1 / 5
Filament HUB 9 Lines - Creality Ender 3 V3 KE
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hub for custom 8-line Pico MMU. Uses ECAS04 and KW11-3Z micro switch.
- Ocena
- 4,75 / 5
- Polubienia
- 77
- Pobrania
- 137
- Wydruki
- 2
- Wyświetlenia
- 2705
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 14)Remiksy (2)Kolekcje (88)Powiązane
This hub was designed to be used in conjunction with my custom 8-line Pico MMU. The model was remixed with the referenced models using Tinkercad.
For best performance, apply petroleum jelly to the inside of the hub and the switch end cap. I also recommend gluing the ECAS04 connectors using cyanoacrylate. You may need to change the angle of the micro switch's end of travel a little to make it work correctly with different filaments.
Required parts
- 2x m3 8mm Allen screws
- 2x m3 10mm Allen screws
- 9x ECAS04 connector
- 1x KW11-3Z micro switch
- 1x Zip tie
Print settings using PLA
- Infill: 100%
- Support: Yes
- Support Type: Tree Organic
- Raft Layers: 10
Notes
- The support cannot be added on top of the HUB, otherwise you will not be able to remove the supports from the inside, in addition to damaging the HUB.
- All models are in the correct position for printing. If you have any doubts about how to print, use the attached 3MF.
