Counting matching models…
This is an UPDATED/redesigned 2.0 version of my insert and organizer for the board game “Wondrous Creatures". It will help organize the game and facilitate quick setup, teardown, and gameplay. It can hold everything from all the…
Dimensions are completely parametric. You can define : the filet (D) inner diameter (D) outer diameter (OD) length of the insert (L) outer diameter of the thin part of the flange (D1) outer diameter of the large part of the flange (D2)…
This model allows you to use any 1u 10 inch mounting plate as the cross member in the Labrax 10inch rack. This means a smaller printer can be used and also allows for new mounting options at both the top and bottom angled areas. Total…
I created a few simple inserts in various sizes for the Gen2 Modular Lack Drawer because there was always a mess. Now everything is perfectly organized, and the drawer space is much easier to manage.
I designed these inserts for the GEN2 Drawers - Large , which I remixed myself, because my drawers were always a mess. Now, after placing these inserts, everything has its proper place, and organization is at its best. The inserts come in…
The first iteration is a single insert for a 3" magnetic tray. The one in this set . In addition to being a great TPU stress test, the idea here is that it's way easier to pick up all the parts in the tray at once by just lifting the TPU…
I set the print height at 0.20mm for three layers of TPU. Then, stuck in place with thin double-sided tape. The idea really works with any filament, but I like TPU in this application for the cushion effect.
Molded part for Japanese precision cutting tray Printed with recycled PLA filament (rPLA) from the “Recylcing Factory”. Use glue as the corners tend to bend upwards. Formeinsatz für die japanische Präzisionsschneidlade von Dictum. Mit…
UPDATE 24.09.2024 8x3mm Magnet Variant added (not tested by me as i dont have those magnets. These magnets may be too strong for this variant) UPDATE 20.09.2024 6x3mm Magnet Variant added INTRODUCTION v2 of my Magnet Insertion Tool, with…
Some in-ground utility boxes have a large hole in the middle which could be a trip hazard. Where I work there is a ~70x150mm hole in the middle, right in the middle of the sidewalk. The safety person kept covering it with a pylon - again,…
This is an insert for Kreel Manor , the boardgame. It keeps all the components from the base game and two expansions organised. I am using Sleeve Kings (60micron) sleeves to sleeve my cards, if your sleeves are thicker, the cards may not…
Insertion puzzles allow children to develop their motor skills and orientation in the shapes of objects. Individual parts are inserted into their place in the picture. The parts fit together beautifully and simply. Can also be used as a…
This is the first model of an insert I intend to customize for small tool set organization. More versions will follow with modifications for specific hardware.
I make my models for chucks and arbors for M33, with the report at the origin. To get a UNC 1"version load this model as ‘added part' in PrusaSlicer and it will fill the M33 space like a merged-in adapter. The combination will be sliced…
Beware: this insert has couple of limitations, I mostly made it for myself, but I thought someone else might find it useful as well. All the available inserts either ditch the game board in favour of the playmat or were designed for the…
Replacement caps for Cobra Aquila taps. These little badges are used to indicate hot or cold tap. I couldn't find anywhere I could only buy them, so I made some. They are blank on top, so you can add a H or C to it. I printed them in…
I wasn't satisfied with the available model for holding dremel bits and bobs in the original CD drawers files by Chris Borge. I was gifted one of those 300pc kits that comes in an unnecesarily large plastic tote and wanted to condense my…
A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license
I redesigned hybridtracer's insert, because I wanted the whole accessory box in one piece. Before printing make sure that the big insert can fit into your original box, because I designed this for my winter edition patchwork! Category:…
I remixed other versions of inserts. The goal was to use the whole box and to store the mini expansions. I printed the big card container in 2 parts and then glued them together. Category: Games
This allows you to put custom inserts into the Walksnail Avatar Goggles L. The screws are M1 screws. In the photo, I glued the lenses of my old glasses inside with double sided tape, which works very well for me. Nevertheless, I created…
Great organizers for flamecraft designed by @olivvybee. As I need to take game sometimes to other sessions, so decided to make a lids to keep components in place. Organizers has NOT been changed, only added lids. No lid for cards storage…
Theses are threaded insert tolerance test for finding the hole size for your designs. Includes horizontal and vertical holes test for each size. Hole size is based in CNC kitchen sizing recommendations and the numbers indicate the…
Insert for the cozy game “Café Baras”, originally made by @Mister_Moody , modified to make it modular for future expansions (so no need to print the whole insert again), has an extra tray that can be used as coin bank when gaming or to…
Designed to speed setup and allow both horizontal and vertical storage. Sleeved cards are supported (I used Arcane Tinman Matte) and all 6 player boards plus rule books can be stored with minimal to no lid lift. Tokens are split into…
Insert for the retail version of Unconscious Mind, involves throwing away the vacuformed player bits one. Fits Sleeved cards based on largest size data on BGG, which are the same sleeves I have except for the research cards tested that…
