTFE tube from a dry box to the printer. It keeps the tube in a fixed position and gives the setup a more organized, OEM-style appearance. Designed for my…
remix of an existing spool holder part — I kept the original mounting/shape, but added a threaded PTFE push-fit port
these are used to keep the PTFE tubing flat and close together to minimize the are behind the printer, the 25 mm are used closet to the hub or expansion adapter. helps to maintain a gradual sweep of the tubing to remove any binding or…
my take on Drybox connector with swivel function i will include few formats.Edit for personal use if necessary. u need to print 5 parts and u need to buy 2x = PC4-M6x1 connectors. Its best to print it with 0.1 layer 4 walls 4 tops 4…
This is a filament guide 4 the ULTIMATE Spool holder wall mounts from G.design ( https://www.printables.com/model/374638-ultimate-spool-holder-wall-mounts). Not perfect but works ;) Printed with 0.2 PETG - no support needed. Just change…
Simple extrusion mounted umbilical + ptfe tube holder for the duender. Use with PUG cable strain relief https://www.printables.com/model/378567-pug-parametric-umbilical-gland
Printing from the dryer with a 4 mm PTFE tube didn't work for me - the tube sucked through the rubber plug and jammed. I made these simple plugs that push into the rubber plugs, and pneumatic fitting screws in to secure a PTFE tube. The…
An alternative version of the PTFE tube holder for the QIDI Q2 3D printer. The holder is slightly smaller in size and has a slightly larger tube opening. Three options are available: a straight one and two with a slight upward lift above…
Compact Low-Friction Filament Guide This is a compact, low-friction filament guide designed to keep your filament feeding smoothly. It helps reduce drag and unnecessary resistance. DESIGNED FOR TOP MOUNTED SPOOLS. Required hardware 3 x M4…
This is a very simple but also very useful tool to remove PTFE tubes from almost any 3D printer. If you like it, please consider rating it or commenting.
A three-part cable gland for the Space PI filament dryer, easy to remove when changing filament and tapped for an M5 quick-connect fitting. 3MF file for Creality K1C 2025 using Hyper PLA
BOM: - 2x PTFE M10 connectors - 4x M3x12 screw - 4x M3 nut Print info: - PLA (PLA should be also ok) - 0.12 mm layer height
Ideal to join two PTFE tube and obtain one extended tube. I found it useful to reach inside the enclosure, from the filament dryer. It's recommended to use 4mm push fit collar adaptors with metal teeth. If you don't have them, you can…
Printed with PLA Infil 50% plus should be stong enough Can use with original ball if using them for just a filament roll Drill the ball guide out if PTFE tube doesn't fit as it's a tight fit, 4.5mm drill bit will allow the PTFE tube to…
I couldn't find a version with the holes positioned toward the top, so I made up this version. It has a 2mm thick wall to help keep heat and fumes inside. By moving the four holes toward the upper edge of the opening, the PTFE tubes sit…
Adapter designed to connect the 6 mm PolyDryer tube to 4 mm PTFE tubes, with an internal path optimized to prevent the filament from jamming. The adapter provides a secure friction fit that holds both PTFE tubes firmly in place, yet…
If you use an internal spool holder, this PTFE tube plug is suitable for you.
Elegoo Centauri Carbon PTFE Guide holds the PTFE at the correct angle to feed filament through the filament sensor from under the spool vs over the top of the spool, as the factory designed. I made this because I am using a ball bearing…
I added a template for marking the hole, it's a lot of work, I recommend drilling with a 1.5mm drill and then using a 3mm drill, otherwise there is a risk of cracking the large central part, you need to drill around the circumference with…
I recently downloaded and made the Quick Connect . That inspired me to make the Magnetic Quick Connect . While working with those I finally got fed up with trying to man handle PTFE tubing. It's to slippery and if a fitting is snug or…
Adapter with 1 cm in height for a PTFE connector M10 size. the thread I made for the M10 PTFE connector was modelled as a M11, but it fits well.
