Lötkolbenhalter für Einschmelz-Gewindeeinsätze/ Soldering Iron Holder for Melt-In Thread Inserts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Werkzeug zum Einspannen eines Lötkolbens der zum Einschmelzen von Gewindeeinsätzen benutzt wird.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 218
- Makes
- 0
- Views
- 2,297
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Siehe auch dieses Modell
Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden.
- Es ist kein Support zum Druck nötig.
- Bei dem Spanner darauf achten, wo der Gewindeeinsatz eingeschmolzen wird (siehe Bilder).
- Das Profil geht nur in einer Position in den Winkel, da eine Ecke stärker abgeflacht ist.
- Die Aufnahme des Lötkolben ist 20,6mm, so das (wahrscheinlich) auch ähnliche Lötkolben benutzt werden können.
- Der Knopf wird mit Sekundenkleber auf eine der Schrauben M3x12 geklebt. Damit kann der Schlitten ohne Werkzeug fixiert werden.
- Der Griff kann links oder rechts befestigt und werden.
Das benötigt man auch:
4 Stück Zylinderkopfschraube M3 x 8
6 Stück Zylinderkopfschraube M3 x 12
1 Stück Gewindestift M3 x 12
12 Stück Einschmelz-Gewindeeinsatz M3
4 Stück Holzschraube 3,5 x 20
1 Stück Holzplatte ca. 200x250mm; 16mm dick
1 Stück Lötkolben (Durchmesser zum Klemmen 20,1 - 20,5 mm; z.B. https://www.amazon.de/dp/B09LHGYVJR/ref=cm_sw_r_apa_i_1CZFJD6TTGBPDSC1T2JG_0?_encoding=UTF8&psc=1)
Translation DeepL
See also this model
This is a tool for clamping a soldering iron. This allows fused-in thread inserts to be mounted into components at right angles.
No support is required for printing.
With the clamp, pay attention to where the thread insert is melted in (see pictures).
The profile goes into the angle only in one position, because one corner is more flattened.
The soldering iron mount is 20.6mm, so (probably) similar soldering irons can be used.
The knob is glued to one of the M3x12 screws with super glue. With this the slide can be fixed without tools.
The handle can be fixed left or right and.
You also need:
4 pieces cylinder head screw M3 x 8
6 pieces cylinder head screw M3 x 12
1 piece set screw M3 x 12
12 pieces fused thread insert M3
4 pieces wood screw 3,5 x 20
1 piece wooden plate approx. 200x250mm; 16mm thick
1 piece soldering iron (diameter for clamping 20,1 - 20,5 mm; e.g. https://www.amazon.de/dp/B09LHGYVJR/ref=cm_sw_r_apa_i_1CZFJD6TTGBPDSC1T2JG_0?_encoding=UTF8&psc=1)