Counting matching models…
Videos: https://youtu.be/AlD5KGxMANU https://youtu.be/q9qEr93DqzI Hello all, I have been working for a few times now on a system that would allow disabled people, that lack of mobility in their fingers and hands, to use normal everyday…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Choose 9 attachments to print and assemble this multitool. Print Lower, Upper, 2 Nuts, and 9 spacers. The nut is hard to screw on with hand, use a tool if possible. Print threaded parts in high-quality settings. (i used 0.16mm layer…
An organizer for 7 EDC pocket items such as typical sized pocket knives and mulitools. Deep finger notches are provided for easy access. A 30mm tall bottom / basement bin is included to raise the height of the bin to be suitable for ~90mm…
The multitool can be used as a parallel fence, spirit level or pair of compasses. The hole is intended for the compass, so you always have to add 1 cm to the scale. The preparation for the spirit level is designed for a standard 40x15x15…
EDIT: I've made a better detachable version! I recommend using it instead: A short 1-slot USB implement. It fits very nicely in my Roxon Mini Flex Companion. For usb drive, you would want to use an ultrasmall drive like this or similar:…
Leatherman Sidekick/Wingman Gridfinity Module This 3D printable Gridfinity module is designed specifically to hold your Leatherman Sidekick or Leatherman Wingman multi-tool. With a precision-fit compartment tailored to the dimensions of…
I love the original tools but really wanted a Multitool so i've remixed them to create a better version in my opinion. If you liked the original you'll love my take on it print two of these with the two tools joined together it's much…
This is a 1x2-grid storage box for multitool blades. These come in ¼, ⅓, ½, ⅔ height (where full height is 75mm), so you can print a few and keep your used/new/wood/metal etc blades nicely organized. The boxes are compatible with…
This model is a custom holder designed for the Leatherman Wave Plus multitool, allowing it to be securely mounted on a Skandis board. The holder ensures that the multitool is easily accessible while keeping the workspace organized and…
I did it for my Bosch Oscillating Multitool sanding pads, and also for the size sandpaper from Parkside.
Hello! I design this assembly for the CMF Phone 2Pro. I hate find myself in the need of a tool and not having it. Cover designed to be printed on the short side of the cover (do to the slots inside). Tools/features: Knife Scissors Bottle…
print tips: measure multi tool before printing for minimal filament wastage 130% will be more than enough for most multitools. this model looks best when printed in black or color(ex. rainbow).
This is a multitool I designed for work. It includes: file, grip, pry bar, box opener, driver, scoring tip, key ring, bike spoke key, and a bottle opener. It is meant to be lightweight and easy to carry around. I made it out of one piece…
This is a highly versatile 3D printed survival multitool designed with modularity in mind. Perfect for camping, hiking, gardening, or emergency kits , it includes interchangeable heads such as shovel, pickaxe, hoe, compass cap, and more —…
Introduction A mount for the Specialized EMT Mini multitool on the bottle cage mounts of a bike. The tool has a snug fit, but for mountainbike-purposes I strapped it down with a velcro strap. Print instructions Personally, I used 50%…
Hi if you want to help me with may way to progres here is my patronite https://patronite.pl/GB2005/description?podglad-autora Thank you!
This is a hard case belt holster for an older version TopSaw chainsaw multitool ... it came with a soft case, but it's a bit meh. Still working on the catch mechanism and it needs some testing, but the basic design seems sound.…
This is the last phone case you'll ever need! From its metric nut wrenches and screwdriver to its handy detachable comb that also acts as a back stand, this phone will help you in any pinch. Printing Instructions: Print each part…
Made the thrid arm a while ago and did some modifications while printing the parts. Hope these are helpful. OpenSCAD source: https://github.com/spegelius/3DModels/tree/master/Multitool_third_arm_remix
Its just a 2x1 gridfinity for pursuit multitool. Btw, the perfect gift. Printed in PETG, 0.2mm. It fits exactly, as my son ask for. Without any border... Maybe if you print in 0.4 layer, can fit tight
Hi if you want to help me with may way to progres here is my patronite https://patronite.pl/GB2005/description?podglad-autora Thank you!
EDIT: I've made a better detachable version! I recommend using it instead: A short 1-slot USB implement. It fits very nicely in my Roxon Mini Flex Companion. For usb drive, you would want to use an ultrasmall drive like this or similar:…
The original base of the multitool third arm wasnt up for the task in my application. It is much sturdier now. It uses the same hardware as the original. I've also included the model so you can remix as you need.