Remixed filament guide that works with LEOTE [approach]'s K1 Max Lid Riser . Use whatever print settings work for your printer/filament combo. For the filament funnel, I do recommend turning on the inside and outside brim and setting the…
I purchased a set of “M10” ptfe fittings off amazon that ended up being M8. This is a remix of the 3.28.22 “MINI-extruder-rear-IFS” part file, now using a M8 thread. This removes the need for those brass olives. Someone else had made a…
I recently picked up the sunlu s4 4x filament dryer to use as the main dryer and feeder to the CC2, however when i set it all up the tubes were just a horrible mess So i designed this clip to manage the tubes into somthing a bit more…
These two Wrenches are intended for tightening or removing PC4-M10 PTFE Tube Connectors - with or without a PTFE Tube attached. Two versions of the Wrench are provided: 1 - The Closed Wrench is used to tighten or loosen PC4-M10 connectors…
This project allows you to convert standard cereal storage containers into practical filament dryboxes. The printed side mounts are screwed togheter through the container wall and support a Ø20 mm axle, allowing the filament spool to…
English below Ich hatte immer wieder Probleme dass sich der PTFE-Schlauch von der CFS mit der Filament Führung von der manuellen Zuführung des Creality Hi verhedderte. Ich habe eine Führungs-Platte konstruiert welches dieses Problem…
Tool to make removing the PTFE tubes on the Snapmaker U1 (or any printer with 6mm PTFE tubes) easier.
This is a spherical port similar to this one but without a threaded fastener. It is a remnant from a failed project that may be of use to someone. I was trying to develop a horizontal spooling system for the Elite Gourmet dehydrator so…
Connector for PTFE tubing with an outer diameter of 4.70 mm. Layer height 0.2 mm, no supports, RAFT as desired. Złączka do rurek PTFE o średnicy zewnętrznej 4.70. Wysokość warstwy 0.2mm, bez podpór, RAFT wg uznania.
Printed in Elegoo Rapid PETG and have worked well for a while, maybe just a bit harder to get off compared to the original but otherwise have worked well
I just cloned the model and made the second one a little taller and wider in my slicer, then exported as a single STL, haha. The original's walls were too thin to print very well with my machine. This is only the 4mm variant. I also cut…
This is a remix of the very popular MMU3 top guide. The main difference is that the top plate's lip is trimmed to allow the PC lid to drop and lift for quicker access rather than slide into the provided channel. Everything sits flush on…
I didn't like how tight the bend radius is if you try to run filament from a mostly full spool out the stock PTFE tube ports on the Sovol SH02. Print this solid or nearly solid in 90A-95A TPU. Remove the OEM threaded passthrough.…
Printed with PLA but any other material will do. Fit is good . Auto tree supports . Infill 100 bcoz it is small .
LM8UU and LM8LUU grease injector. Cap for the short version can be found on the original model. Files are now version 2: slightly looser tube thread fit made the interface between the "cap" and the injector part a bit thicker (this was a…
Just a mod to hold the referenced PTFE coupler. Pretty custom to my setup, but I was asked for the model so posting. If you can use it, great! Feel free to remix!
The AD5X partition, passing through a through-wall made of PTFE with a 45-degree rotation. Displacement of the tubes in the middle of the part. added a sleeve inside the case/ PC4-M10 pneumatic fittings are used print vertical thread
A simple friction fit adapter for joining Polymaker's PolyDryer 6 mm PTFE tube to a 4 mm tube. Material: PETG
I use Polydryer boxes and while the existing ports for PTFE are great, they aren't very stable, meaning the PTFE tube bends into some odd angles. At the same time, I'm preparing for the arrival of my MMU3, and have some tube ports for my…
![IKEA SKÅDIS PTFE Tube Holder Twist Lock Numbered [remix]](https://media.printables.com/media/prints/1210991/images/9092118_f6c76690-9ae0-4b13-a609-2cb82a2a4f4e_e2cfec0b-6583-4bc9-8155-14979512bb8e/20250228_183518jpg_compressed-photoroom.png)
![IKEA SKÅDIS PTFE Double Tube Holder Twist Lock Numbered [remix]](https://media.printables.com/media/prints/1217861/images/9140018_3f0b859a-a727-47f2-9cc1-54fc78b8ad16_c6a52c84-e2fb-4002-95f9-0a532296c02a/20250305_210901jpg_compressed-photoroom.png)
