1 / 5
Holder for Prusa Enclosure for waste bin or toolholder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
for toolholder or bin or anything else. I use for tools and filament waste bin.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 55
- Makes
- 1
- Views
- 501
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
to fix on bottom profile (left or right) by screw.
you need:
- M3x8 screw (1)
- M3nS nut (1)
The toolholder bottom is neutral (same for left and right) and can be used for different elements, like the toolholder and the waste bin.
The printed connection bolts to hold are 6mm thick, 40mm appart and 10mm high. The top part holes must be 6.2 to 6.4mm in diameter.