Counting matching models…
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
Print approx. €2.47–€3.01 excl. taxPreliminary estimate for one variant
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
This is a combination tool to help disconnect the PTFE tube and the AMS cable. I had seen some small separate versions, I wanted to make a combined tool that I can hang from my wire shelving unit. There are also holes to hang from a peg.…
A full-sized robust stool that can be disassembled into a small box so you can store it in a cabinet. For unexpected additional guest. Normal folding chairs always fold into a slightly less inconvenient and ugly shape. This design even…
Designed to help with soldering for the TRRS 3.5mm jack motherboard. Made to help with build a Variable Openmod Part 3. This is a tool to help soldering 3 wires into one for ground. And a tool to help hold wires when soldering into a TRRS…
This tool has a cube at one end for grouting inside corners, and a sphere at the other end for applying caulking/sealant/silicone. Design features Two-in-one tool saves space on your hard disk. Different sizes available. Printing…
I needed something to keep me from losing my toolbox key in my truck, what better than a mini tool box??
UPDATE 24.09.2024 8x3mm Magnet Variant added (not tested by me as i dont have those magnets. These magnets may be too strong for this variant) UPDATE 20.09.2024 6x3mm Magnet Variant added INTRODUCTION v2 of my Magnet Insertion Tool, with…
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
6 Part Gridfinity baseplates for the Husky Tool Storage 27 in. W 5-Drawer Gloss Black Rolling Tool Cabinet . UPDATE: Tweaked and added Tolerances section, as well as OpenSCAD file. Drawer Dimensions: 585 mm x 381mm . Tolerances: There…
You can buy this model printed in PETG along with the needed gaskets so you don't have to buy a 50 pack, message me! Disconnects the Heater Hose Fittings on 2012-2018 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L Eco Boost. This video…
Parktool Press Fit BBT-90.3 Component 2x M16 nut 200mm M16 threaded rod
Materiál: PLA Výška vrstvy: 0,2 mm Orientace: libovolná Podpora: žádná Výplň: 15 % trojůhelník
In my opinion the original bracket is too thin and I didn't feel comfortable with it. So I opened it in Fusion and made it thicker. The Orbitool 2 toolhead board still fits, only the “outside” is edited. I used these settings and printed…
My icing modelling tools were a mess before I made this. Now I can see all of my tools in my Gridfinity baking drawer, and this stacks too so I can keep multiple layers of modelling tools in a small space! As seen in this video:
Three knurls to choose from. The spiky one is part torture device, watch out! Cats seem to like it too!
Based on the original design to suit the orbital sander. It supports the weight nicely and keeps clear of the tool's shape including the dust extractor. Uses the original counter sunk screw mounting but at a different depth. Recommend a…
Adjustable peg for holding Ankermake toolkit on a SKADIS organizer, providing some flexibility on spacing. Recommend using two, though it will both fit and balance in one. Built from @PinkOrange09_1527050 ‘s AnkerMake Tool Kit Holder and…
This is an adapter for attaching Festool 36mm hose to a “standard” 2 ½" dust collection port. I designed it for using Festool dust collector with D36 hose with my my table saw, router table, planer, jointer, bandsaw, etc. I was using…
I wasn't satisfied with the available model for holding dremel bits and bobs in the original CD drawers files by Chris Borge. I was gifted one of those 300pc kits that comes in an unnecesarily large plastic tote and wanted to condense my…
This is a tool board protective base with a fan mount for cooling the Orbitool tool board mounted to a Orbiter2 extruder. I remixed it to support a 4010 fan and the umbilical cable. Printed in ASA 5 walls, bottom and top. Orca 2.2.0 If…
Bucket for the side, is inserted into the existing holes, works with enclosure
I liked the design by @AHPrusai3MK3SKit but sadly discovered that it doesn't fit the MK4S frame, so after a very quick tweak in Tinkercad we get this. Print settings:- PLA 0.2mm Generated support material with auto generated supports…
Wanted a stand for the hex set from teng. The set has 2.5mm to 8 mm – but I also have separate 2, 10 and 12mm wrenches. The first version has a slightly loose tolerence on the joints between parts - so I uploaded a second copy with a…
English: This model allows you to create a stunning quilted effect for cake decorations, similar to the design featured in high-end wedding or celebration cakes. The pattern replicates a diamond-tufted texture, with each diamond measuring…
Cap for one of Amazons most sold deburring tools: the full metal version from Vastools. Protect yourself and other items from damage by the sharp knive of the deburring tool Very simple model, but with a very nice hold on the tool.
