PTFE Passthrough for TPU shorter version Core One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I don't like the long filament path and I hate the side sensor, this was the solution for me.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 713
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I added a template for marking the hole, it's a lot of work, I recommend drilling with a 1.5mm drill and then using a 3mm drill, otherwise there is a risk of cracking the large central part, you need to drill around the circumference with a 1.5mm drill and carefully break it out, then clean the circle, the DREMEL is ideal for this, it's a bit laborious and time-consuming, but you want to do it sequentially so that the movement is smooth
Here is a list of the mods in the photo if anyone is asking :)
https://www.printables.com/model/1568548-prusa-core-one-swing-arm-extension-integrated-cabl
https://www.printables.com/model/1341774-thin-magnetic-top-cover-frame-for-core-one
https://www.printables.com/model/816471-12emt-18mm-spool-holder?lang=cs
https://www.printables.com/model/852456-modular-filament-storage-system