I love the original tools but really wanted a Multitool so i've remixed them to create a better version in my opinion. If you liked the original you'll love my take on it print two of these with the two tools joined together it's much…
Print Settings: Layer height: 0.05mm Nozzle: 0.4mm or 0.2mm Material: PLA Supports: snug, rectilinear Brim: optional(depends on printer), I used in and outer brim with 12mm width Extra materials: Magnets: Here are the magnets I used;…
The holes fit 2 10mm x 3mm magnets. The back is left blank for you to add you to add your own clips, loops, pegs, etc I used 3 of these clips on the back of mine https://www.printables.com/model/163273-clip Holds strong in every direction…
GeoCaching 400: PET - Universal-Adapter - Multitool - M6/KSW22 - Mount => Uni 400 Unzählige Kombinations-Möglichkeiten => Finde selbst die beste Möglichkeit für GeoCaching und Transport Adaptions-Möglichkeiten: - PET Konkav/Konvex-Adapter…
print tips: measure multi tool before printing for minimal filament wastage 130% will be more than enough for most multitools. this model looks best when printed in black or color(ex. rainbow).
Dynaplugs are the best tubeless tire plugs on the market, but the replacement tips are so expensive and sometimes hard to find in Europe. I have rarely been able to get a secure seal with a normal bacon strip. By 3D printing a disposable…
This is a simple design I made to hold my Milwaukee M12 FMT multitool. I wanted to be able to hold all the accessories while keeping space for sanding disk and blades. The body is split into two parts because the full model does not fit…
Its just a 2x1 gridfinity for pursuit multitool. Btw, the perfect gift. Printed in PETG, 0.2mm. It fits exactly, as my son ask for. Without any border... Maybe if you print in 0.4 layer, can fit tight
This is a spare ferro rod (fire steel) holder with whistle for the Bibury 2038B (22-in-1) Multitool. I didn't find the original 5mm rods, so I also put 4mm and 6mm diameter. For the 6mm you need to "pre-use" them to flatten and make them…
PocketPilot 10-in-1 Multitool The PocketPilot 10-in-1 Multitool is a compact, lightweight everyday carry (EDC) tool that packs serious functionality into a keychain-friendly design. Built for daily use, travel, and winter driving, it…
This is a custom insert designed to fit the BOSCH L-BOXX 102. It is tailored for the L-BOXX 102 with an insert and charger for the GRO 12V-35. The design is easy to modify and adapt for other equipment if needed, and it is arranged in two…
I found opening the tools could cause the neck to bend and snap on the original which was designed for fabricating from metal. Now there is less gap when the tool is closed, and thicker area at the neck. Also slightly sticks out of scale…
Introduction A mount for the Specialized EMT Mini multitool on the bottle cage mounts of a bike. The tool has a snug fit, but for mountainbike-purposes I strapped it down with a velcro strap. Print instructions Personally, I used 50%…
Holds a Leatherman Wave multitool on a Skadis. Attaches to the Skadis with 2x 2.5 mm Skadis T-nuts . Materials & assembly Pick whether you want to use 1 or 2 T-nuts for mounting. 1 T-nut worked just fine for me but 2 would add some extra…
Printed the original and noticed it didn't fit my blade. Mine looked the same at first glance so I just assumed it was a craft blad but the dimensions were slightly different. So I threw it in tinkercad and fixed it! If you're having the…
12V Multitool Ferm Holder English: "Holder for your 12V Ferm multitool, providing organized storage for easy access." Français : "Support pour votre multitool Ferm 12V, offrant un rangement organisé pour un accès facile."
This tool can help with insertting connectors into the base multiboard grid.
Provides the same functionality as https://www.bosch-professional.com/gb/en/depth-stops-basic-for-multitools-2893861-ocs-ac but with only one depth and all around the blade. Center hole diameter is 37,5mm.