With this insert you turn your Bohning’s Multi-Fletcher® Jig into a tri-liner for vanes like Spin Wings™, Kurly Vanes™, etc.... It can be used for different Vane lengths. With the centimeter marking you can achieve a exact positioning of…
Recommend splitting board in half to fit Mk3s+ (similar) print-bed otherwise okay to keep intact. Designed slide top boxes to print without supports. once completed should be a snug fit in box and should (mine does) fit with the sleeves…
This is an insert / organizer for Unconscious Mind in the Kickstarter Collector’s Edition box with all the released expansions to date (November 2024). It supports premium sleeves, vertical storage, has no lid lift, and was designed to…
Print your own extra assortment boxes for Biltema Art. 71-815 These boxes can be stacked outside the assortment box If anyone wants a 3x1 box I can make a file and they can test it. I only need the 1x1, but modelled and tested the 2x1 and…
I modified the “No fan, no bottom hex” version (only that one) to increase the diameter of the screw holes to 3.5mm and add space for threaded inserts (M3x5x4) in the bottom of the model. Print bottom down with supports (for the overhang…
Summary This 3d insert was created with several aims in mind: Fits sleeved cards - model designed around sleeve king standard sleeves No lid lift - all components fit with normal lift (Note that the box without insert doesn't sit flush)…
PRINTED SOLID Sends spools with carboard instead of plastic! They do not like to roll if you're using hanging oem spool holders from prusa. Quick little hack to get the job done! -print 2 per filament roll -Pla works just fine, print at…
Freak XL insert case. Fits four inserts. Uses eight 6X3 mm magnets to hold the lid on. Use a little bit of super glue to hold the magnets in. They should be snug, but not hard to push in. They are not meant to be friction fit. I used ABS,…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is an insert (and corresponding lid badge) to build a 100 round weatherproof ammo case out of Harbor Freight's…
Router bit insets that fits the honeycomb wall by RostaP Print with the bottom down and use a brim I printed mine in 0.20 PLA PETG should work just fine
Remixed to support sleeved cards. I also added the value of the tokens for their storage.
Printed with Bambulab P1S, PLA Basic and PLA Matte filaments. Sliced with Orcaslicer, I've been testing scarf joint feature. Adjust objects and texts (parts of the objects) colors. Disable ironing if you are uncertain if you are uncertain…
This is a partial insert for the board game Saltfjord. I used somebody else's design for three of the parts: https://www.thingiverse.com/thing:6814677 Every file has to be printed once, plus you will have to print the three files from the…
Print in place. Simple, easy, holds a lot of batteries
This is a 3d model of motor mount inserts for the 92-95 Honda Civic EG/ 93-97 Del Sol (They also work with B series swaps). These stiffen the stock motor mounts for those making more power with turbos and such. They slide into the stock…
Este gabinete de 100x50x50 mm ha sido diseñado específicamente para proyectos electrónicos que requieran una carcasa compacta, funcional y fácil de imprimir. El modelo está optimizado para impresión sin soportes al colocarlo con la base…
These are digital files for a complete insert for the Cycle 4-5 expansion of game Aeon Trespass: Odyssey. I believe this is the best insert design out there for this beast of a game. It is not only an insert, but an amazing tool to help…
Insert puzzle for children. I recommend checking before use that the puzzle has no sharp edges anywhere, otherwise clean them. The size is designed so that it can be printed on printers with a smaller printing area (180x180mm and larger)…
I made a big mistake and put my boards up, with half of them not being aligned with the other half… so had to push out a dozen or so inserts out. My thumb complained… so here's one with a little longer lever to go easier on the thumb :).…
Ford grill badge customized. Break out the old plastic logo, glue in and cover with epoxy. ( Epoxy coated pics to come later. )
I made this for a shelf I use a lot. Helps to organize smaller things and maximize space. It's for https://www.thingiverse.com/thing:2110961/makes which is an incredible shelf with no love on thingiverse
An insert for the BaBo System, created by https://www.printables.com/@Willi . This insert is designed for the BaBo Duo 60 mm drawer to store a 400 ml can of 3dlac adhesive spray. Print twice, it's mirrored. There's a bolt and a…
Festool Sander base for custom Systainer inserts. Fits the ETS-125, RTS-400, and DTS-400, all of which have the same body. Created by scanning an original Systainer insert and then modeling around it with F360 forms and surfaces. The…
Better Organize your Akro-Mils 10144 44-Drawer Storage Cabinet. Allows you to have more parts in the Bin.…
The ball vice I made results from remixing three models: Open Ball V1 (Ball vise system) , D-Series Ball Vise and D-series Dovetail Vises . Credit goes to Chris Borge for the original designs, Chris Deeter for his very helpful Build Guide…
The ball vice I made results from remixing three models: Open Ball V1 (Ball vise system) , D-Series Ball Vise and D-series Dovetail Vises . Credit goes to Chris Borge for the original designs, Chris Deeter for his very helpful Build Guide…
Parts needed: A Heltec LoRa 32 V3 board 2x M3x14 bolts 2x M3 nuts
Insert for 10Pc Henckel knife block in order to prevent / cover up the top finish of the block flaking off around the scissors cutout.
