PTFE Passthrough for TPU shorter version Core One
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I don't like the long filament path and I hate the side sensor, this was the solution for me.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 18
- Makes
- 0
- Views
- 713
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I added a template for marking the hole, it's a lot of work, I recommend drilling with a 1.5mm drill and then using a 3mm drill, otherwise there is a risk of cracking the large central part, you need to drill around the circumference with a 1.5mm drill and carefully break it out, then clean the circle, the DREMEL is ideal for this, it's a bit laborious and time-consuming, but you want to do it sequentially so that the movement is smooth
Here is a list of the mods in the photo if anyone is asking :)
https://www.printables.com/model/1568548-prusa-core-one-swing-arm-extension-integrated-cabl
https://www.printables.com/model/1341774-thin-magnetic-top-cover-frame-for-core-one
https://www.printables.com/model/816471-12emt-18mm-spool-holder?lang=cs
https://www.printables.com/model/852456-modular-filament-storage-system