Inspired by the Steve Tool by Graber's Pottery. None of the files here will reproduce exactly what the Steve Tool will do - their wheels are much sharper. I wanted different attachments and alternative handle options. If you have any…
Unlike other designs it does not integrate dovetail mounting and therefore is completely generic, working in any form of tool post from quick change to standard. May limit the size of stock that can be trammed in on mini lathes due to…
This model was designed for these tools: deburring tool , hobby knife . The design of these tools is fairly ubiquitous, but please measure your own tools before printing as they might not fit. Pictured is an older revision of the ⅓ height…
I made myself a simple box for my tools. Separate compartment for scraper. The wall allows you to attach a knife or measuring tape. Simple model => simple print I use 100% scale 80x80x80mm Black PETG 0.2mm weight 3 wall 3 top 3 bottom 90%…
Trying to replace a faucet in a bathroom, and I couldn't get an angle on those stupid plastic bolts underneath, and of course didn't have the right tool or even know what it was. Designed this to remove those plastic bolts. Designed to…
If you like my work consider supporting me on boosty , thank you.
Created language set for Czech and English. You can print the sliders with engraved text with manual color change at least at 1.7mm. Or use combination of sliders and infill for multicolor print. Attached pre-prepared gcodes for single…
Just a nice print if you dont wanna spend 21$ on the metal one. This is the same size and verified working on my m7 it has a indent for a 4mm magnet to hold it on mainshaft. I printed mine @ 0.16, nothing to post process.
Blocking air from the auxiliary cooling fan and adding outlet on the front. To prevent nozzle clogging when using the auxilary part cooling fan. Print at least in PETG. ABS or ASA is recommended. You'll also need some round magnets…
Made for Mustool MT11 Pro, with lead holders on the sides. I designed it with the silicone case on, so if you don't use yours, it will be sightly loose. Printed with PLA, 0,2 mm layer height, placed on the 45 degree face.
Qidi Plus 4 Tool head with small triangles were added to the front cover for air flow, cosmetic looks. Triangles look small, however I tested this cover printing for several hours with no overheating. Please leave a “Like”, it helps me,…
Based on my original blank faced model sent to me from Qidi. This Qidi Plus 4 Tool head with all air holes except for the face where there are different air options. You will need (2) 4x1.5mm round magnets available: here Glue to install…
Based on my original blank faced model sent to me from Qidi. This Qidi Plus 4 Tool head with all air holes closed except for the Full face where there are different air options. I use this tool head currently. You will need (2) 4x1.5mm…
Util ergonomico para coger bolsas - Ergonomic tool for picking up shopping bags
Liked the tools I had been finding but it seems I could only locate the axis lubrication tools as a set and the tool to help remove filament tubes separate. I wanted to put them all in a nice set and since I like magnets and am low on…
Simple part designed to connect 38mm Festool Dust Extractor hose to M18 sander.
Tool for easy cleaning holes of Bosch meat grinder drilled disks. Tested on MFW3X17B model. Printed with PETG but other materials can be used as well.
