Left Handed Insert for Olfa H-1 Cutter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is for Left Handed folks. It allows the blade in the Olfa H-1 to be flipped so the knob is not against the palm.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 41
- Makes
- 0
- Views
- 428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Being a southpaw, I always have to work around tools being made for the right-handed world. This is my work-around. This part allows the razor blade in the Olfa H-1 to be flipped upside-down so the knob is placed outside the hand rather than against the palm when held in the left hand.
It is designed and tested on the H-1 but may work on the NH-1 and XH-1. Please let me know if it does or does not work with these other knives.
Print with PET or ABS, 0.2mm layer height, 0.4mm nozzle, 50% infill
After printing, insert 2 M4 nuts into the back of the part. Swap the spring steel clip from the factory insert to this one and reassemble your knife.