An insert that fits neatly into the main box of Cthulhu: Death May Die - Fear of the Unknown and holds all the cards and tokens. There is some room left for extra cards. It fits the relics, insanities and mythos cards sleeved (I use…
Motivation I wasn't entirely satisfied with the fit of this one by crashoverride after being printed in Grey Pro & I think Durable resin on a Form 3 – it would fall out maybe 1 of 30 rides OEM parts cost money Rev 1 was a modification of…
Insert for Pilgrim board game. Print all parts at .2mm layer height, 3 walls, 10% infil (I used gyroid). I used PLA for this print. You can paint the text for nicer looking inserts, and print the boxes in various colors as well.…
If you want, you can help me with designing inserts by donating here: https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8 or joining my club here: https://www.printables.com/@Sortirus_659392#join.@Sortirus_659392.1094 Hello, for…
Credit for the teleprompter goes to KatzCreates: https://www.printables.com/model/90999-camera-lens-mounted-teleprompter
English description (deutsch darunter) The insert consists of many practical parts to store all the game material. It also helps with setting up the game and speeds up dismantling. All expansions and promos released up to 2024 fit inside,…
Witajcie! Prezentuję wkład do systainera T-LOC Mini który pomieści moje ulubione narzędzia 3/8 firmy Wera. Zresztą co tu dużo pisać, wszystko widać na zdjęciach. Pozdrawiam!
This is replacement for the ashtray in a 1969 Volkswagen Bus. It probably will work on 1968 and later models but no guarantee. I've included the .stp file if you wish to modify it for your own needs. Prints in 2 pieces for easier…
This is a flush insert adaptor for the Magpul Type 1 QD socket: https://magpul.com/sling-mount-kit-type-1.html?mp_global_color=118 This design should work for any hollow core stock, if you have access to the inside. For reference, I am…
This is a collection of inserts for my EDDC boxes. Regarding your needs you can fit the right insert to sort and organize your dice or miniatures and keep them protected. Plus a template to cut liners for the inside of the box. Find the…
I designed this insert for the english / french edition from “Sorry We are French”. The internal dimensions of the game box is 292x292x83mm. This insert allows for quick set-up and vertical storage of the game, and supports premium…
Zero Clearance Insert for Harbor Freight Hercules 10" Table Saw This is a zero clearance insert for the Harbor Freight Hercules 10 inch table saw. You will need to cut the blade slot for the table saw first until the riving knife begins…
Error 17536 relates to an issue with the Dwarf Board connector and the original design of the cable strain relief. The strain on the connector can cause the extruder motor to stop spinning and until a recent beta firmware (6.2-RC1) the…
This is a simple heart-shaped box that holds the primary game tokens (paint, lamp, wall hanging, and curio) for the game Décorum . This fits the version of the game that has a vaccuum molded insert with two heart-shaped storage areas.…
Variety of lengths: Rotated Insert Hook 17mm Rotated Insert Hook 25mm Rotated Insert Hook 30mm Rotated Insert Hook 35mm Rotated Insert Hook 40mm STEP files included for remix support not needed if print orientation like in the picture.…
STEP files included for remix support not needed if print orientation like in the picture. Please share your makes Have fun :)
Guides added to make it insertable for another project. Print on flat surface.
