250-000 / MXA toolholder storage bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount bracket for storing 250-000 or Aloris MXA size lathe toolholders
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 49
- Makes
- 1
- Views
- 292
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple wall mounting bracket for storing Chinese 250-000 series lathe toolholders (such as https://www.arceurotrade.co.uk/Catalogue/Machines-Accessories/Lathe-Accessories/Tool-Posts/Model-000-Quick-Change-Tool-Post-Set ) I believe these are the same size as the Aloris MXA series, so it should work with those too.
The bracket is deliberately a loose fit on the toolholder so you don't have to fight the tools on and off, and to make sure an errant chip won't jam everything up!
Edit: I was contacted by another user who found the fit on the Aloris MXA to be too loose. you can find their remixed version here: https://www.printables.com/model/406634-aloris-mxa-t-slot-cleat
Works fine in PLA with fairly low infill, although you might want to locally increase the infill percentage around the screw holes with a modifier if you're going to use power tools to install the bracket!