For the Champion Dual Fuel Inverter Generator I found myself searching for some tools every time I would start it. These where a screwdriver for opening the side lid to check the oil level, a socket wrench to tighten or release the holder…
MultiTool Pocket is the ultimate everyday carry. Say goodbye to bulky key chains and cluttered tool kits! The MultiTool Pocket is your sleek, ultra-slim solution for everyday problem-solving, designed to magnetically attach to the back of…
This is a stretched and cut up version to fit the Ryobi HP oscillating multitool. The tapered sides to save some filament and make the overhangs a bit less reliant on supports. Printed with Spectrum Sulfur Yellow PCTG (pictured) 0.6mm…
To avoid the annual mayhem of wrapping presents use the Dromonem! Features box cutter/label peeler ribbon/wrapping paper cutter ribbon curler ruler folding/creasing edge sticky tape dispenser (rotating wheel and cutter) hardware (I am…
Adapter for connecting a Cen-tec Quick-Click dust extraction hose to your Ryobi R18MT Multi tool. I have not checked if it fits any other Multi tool machines but if you want to try it, measure the head of your tool and confirm it's 38mm…
This credit card multi tool with some para-cord will get your keys out of sticky situations. Also includes a groove to hold some tape, a ruler and a tool to measure the most common types of screws. Needed but not required 5mm magnet.…
12 in 1 Clay Sculpting Multitool (in progress, but fully functional) Tolerance very generously for my abused printer Will probably have to hone the edges of the scrapers, but the knives are sharp The handles are comfortable, but the…
Holder for multitool hidden in the case. Allows to mount the tool in a horizontal position, e.g. in the glove compartment of a car. Uchwyt do multitola schowanego w etui. Pozwala na zamocowanie narzędzia w pozycji horyzontalnej, np. w…
A yet another multitool for fpv drone, also you can use standart screw bits Print petg 100% infill with supports
USB Multitool Desktop Organizer Can Hold Up to 6 USB Drives And 4 SD Cards Includes A Large Compartment For Pens And A Secret Drawer Notice! USB Drive Or SD Card Are NOT Included
Take Grab it and Mix to the next level. PowerMix Go Multifunctional Grip Handle : Power, Grip, Phone Stand, Cable Organizer — is an multitool accessory for the Hercules DjControl Mix. This all-in-one accessory enhances your mobile mixing…
I desinged an holder for an Milwaukee Multitool M18 I printed it in PETG
A wallet multitool with a school friendly box opener, fidget spinner, compass, phone stand, ruler, and USB drive. Printed out of fiberon carbon fiber petg at 20% infill recommended settings: 20% infill Any filament except silk PLA 0.2 mm…
The existing Multitool holders are far to big for the one I got as a present. So I made my own. Because of the small size of the container itself, the best way to get it out later it is to pull on the upper half.
Just a quick print for a little “sheath” to slide over a Swiss-Tech 6-in-1 multitool. The arms on my multi-tool tend to not stay in place when it's in my pocket, this fixes that, and protects the inside of my pocket from the screwdriver…
Permet un rangement et un accès simplifier des embouts. Possibilité de charger l'outil sur son support.
A simple holder for the DeWalt oscillating multi-tool, for the Honeycomb Storage Wall It is also just a very generic 2 prong holder, I just happen to have made to hold my Multi-tool, I'm sure you can use it for anything that fits.…
Remix of this great model for holding dewalt power tools only now for a french cleat wall
This is the EDC-Handy Multitool. A small 70x20x10mm EDC, that can do quite a lot for its little size. Features! It has three sockets, 8,10 & 13mm, perfect for the most usual small caliber nuts and bolts. The sockets has a center hole for…
A remix from OldGuyMeltsPlastic but ready for multitool. It has 2x PG7 and 2x Bowden holes. Also maintaining the hole for a thermistor. I've also made a version that has the Voron logo in the middle.
Reverse engineered a (customisable) dimensionally accurate housing for the Ibanez MTZ11 Multitool. Can be easily customised and modified as needed. RMT Edition STLs have slightly refined curves to make the part easier to print (and use!)
A basic storage pocket for (As shown a dewalt multitool) when not in your pocket. wall mountable, I've used double sided gorilla tape as it's a light item but have included a STEP file so you can add screw holes, or peg board clips etc. I…
I made this for my 3D CAD modeling class. The scraper works great for 3d printers, and the comb works somewhat well for hair. The hole in the middle was intended for a magnet but I scaled it wrong. The bottle opener doesn’t work. Print…
I wanted the flush multiconnect point, but I wanted to have the multitool holes on the head for easier installation and removal.
My fingers can't properly pry out the USB cable on the DJI RC-N1. Instead I would have to use my nails which causes the plastic on the cable to get scratched and damaged. So I designed this pry tool which allows you to quickly and easily…
This is my 100th model on PrusaPrinters and I thought I should make it something special. So here it is my Open Source Magnetic Multitool Bottle Opener Hex Key Holder Ringpull Assist Fridge Magnet designed around the hex key set that came…
Rugged box for safe storage of multitool/oscillating saw blades.
a short 2-slot bit holder implement, able to hold three 4mm bits. It is specifically designed for the Mini Flex Companion; it will likely fit in other short slots, tho I've not tested yet. EDIT: Tested, It will fit in the Flex Companion…
I realised the sleeve that holds the scalpel in, went missing when I almost stepped on the blade lying on the floor. Couldn't find the sleeve that held it on, so designed a replacement. It's in two parts. The flat piece fits into the…
The design is more sturdy then the drill press it was based on and had a longer stroke because of the lengthened toothrack. its also more stable due to the spring guide rod wich runs into the body of the press. I used an airsoft spring…
This piece is a 1/4'' bit screwdriver adapter for multitool files.
The original base of the multitool third arm wasnt up for the task in my application. It is much sturdier now. It uses the same hardware as the original. I've also included the model so you can remix as you need.
