Left Handed Insert for Olfa H-1 Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for Left Handed folks. It allows the blade in the Olfa H-1 to be flipped so the knob is not against the palm.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Being a southpaw, I always have to work around tools being made for the right-handed world. This is my work-around. This part allows the razor blade in the Olfa H-1 to be flipped upside-down so the knob is placed outside the hand rather than against the palm when held in the left hand.
It is designed and tested on the H-1 but may work on the NH-1 and XH-1. Please let me know if it does or does not work with these other knives.
Print with PET or ABS, 0.2mm layer height, 0.4mm nozzle, 50% infill
After printing, insert 2 M4 nuts into the back of the part. Swap the spring steel clip from the factory insert to this one and reassemble your knife.