Counting matching models…
I liked the design by @AHPrusai3MK3SKit but sadly discovered that it doesn't fit the MK4S frame, so after a very quick tweak in Tinkercad we get this. Print settings:- PLA 0.2mm Generated support material with auto generated supports…
Flashforge Adventurer 5M Pro – Toolholder This print in place toolholder allows you to store your standard tools neatly on the side of your Flashforge Adventurer 5M Pro. No glue is needed: everything just clicks together permanently. Fits…
I printed this little holder for my 3D printer tools. It attaches to IKEA furniture. You can also make the holder bigger. I printed it with PETG and 20% infill to make it stable.
The original Toolholder requires quite a bit of support to print, and it leaves a rough suface on some larger areas. Since the part doesn't see too heavy loads the print orientation shouldnt matter that much. Print the two parts and…
Another design for my ikea furniture with the 3d printer on it. I added the honeycomb structure.
Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Быстросменный резцедержатель, AXA QCTP 250-111 250-101 for WM210.…
Tool holder adaptor for the EZ Load MMU3 Buffer. You might need supports and brim, depending on your printer. A layer height of 50% nozzle diameter should work.
A thing to put parts into like screws and also hold tools like screwdrivers and pencils
Printing settings: Material - PETG/ABS Nozzle - 0.4 mm Layer height - 0.2 mm Top, bottom wall, side walls - 3 mm Infill - 15% Print speed - 100 mm/s Print Settings Rafts: Yes Supports: No
To save myself from actually measuring the dimensions of the P1 mystery hole, I leveraged just joo' s design. I wanted to hold some specific tools, and I wanted to add some bracing to reduce the deflection of the tool-holdy part. I used…
I created a little toolholder for my drills and couple other stuff I need for work. It's suitable for drills with a diameter of 2.5mm, grinding wheels with a diameter of 39mm and 22mm, rubber wheels with a diameter of 21mm, rubber rods…
EN: Have had previously uploaded a creation that had somehow gone in the wrong direction, more for fun, to see if someone could make something a little more useful out of it. Now I did it myself and turned the project, originally intended…
Just another toolholder. I designed it for my Platsa enclosure and its possible to use without screws. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0,3 Infill: 10% Filament: Prusa PETG PETG…
Made a wallmounted toolholder for the Wera Kraftform kompakt VDE big pack 1 set for one of our sideshops at work. Printed on a Creality CR-M4 in grey PLA. Walls: 5 Infill: 15% Infill pattern: Gyroid I printed it with supports for the…
Hello to my project. This is a small add-on for my IKEA Ender 3 enclosure. I wanted to store my tools convenient enough that they're not always lying around but also are pretty close, that I can get them in seconds. So I designed a very…
This is a Tool Holder I made for the tools that came with the Prusa Kit. I added a few slots so that I could put in a second cutter and a scraper. This Thing is not perfect but its does it Job. I would love to here your feedback!! Print…
DO NOT USE, THE SCALING IS FAULTY This is a holder for the tools that came with the SV08. I know that there are already versions out there, but I wanted a Gridfinity one and decided that I could design it. WARNING — AT THE CURRENT TIME, I…
Inspired by other toolholders for the Prusa XL tools, I designed my own that also works with the Original Prusa Enclosure. There is also space for a glue stick (Not in the photos as someone has taken it and has not yet put it back :-) and…
I liked the design by @AHPrusai3MK3SKit but sadly discovered that it doesn't fit the MK4S frame, so after a very quick tweak in Tinkercad we get this. Print settings:- PLA 0.2mm Generated support material with auto generated supports…
mistakenly I uploaded the printhead side base as door, corrected now. see the updated STL's This holder ist exactly fitting to the original Printhead. A Pen can easly attached as penwriter for the SV08. The holder falls by its own weight,…
This holds pretty much everything that came with the Prusa XL. Included the scad file that remixes it. To run the scad (and make your own mods) you will need the original STL and the tweezer bracket pressfit STL, so I included the latter.
This is V2 of the “linkable tool holders” that I have published previously. The updated version will attach to the Festool MFT-3 using a remixed shorter version of the Festool MFT-3 nut in the same principle as the original Festool…
Toolholder for the original prusa enclosure. Remixed to use heat set inserts for mounting.
Hey Ihr saugwütigen Ordnungsliebhaber ;) Hier ein weitgeres Tool um Euer Zuhause upzugraden… Entwickelt habe ich die Wandhalterung für die Saugaufsätze des Philips Power Cyclone 12 der 8000er Serie. Möglicherweise passt sie jedoch auch…
for all the people that still proudly use an mk2s printer and don't have money to upgrade, a slim and compact toolholder for just the essential tools.
