1 / 4
Prusa Mk3S Toolholder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I decided to make a toolholder that simply clicks on the frame and rests on the power unit.
- Rating
- 4.675 / 5
- Likes
- 295
- Downloads
- 1,795
- Makes
- 15
- Views
- 9,875
- Reviews
- 40
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I decided to make a toolholder that simply clicks on the frame and rests on the power unit.
It holds all the tools that comes with the printer kit! I also added room for a key that I use for nozzle changes.
so there's room for
- 4 alan keys
- 1 set of pliers ( from the kit)
- 1 small screwdriver (from the kit)
- 1 spanner/wrench (from the kit)
- 1 set of tweezers
Print instructions
My version was printed on a Prusa Mk3S with standard settings
0.30mm DRAFT LK3 - Prusament PLA
No supports needed
Infill at 20%
No brim
first layer height 0.2
perimeter 2
solid layers 4 top / 3 bottom
grid infill