1 / 2
Easy Feet Upgrades For Creality K1 Series — image 1
1 / 2

Easy Feet Upgrades For Creality K1 Series

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These stiffening feet inserts are a great first mod, without the need for tools or experience.

Rating
5 / 5
Likes
71
Downloads
494
Makes
3
Views
2,319
Reviews
4

Updated at source:

Model information

License
Standard Digital File License

There are 4 different options: 2 simple inserts, and 2 one-piece designs that raise the printer.

The stiffening feet inserts are a great first mod, without the need for tools, experience or fancy print settings. Simply print 4 inserts and press them into the feet of the printer. It couldn't be any easier.  This will eliminate the excess slop that can cause folding / buckling. The end result is better quality prints (less VFA) and higher max accelerations (due to the input shaper not having to cut as aggressively). This can be fine tuned by changing the settings or filament. Below are the settings I used:

Orca slicer: Press Q or look for the  auto-orientation button

Creality Print: look for the auto-orientation button

VERSION

DESCRIPTION

PRINTING NOTES

V1

Simple insert

PLA, 2 walls, 15% honeycomb, no support

V2

Prevents the feet from falling off

Same as above, print upside down

V3

Complete one-piece foot which won't fall off

Use TPU, 2 walls, 15% honeycomb, support

V4

Same as V3 with less support required

Use TPU, 2 walls, 15% honeycomb, support

INPUT SHAPER BEFORE / AFTER COMPARISON (DELTA = IMPROVEMENT)

Results provided by Paperthin

Stock feet

With inserts

Delta

Max acceleration X (V1)

12000 @ 63.8 Hz

12600 @ 65.4 Hz

5%

Max acceleration Y (V1)

11300 @ 61.8 Hz

14700 @ 61.4 Hz

30%

Purcell bad stock K1 MAX

Stock feet

With inserts

Delta

Max acceleration X (V1)

5400 @ 42.8 Hz

5900 @ 44.6 Hz

9.26%

Max acceleration Y (V1)

5600 @ 43.6 Hz

5800 @ 44.2 Hz

3.57%


 

 

Tags