This toolholder can be fixed to the rail of the MFT workbench using the standard MFT nuts and M5 nuts and bolts. The two outer parts are fixed on the rail, the middle part is movable and can be brought into three positions: horizontal,…
Model This is a toolholder for the Z-beam of the Prusa Mini, but can be used on any 3030 Profile. Works great for me. Printing instructions This is a small part, so make sure your bed is clean. The part is optimised for the following…
Toolholder for Toolholder for Parkside Torx Wrenches. You can choose the color of the letters in prusaslicer. This is made from PLA and seems to be tough enough.
Toolholder for Toolholder for Parkside Hex Wrenches. You can choose the color of the letters in prusaslicer. This is made from PLA and seems to be tough enough.
Two Toolholders For the Files I use on my Bench. Printed in 0,3mm PETG
None of the available versions satisfied me, so I designed my own toolholder. Has space for all the included tools (2 nozzle assemblies, the side cutter, the alan keys, the screwdriver and the nozzle unclogger), a cheap deburring tool…
A toolholder that securely locks into place on a Gladiator-style toolbox.
Toolholder for creality ender3 v3 se with side scraper holder.
UPDATE 2025-03-19: Korrektur der Abmaße für Gridfinity. Danke an dieser Stelle an Nomaad @nomaadpdx_2365639 dem der Fehler aufgefallen ist. Und Entschuldigung an die die bereits die Falschen Daten genutzt hatten. There was an error in the…
Simple magnetic poop bucket for BambuLab P1S and X1C. It two versions, one simple bucket and one which includes a magnetic toolholder for two tools. Requires 4 or 6 (for stronger fit), and 2 additional magnets for the toolholder. The…
2 toolholders for the Original Prusa Enclosure. The bottom toolholder holds (see picture); 2 nextruder nozzles wrench nozzle removal tool knife brass brush spatula deburring tool tweezers The top toolholder holds (see picture); a few…
Habs in ABS gedruckt mit 0,20 Standard Einstellungen
Print using 4 walls, 25% infill and supports for optimal strength for the dovetails. Magnets holes are for magnets sized diameter 8mm x 4mm. If you would like a version using smaller magnets let me know
If you want a single part to hold all your different screwdrivers, this is for you! This part can hold screwdrivers with a diameter from 1mm up to 8mm or more. It also works for files. To put your tool onto the wall, just use your tool to…
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…
Aquascaping Tool Holder (Cabinet-Mounted) Keep your aquascaping tools organized and easily accessible with this cabinet-mounted tool holder. Large Tool Holder : 27,5 cm long - Made for 6 Tools like scissors and tweezers plus hardscape…
Works with: Reciprocating saw TE-AP 18Li and similar Jigsaw TC-JS 18Li and similar Multitool Varrito and similar Angle grinder TC-AG 18/115Li and similar Concrete hammer TE-HD 18Li and similar Suggestions for improvement are welcome
Non stackable 4x2 Gridfinity toolholder for Hazet ratchet and bitholder with additional space for small stuff.
A tool holder designed to have all our utilities that are used daily in our 3d printer. It is designed in principle for the Anet E10, since it is long enough to avoid the X-axis tensioner (improvement), but it can be used in any other 3d…
Toolholder for Multifix AS for HBM 25 x 550 Lathe. Clips on the Splash Guard of ther Lathe
Storage for the original Emco Maximat Super 11 Toolholders.
The Gardena 18600 15m auto retractable hose has only 2 slots to put tools in. This version has 9
Remix des Modells von Bunsenbrenner14 als zweiteilige Ausführung um den Druck zu vereinfachen und auf Stützmaterial verzichten zu können. Teile werden mittel Schwalbenschwanz Verbindung positioniert und verklebt. A remix of the model from…
Toolholder PRUSA XL - Honeycomb & hanger | REMIX Added a Honeycomb pattern & the hanger remix ! The remix is about 5 mm wider, also the edges are rounded a bit! (The grey one is the original.)
With this universal tool holder you can store three tools next to each other. It's build for leathercraft tools. The tools have different diameter stems, but with the different sized tubes you can store them next to each other. The base…
Toolholder for the Accessoires for Scheppach OSM100 oscillating Spindlesander.
Holder for the tools and accessories for Recoord Power 300E Bandsaw.