My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…
It's a Credit card-sized, precise measuring tool. So I have created this tool and want to share it with you as I am sure you have been in this situation as well. You are outside, without your caliper and you just need to find out the…
Qidi 4 plus tool head with Wiley Coyote air holes on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with a Devil Girl silhouette air hole on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Them : An AWG 22-24 wire wrapping tool will cost $29.95. Me : U MAD BRO? Best printed with 0.1mm layers. Feel free to remix - Add a longer handle or turn it into a hex bit. Scale it to fit different wire sizes.
I designed this calibration probe to use the leftover 4mm dowels and bushings from a StealthChanger build. It's also built around the hartk1213 sexbolt Z endstop PCB. It works similarly to the sexball probe that is commonly used for…
Instructions as per cmh's source print. I had already been using a 75mm reference point with a less refined tool and the 80mm design by cmh works extremely well so I edited his design to suit. It seems that there is no set standard (I…
One wall on first layer, enable support, easy print Holes for 5x3 magnets and self-tapping screws for fan mount (07/02/2025 New toolhead designs uploaded) (05/02/2026 New toolhead designs uploaded) (05/05/2026 New toolhead designs…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains an optogate . These boxes fit the inlay of my Peli 1560 that I will share in the next days. For the hinges use M3x25 mm…
Tool to install front seal to Mopar TorqueFlite 727 transmission while transmission is not disassembled. Printed in PLA
As simple as praticle. All tools can be reversed. History : • 2024/12/23 : Return of the “FaucetAeratorDriver” but redesigned • 2024/12/05 : v3 is a contest update, smaller tolerance and new designs to reduce amount of material even more…
The original concept was a crevice tool long enough to reach the bottom of the clothes dryer's lint filter slot. I found, I'm now using this more than Tineco's crevice tool for general cleaning around the house. Printing Printed in PLA…
This is my version of the QIDI Plus 4 print head cover. Front and rear covers. Plug and play is installed. The rear cover has a place to install a 2507 fan. There are 2 free connectors for 24V fans on the head board. In the “QIDI Plus 4…
As @Balesz_1733004 recommended I added V2 model file pipe_thread_measere_tool_v2.stl with wider pipe shoe and round edge.
I didn't use the plastic label covers so I needed the end caps to be thicker.
A model I made to store my Wowstick electric screwdriver and accessories in the top of my mini toolbox. My toolbox is the Kobalt version, but this should fit others. Dimensions are 145x270(mm). I got my Wowstick here (affiliate link) -…
Since some people noted that it can be difficult to break free some of my gear rings and that the one with inside knurling can be uncomfortably rough (matter of taste), I made another variant with a smooth inside, but with two grooves for…
Remix of @Yathani's pottery rim Adjusted through parameterization, contact me if you'd like other sizes made! I recommend printing the longest 3 ribs if your bed can fit it.
With this tool you can make nice decorations for the gift boxes etc. Phases, see picture titles: Two body rings bottoms up Press them together, smaller to top, see the orientation Turn unit top part up, add position 1 finger Place rest of…
Start slow, and speed up as needed. Can use sides to cut paper.
This is my design for a modular multi purpose tool. It is: a stand for: a smarphone or a calculator; a laptop or tablet, if you print two ones and place them side by side; two hooks; a cable runner if you use only the Festool multihook…
No pude encontrar un portaherramientas que realmente me gustara, así que hice la remezcla quitando las ranuras para tarjetas SD y agregando espacio para un calibrador digital.
Понравился дизайн,переделал для Ender 3v3, тем более для этого принтера вовсе нет никаких крышек,а моя сломалась... Скрестил оригинал и от k1.
This is a pair of brackets, top one open and the bottom one cupped, for Milwaukee Packout toolboxes. Designed to hold long items like welding rod or paint poles and rollers, they are sized to allow them to be sleeved with 2” Schedule 40…
Tool holder, I'm using it for paintbrushes, markers, pens, wire cutter, flash drives, and more! It also fits make up brushes well. Category: Organization
Render preview: Here's a quick video demo: Assembly diagram for compressor setup Assembly diagram for vacuum pump setup BOM (with links) M3 x 10mm (x8) for attaching the top M3 x 22mm (x2) to attach the valve Male Thread Quick Release…
Both models are printed without supports. The models are connected with an M4 screw and nut.
