Home Depot Rotten Pumpkins LED Puck Adaptor Insert
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.44 – €2.98 net (excluding VAT)
For file: HD Blowmold Pixel Puck Adaptor 25mmH 2022_0.3mm_PLA_MK3S_2h16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.71 excluding VAT (range midpoint).
- Weight reported by the author
- 43 g
- Print time reported by the author
- 2.27 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is an LED Puck adaptor or insert to be used with Home Depot's Rotten Pumpkin Patch Blown-mold Pumpkins.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 49
- Makes
- 0
- Views
- 936
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial
This adaptor or insert is meant to be used with Home Depot's Halloween Rotten Pumpkin Patch collection. The adaptor will allow you to swap out the internal components for an addressable led puck light (similar to this). Now you can make your pumpkins even more spooky in your light shows!
The design is meant to allow both the female and male pigtails to slide through easily, including the large hex. This way no splicing is needed on the pigtails. Reference the images to see how the puck is inserted into the adaptor.
There are several different models.
25mmH means that the adaptor has a 25mm height.
50mmH means that the adaptor has a 50mm height.
The year denotes the proper spacing needed for the screw ears to line up into the blow-mold.
See the images for the tested HomeDepot Pumpkins that this design works in.
Print Settings:
.30mm
25% infill
3 Perimeters
Organic Supports
PLA or PETG is fine