Toolholder that snaps on to an Ikea SKADIS board. Holds most used tools for a Prusa Core One. Printed in PETG, but PLA should also work fine. Pegs have 100% infill so they do not snap off.
Remixed Toolholder for Thermomix TM6 - 2 Parts no Support better shape for whisk holes for zipties prevents falling tool holder
Pressed for space, I made this tool-holder to get these tools out of a closet. The tools shown all came in individual cardboard boxes, which took up valuable space. This works for lighter tools. I think circular saws, etc., will probably…
This toolholder holds all the tools that come with the Centauri Carbon, and a lot more. Has space for a full standard set off allen keys, screwdrivers, the elegoo scraper, a creality scraper, a leatherman multitool, usb stick, calipers, a…
Flashforge Adventurer 5M Pro – Toolholder This print in place toolholder allows you to store your standard tools neatly on the side of your Flashforge Adventurer 5M Pro. No glue is needed: everything just clicks together permanently. Fits…
Protection for metal bandsaw from Wiltec. Alos acts as a toolholder. The bumper is made from a piece of rubber. Fits for this model - LINK
Different tools mean different requirements, therefore i made my own tool holder for HWS in Autodesk Fusion 360. Could be improved, but works for me. 2 Part, which have to be glued together (i don't want to print supports all around). For…
I printed this little holder for my 3D printer tools. It attaches to IKEA furniture. You can also make the holder bigger. I printed it with PETG and 20% infill to make it stable.
The original Toolholder requires quite a bit of support to print, and it leaves a rough suface on some larger areas. Since the part doesn't see too heavy loads the print orientation shouldnt matter that much. Print the two parts and…
Another design for my ikea furniture with the 3d printer on it. I added the honeycomb structure.
Baseplate toolholder mini lathe, simple toolholder for minilathe tools. Loose fit - angle 45 degrees not 60. Use slicer for sizechange, bigger/smaller. Printed with AddNorth HT-PLA, infill 90%. Modify as you like.
Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Быстросменный резцедержатель, AXA QCTP 250-111 250-101 for WM210.…
Simple toolholder for FlashForge 5M screws in with allen keys on top left. Generic print settings and around an 1 hour print time on the 5M.
I decided to make a toolholder that simply clicks on the frame and rests on the power unit. It holds all the tools that comes with the printer kit! I also added room for a key that I use for nozzle changes. so there's room for 4 alan keys…
Tool holder adaptor for the EZ Load MMU3 Buffer. You might need supports and brim, depending on your printer. A layer height of 50% nozzle diameter should work.
Ryobi 18V Tool Holder – Lindvig Pro Edition A heavy-duty, professionally engineered remix of the Ryobi 18V mount. Standard mounts often cause bulky tools (saws, vacuums, or large drills) to collide with the mounting surface. The Lindvig…
Hello, This a prototype for a Toolholder on the Elegoo Neptune 4. It is not perfect, but it works. Have fun!!
A thing to put parts into like screws and also hold tools like screwdrivers and pencils
A two piece tool-holder for mostly all tools needed at your 3d printer. indicating caliper needle files hexagon socket wrench SD-cards drilling bits I added a smaller test-part so everyone can test in small if the own tools fits into the…
A toolholder fixture designed specifically for ISO 20 / SK20 spindles with ER11 or ER16 collets. Standard collet key blocks (such as the Haas CT40 version) do not fit ISO 20 / SK20 toolholders — these lack the groove that larger…
Toolholder for a self-made 53mm diameter boring head and brazed boringbars.
Simple tool to assist with consistently installing the 3x8mm magnets into the INDX toolholders. Requires: M3x8 SHCS x2 Thread the M3x8 SHCS into the top half of the tool. Make sure the 3x8mm magnets are oriented correctly (use an INDX…
Toolholder for Boringhead F1-12 with 50mm diameter and boringbars.
This is a simple to print (use supports and print upside down) and mount addon for your Pro's kit SS-331. Just use a bit of double sided tape to attach it to the top of the station. Finally, you have a place to safely store the extra…
Just my version of a simple tool holder, that fits the MK3. It can hold most tools as provided with the Prusa i3 MK3 kit and some more like a spatula and two pliers
Holder for multifix size A holders of a Latche Mount on the wall and slide the multifix over it. PET-G ore PLA works great
Bigger version of the Tiny Toolholder for Prusa Mini. Snaps into place on top. Shouldn't interfere with the z-axis cables, but be careful. Should fit a bunch more of your “always needed” stuff, like pliers and glue or whatever.
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…
Yet another remix for a toolholder for pliers on top of Z.
