Thicker 4mm PTFE Tube Cutter (45-degree)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little thicker so it prints easier on an FDM machine.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- BSD License
I just cloned the model and made the second one a little taller and wider in my slicer, then exported as a single STL, haha. The original's walls were too thin to print very well with my machine. This is only the 4mm variant. I also cut the 90-degree part off because it made printing it a big pain, so it's only 45 degrees, unless you just cut straight along the edge of the piece as the tube is sticking out.
I used 0.08 for layer height, random seams, and printed it on its small side as pictured.
I'm honestly not sure it's worth all the effort of printing this ^^'
