Thicker 4mm PTFE Tube Cutter (45-degree)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little thicker so it prints easier on an FDM machine.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- BSD License
I just cloned the model and made the second one a little taller and wider in my slicer, then exported as a single STL, haha. The original's walls were too thin to print very well with my machine. This is only the 4mm variant. I also cut the 90-degree part off because it made printing it a big pain, so it's only 45 degrees, unless you just cut straight along the edge of the piece as the tube is sticking out.
I used 0.08 for layer height, random seams, and printed it on its small side as pictured.
I'm honestly not sure it's worth all the effort of printing this ^^'