Summary: These are custom inserts for the Pinecil rugged case. I remixed some models from other users to better fit my needs. Hardware Notes: The brass and wet sponge cover will require M2 screws and the respective heat set inserts to…
I made 3 upgrades for the Heat insert press, which is great by itself and I recommend it. I really like it. I have printed all on Prusa MK4S or XL with 0.4mm nozzle using 0.20mm layer height. As material goes, you can use anything you…
Just a quick print to add a shaker lid to the larger glass ground pepper containers you can buy at Sam's Club. The container lid still fits as well. The shaker lid friction fits with a little pressure. Happy cooking!
Insert pour Eandeavor Eaux Profondes pour rangement sur le côté. Je me suis basé sur le modèle Deluxe pour faire les boîtes de joueurs. J'ai fait un insert pour les tuiles 1000 à 4000m et plus. qui contient aussi le carnet de score, les…
I used the user trays from this design (https://www.printables.com/model/530151-creature-comforts-board-game-storage-trays-for-woo) and took inspiration for the rest of the insert, but I designed all the trays myself. The resource trays…
Powerbox Systems offers a softbag for their Core/Atom radio transmitters. The softbag has a foam insert with a number of recesses in which smaller accessories can be stored. The inserts provided here fit exactly into these recesses and…
This is meant to replace the third layer of the original L-shaped insert of the miniature version. The original one doesn't house the acrylic tiles, also with the bags filled it's very cramped. The vineyard tiles fit (bagged up) in the…
I've created models for an insert/organizer for the card game Scout , partly inspired by others I've seen. Version 3.x works well, unless you have sleeves on the cards. Version 5.x works fine, especially if you sleeved your cards. It is a…
🎁 Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my referral code TODD11893313 when 🛒 ordering a Rivian . Updates Feb 19, 2026 Added new medium size to match new cup size. Cup Holder Inserts These are solid…
In the remix part of this models, I took the original designs and separated the buildings individually. When you print, feel free to choose your distribution of short/tall buildings. RED: 4 copies of Building 2x2 8 copies of Building 1x2…
A compact (1u x 3u x 3u [X Y Z]), stackable Gridfinity bin for your Pinecil and Heat Set Insert tips. Heat insert tool holes have labels which can be printed in a contrasting color for higher visibility. The tip bin can hold up to four…
My family enjoys the Queen Games polyomino board game, Helsinki, with and without the expansion. Unfortunately, the retail version has no real storage solution other than the box and zip lock bags. Therefore, I made this storage solution.…
This was originally created for the Photo Case . This insert is suited to fit a full deck of cards along with the additional cards required to play the ‘Chicago’ variant of Cribbage. This print works just fine with a 10% infill. Any…
Base to build custom fittings from it. Both stl and step available to make it easies to edit and customise.
can can put inserts into doors from the inside, especially if you messed up bridging and dont want to reprint doors again. :) Mercenary landy kit is on Cults
This in my first print for baby activity board. It lets them connect color, shape and it snaps in place thanks to magnet. Make sure you glue down the magnets (6x2mm) so they cannot detach. Just use regular wood screws to attach it to…
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover. The design includes ventilation slots for heat dissipation and mounting…
Faraway board game insert for the chinese version from AliExpress which is smaller. Works with sleeved cards.
A table ready board game insert to allow for fast and easy setup of the game. Compatible with the base game and the folowing expansions: Discovery Foundations Crisis Expansion Player’s have pots for their individual components required to…
A table ready board game insert to allow for fast and easy setup of the game. Designed for the regular base game and Anglers Cove expansion Player’s have pots for their individual components required to start a new game. Walls have been…
Insert pro hru Karak - 2. vydání (čtvercová krabice). Tato verze insertu pojme originální věž na dlaždice, 16 kusů mřížek a veškerá vydaná rozšíření. Rozměr insertu je 296 x 296 x 67 mm - insert nepasuje pro verzi KOSMOS! Mé inserty mají…
Krabice je podstatně větší než je potřeba, proto je součástí několik velmi jednoduchých objektů, které slouží hlavně jako výplň, aby se zbytek věcí v krabici nerozsypal (viz obrázky). Jak a co vytisknout: 4x…
This allows for the rugged box to hold 3mL peptide vials or 10mL (22mm) vials.
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
![Kreel Manor (+2 expansions) boardgame insert [sleeved cards]](https://media.printables.com/media/prints/1030542/images/7821235_276faf54-0f70-45a0-984a-75633e132b54_ec463192-62a6-4ea7-b8a3-f94d8b21f21f/km1.jpg)