If your pocket feels like it’s storing a brick instead of a multitool, this frame fixes that problem. It’s designed to replace the stock outer plates on many generic multitools and slim the whole thing down by a noticeable amount. On my…
Print Settings: Layer height: 0.05mm Nozzle: 0.4mm or 0.2mm Material: PLA Supports: snug, rectilinear Brim: optional(depends on printer), I used in and outer brim with 12mm width Extra materials: Magnets: Here are the magnets I used;…
openGird holder f. multitool AEG BWS 12 use multiconnect PLA oder PETG
My multitool has a terrible Phillips screwdriver, so I decided to turn the Victorinox A.7235 Quattro into a pendant to carry with it. These are very easy to buy as replacement parts for different Swiss Cards and cost just a few euros.…
This is designed for the Mossy Oak 17-in-1 G10 Multitool, as well as other tools based on the Dakoyu Triton. For the press fit thumb studs, I print a handful of them at slightly different sizes and pick the one with the best fit. 102% is…
This print allows you to carry a Leatherman style micro bit driver on a Mossy Oak 17-in-1 G10 Multitool, as well as other tools based on the Dakoyu Triton. The edge is shaped into a chisel for picking or scraping. The ends of the slot…
This allows you to fit 6 Leatherman flat bits and 2 SAK scale tools in a Mossy Oak 17-in-1 G10 Multitool. This is also compatible with other tools based on the Dakoyu Triton. This mod takes the place of the saw and file on the tool. 4…
Best non weaponized door stop on the internet Designed by: ChrisMUC https://www.thingiverse.com/thing:200571 Print instructions Printed in TPU using the 'Generic FLEX' settings @.2mm layer height. WARNING: You must use glue stick or some…
The holes fit 2 10mm x 3mm magnets. The back is left blank for you to add you to add your own clips, loops, pegs, etc I used 3 of these clips on the back of mine https://www.printables.com/model/163273-clip Holds strong in every direction…
GeoCaching 400: PET - Universal-Adapter - Multitool - M6/KSW22 - Mount => Uni 400 Unzählige Kombinations-Möglichkeiten => Finde selbst die beste Möglichkeit für GeoCaching und Transport Adaptions-Möglichkeiten: - PET Konkav/Konvex-Adapter…
Print Settings: Layer height: 0.05mm Nozzle: 0.2mm Walls: 4 Top and bottom layers: 4 Infill: 10% Material: PLA Supports: snug, rectilinear Brim: optional(depends on printer and filament), I used an inner and outer brim with 12mm width…
Dynaplugs are the best tubeless tire plugs on the market, but the replacement tips are so expensive and sometimes hard to find in Europe. I have rarely been able to get a secure seal with a normal bacon strip. By 3D printing a disposable…
This is a simple design I made to hold my Milwaukee M12 FMT multitool. I wanted to be able to hold all the accessories while keeping space for sanding disk and blades. The body is split into two parts because the full model does not fit…
Its a printable Holster for the SOG Powerpint, the very small (just 83mm) Multitool. Its a snug fit, so the tool will not slide out on its own. Also you can leave the belt clip on the tool since its asymmetrical. This forces you to put…
Fully 3D printable pliers-style multitool styled after the Leatherman Charge Plus ( https://www.leatherman.com/charge-552.html ) No screws or springs required, some filament is used for hinges. Assemble the Pliers LAST for an easier time.…
Fits Bosch part# 2609256d57 Dust extractor for PMF250 CES/PMF350 CES. The Bosch adapter fits both the blue and the green series. Category: Tools
Replacement for tyre lever in the Fischer multitool for bikes. I printed it with PETG and perimeters only. The nose part needs a little bit of support.
simple wall mount for multi tools - fits hikoki no supports needed
This is a spare ferro rod (fire steel) holder with whistle for the Bibury 2038B (22-in-1) Multitool. I didn't find the original 5mm rods, so I also put 4mm and 6mm diameter. For the 6mm you need to "pre-use" them to flatten and make them…
I've seen models for a Multiboard mount for the 2426-20 Multitool. This one fits my 2626-20 and was adapted from a Makerworld model for Multiboard.
An add-on to the Knipex Multitool Sheath v2.0 by SwissMods to attach the extension from the Steinwhale Short Stubby Mini Screwdriver set. Printed on a smooth plate with Elegoo Rapid PLA+, plate temp upped a bit to keep the small part in…
I recommend to use PETG or stronger. PLA could bee too brittle for the tie wraps supports Needs tie wraps and a velcro strip. maximum dimensions for the multitool : 18mm deep 45mm wide 72mm high
![[ALCH] Stackable storage boxes for multitool blades (ModuBox)](https://media.printables.com/media/prints/3df5b320-2252-4dd4-ab2e-78bcfee6cbfe/images/9921554_e7d8db92-9584-4e7e-b424-a95f5fa774f7_bbace89b-bf0b-494e-8d8f-ad49f9e5c46c/img_4220.jpeg)
