Multitool third arm
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.52 – €1.86 net (excluding VAT)
For file: SOLDERING_FAN_PART_2_0.2mm_PETG_MK3S_1h46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.69 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 1.76 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Multitool third arm
- Rating
- 4.875 / 5
- Likes
- 2,237
- Downloads
- 2,986
- Makes
- 8
- Views
- 31,182
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The ideal third arm for your workshop or office.
Much more than just a tool. This is the multifunction and electrified tool holder.
Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical tools can be created or modified to mount on this arm.
For assembly of the base arm you will need:
- 4x M6x20mm hex screws
- 6x hex screw M6x35mm
- 1x FHC screw M6x30mm
- 10x M6 hexa nut + one nut per additional tool
For the electrical part (for electrified tools), you will need:
- 12x small zip tie
- approximately 1 meter of 2x1mm² cable
- a 19x13mm switch
- a 5v, 12v or other transformer depending on the electrical components selected
Accessories avalable:
- Strip led light
- Soldering exhaust fan
- Phone holder
Accessories under development:
- Vice
- Wire holder for soldering