EDC-Handy Multitool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is the EDC-Handy Multitool.
A small 70x20x10mm EDC, that can do quite a lot for its little size.
Features!
It has three sockets, 8,10 & 13mm, perfect for the most usual small caliber nuts and bolts. The sockets has a center hole for the bolt to pass through to reach nuts. That's what she said!
The hole in the back, is ment for a lanyard or a keyring.
The 1/4" hex holder fits nicely, and even has a 4x3mm hole in the bottom so you can add a magnet.
The reserve bitholder in the back also has the same magnet hole.
In the front is a handy bottle opener:)
Printing
The model is about 12g with PLA 100% infill. and prints in about 55min with my Bambu Lab P1S
i have printed in PLA, ASA, PETG & ABS.
As long as you choose something stiff and strong, and print with 100% infill it can handle quite some torque before it breaks.
It's plastic after all:)
Hope you enjoy this little gadget:)