2x Halterung für WERA Tool Check Plus - 37x9er Lochwände oder Skadis Passend zu: S37x9 und Skadis Lochwände 2 Versionen: Short- und Long-Bits Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 -…
skeleton Festool battery wall mount leyer hight 0.20mm infill 15%
I wanted to have a single space for 2 sets of my tools & get better at CAD, so i made this model :) Hope it's helpfull to anyone!
The toolhead mount now has the hole profile for a stealthburner and i also added holes for threaded inserts on the top so I can mount an adxl345 accelerometer
The Annoying Gift Tube is a fun model, and very well designed. Sometimes, to mix it up, I print the middle tube a different colour than the other two, which can lead to the threads sticking slightly when assembling. To aid in the first…
Festool Sander base for custom Systainer inserts. Fits the ETS-125, RTS-400, and DTS-400, all of which have the same body. Created by scanning an original Systainer insert and then modeling around it with F360 forms and surfaces. The…
Festool conector to another festool table. Made it for conecting two festool table to make another one bigger, like modular table
Toolbox na základní věci k tiskárně, skalpel, pinzety, kartáček, jehly a další
Before looking at the models available here, I created and tested this balloon tying tool. I think the use is completely the same as the other models. The difference I find for me is that with this tool you can tie highly inflated…
Simple seam allowance tool. I printed mine in PETG with a color change at layer 14 to allow the numbers and markers to be easier to read. It would also work just fine in PLA. I printed with 50% infill however I believe it could be done…
Simple radius measuring tool witch can measure radius up to 150mm can be printed without ams pause is added in preset if not pause needs to be on 25 layer
1x5 Gridfinity bin for Wera Tool-Check Plus.
Fancy Chair. For Personal Use only. For more models, characters, products or commercial license 👇 thangs.com/designer/ELEMENTO *Credit/mention to “elemento_artz” is required
Hello, This is a self designed Mount for the included tweezers, clipper, sd card reader as well as a printed bed scraper and a pair of scissors. The bed scraper is mounted using a nail, for which i created a slide mechanism. Happy printing!
Aufbewahrungsbox für INBUS® 73660 Schoneinsätze mit Größenangabe. Ich habe die Box in PETG gedruckt, da ich sie im Auto aufbewahren möchte. Storage box for INBUS® 73660 protective inserts with size specification. I printed the box in PETG…
Simple holder / distances for plywood or similar 3-6mm thick, adds 6mm of space to the honeycomb. I have added 17.5x5.5 magnets at the bottom to fix the object at the desired place. There is also a wider version with 2 magnets at the…
This is a mount for a 3010 fan meant to connect to, and cool, BTT EBB36 toolboards with some metal standoffs. This was designed for use with the Calamity Toolhead and this EBB36 mount . Hardware Metal standoffs, 25mm+ (depends on how…
MMU3 tool for easy tension adjustment MMU3 This tool can be used to quickly restore the correct tension. Screw in the screw so that the top is exactly flush with the surface. It is possible that my setting differs from your setting due to…
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
This is a mod to allow CPAP cooling with the Calamity Toolhead, featuring a new duct design optimized for CPAP. If using in an enclosure, make sure you print this out of something like ABS or ASA! Print Settings Infill: 40% Walls: 5…
Plastic containers Box for Systainer Organizer. The boxes are fuly compatible wiht the original containers and the gen3 Systaner System. Stack 2 on each other the hight is by 68mm. Printing The Modells are designt with following printing…
![Faucet Aerator Wrench & Tools v3 [24 mm]](https://media.printables.com/media/prints/1094252/images/8449547_939697b7-9971-4c40-baec-6d48fe32a572_18e6f731-c9f2-44ff-9f79-f4303836602e/preview_v3.jpg)
