Altoid Yahtzee insert/inlay
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.60 – €1.95 net (excluding VAT)
For file: Altoid Yahtzee v6_0.4n_0.2mm_PLA_MK4IS_1h30m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.78 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 1.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Turn an old Altoid tin box to a portable Yatzee case with room for five dice and a small pen (e.g. a Zebra Compact F301)
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 104
- Makes
- 1
- Views
- 762
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Turn an old Altoid tin box to a portable Yatzee case with room for five dice, a small pen and a folded sheet of paper.
It is modeled to fit 16 mm dice and a 98 mm long Zebra Compact F301 pen (with a diameter of 10 mm).
It is a snug fit, so in order for it to fit despite the thickness of the folded lip on the edge of the tin box, I have made the insert into two parts. No glue is needed. It should snap in place.
There is a thin wall (between dice one and two in the image) that you can just break off in case these two dice are too tight.