Counting matching models…
Straightforward cover for the EBB36 Gen2, which has a different shape than the classic EBB36 and thus requires a new case. Flip onto the top and print, add supports on print bed only
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
I've always wanted to measure how good my cooling ducts actually are—not just guess. So I got myself an anemometer and ran some real tests on my Spartacus toolhead! In this short video, I show the results from different fan + duct setups…
This is the Sentinel, a small, compact direct-drive printhead for the Rook 2020! Uses a Creality heatsink and heatbreak (recommend all-metal) and a CHC or CHC-Pro for a super compact hotend. I've added a version for the Trianglelabs CR10…
Original Bambulab hotend & CR touch z probe version. There is also BIQU Microprobe & E3D Revo CR remix versions now. Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic…
Toolhead to be mounted on every 3D printer with Linear Rails MGN12H mounted on side (not on top of aluminium extrusion). Remix is adapted to use with Orbiter v2.0 extruder and Rapido HF hotend. On images toolhead mounted on Biqu B1 (if…
Please refer to our Toolchanger Github for more information.
This is a toolhead accessory cable mount and breakout the includes a configuration designed for using a Klicky sensor. I included connectors for every toolhead accessory, including the extruder and hot end heater. The hot end heaters can…
Updated 01.04.24, Revised back plate now Rev2 . Misaligned bolt hole corrected. Budget direct drive extruder, lower cost alternative to the Bondtech LGX Lite. Uses low cost HGX gear sets & 36mm pancake round stepper motor available from…
It is remixed from Github Klicky-Probe/Printers/Voron/v0/v0_STL at main · jlas1/Klicky-Probe repository and credits goes to them. Any additional guide for installation please refer to the github.
TOOLHEAD SHROUD UPDATE:: After some positive feedback I've altered a few things slightly with a view to more tolerance for everyone. updates include: 1.top of tool head cover made larger to fit alterations you may have made to cable feed.…
The reason I made this toolhead was to take advantage of Phaetus's hotend attachment for their APUS extruder, and more importantly I just like how the wheel spinning on the apus looks. Fusion files can be found here:…
Modifications to the original: - part cooling duct for longer nozzle - needs 2 m3 brass inserts - modified cooling duct for E3D heatsink for better airflow and no heatcreep - relocated BL touch mount to the front - bigger channel for…
Something that actually fits on the Rook An all-new toolhead that borrows the nozzles from the dragon burner toolhead that rides on a MGN9 carriage specifically designed for the rook and rook2020 Prerequisites: - 8x M2x6mm button-head…
02.12.23 Rev2. Probe Mount Face raised 0.66mm. New remix version with E3D Revo CR hotend & BIQU microprobe in place of Bambulab hotend & CRtouch. Note: See original CRtouch version for remaining files. Ender 7 replacement toolhead with…
text from original model on thingiverse and credit goes to: https://www.thingiverse.com/joe9216/designs Remixed a couple of models into one. I could not find a model for the dillon 550 toolhead to mount to the wall that included the shell…
Modified for better airflow and more rigid.
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
A tiny versatile ender 3 plotter toolhead to hold markers pens and pencils! It does need improvement, and I will work on it eventually! Don't judge me on what it drew, I'm not good when it comes to software!
Machine Compatibility: Rook (legacy, release, mk1) Rook 2020 (release, mk1) Mythoscale (v19 or greater) Reliability Update: I've put over 100 hours on this toolhead and had no issues. PLA prints excellently with great overhang performance…
After I had a mishap with my Ender-5 Max and Infinity Flow where the PFTE tube popped out of the toolhead, unspooling over half a half kilogram of filament, I decided I needed to prevent that from happening again. So I created a simple…
This is a easier to print cover for the Sovol Zero toolhead. I created this so I could have a custom cover using the Original Parts. The Screws for the fan may need to be replaced with some plasic self-tapers and washers. I am Including…
New remix version with BIQU microprobe in place of CRtouch. Note: See original CRtouch version for remaining files. There is also a E3D Revo CR remix version. Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh…
9/23/2024 UPDATE: Tested Successfully Have connected and tested now, these are working great! If using KUSBA or other USB connected accelerometers, I found that an easy way to get connected in klipper is to use /dev/serial/by-path/xxxxx…
(THİS MODEL NOT TESTED YET) İf you decide to print it please contact me about its perfprmance so ı can improve it sadly ı can't test ıt because ım out of ABS filament. Print it with ABS for best results
These X-Carriage pieces allow the Mini Stealth toolhead to be mounted on the E3NG printer. They work with the new Mini Stealth rigid core pieces and use a pair of M3x45 BHCS plus a pair of M3x12 BHCS to secure the core to the…
Either modify an existing printed part, or print this model with standard RatRig printed part settings and recommended materials. It's really easy to modify an existing part and likely has negligible structural impact. Modifying an…
tg73 have a very good instruction https://www.printables.com/model/943447-v-core-4-toolhead-easyfit-mod-removeinstall-the-to
Modification of the Apogee toolhead to allow for mounting a PINDA-style 8mm inductive probe onto the toolhead. Utilizes the nuts and washers that came with it. Started with the BL-touch mount and modified it for inductive probe and…
I wanted to create a whole new toolhead using a phaetus dragonfly BMO. You can use the original linear bearings or change to sintered bronze bushings. It is necessary to change the original drive belt to a slightly longer one (~5cm longer…
This is a remix of this toolhead: https://github.com/Annex-Engineering/Annex-Engineering_User_Mods/tree/main/Extruders/Sherpa_Mini/Toolheads/EdwardYeeks-Voron0 to allow the use of zodiac x phaetus BMO hotend (which has a non-removeable…
I took the Rapid Burner toolhead parts by Chirpy2605 and crudely adapted it to fit the Peopoly Lancer hotend. The Lancer (long melt zone) from Peopoly's Magneto X is only $35 with a flow rate up to 60mm3/s but I couldn't find any open…
Nozzle cam Mintion for XOL toolkit So here it is the adapter XOL for the mintion nozzle cam. It is based on the prusa version but blended all the bits including the electronics board box into the face part of the XOL toolkit . The lid for…
Tobor: Pen and Drawing Toolhead Find additional source files, code, descriptions, and more here https://www.crowdsupply.com/evezor-inc/tobor-robotics-and-automation-platform Drawing pictures with robots is fun, and pen a paper is a great…
Lightweight bowden toolhead, for Ender printers. work with original MK8 hotend and original ender 2,3 carriage. Print the hotend mount in ABS or ASA, other parts are PETG or best. inspired by Timlogy 's voron 0 toolhead
Upgraded my i3 mega to the excellent mk4 x-carriage and wanted to upgrade my stock hotend to a pheatus dragon and the extruder to a sherpa mini, so I adapted this. been working great for over a year now :-)
UPDATE As I mentioned below this is more of a project then an actual print. I am working on adding support for the Box Turtle AFC system. I am currently in a testing phase now. I also plan to add support for OpenPrintTag and OpenTag3d!…
works great for me with mini sherpa, nitehawk 36, cpap cooling, crossbow cutter,CHC XL Wr Air and biqu microprobe.
Uses m2 Screws and m2 Brass inserts. Feel free to modify, but it works. (you see the bulk of the print and the tip of the nozzle)
In my opinion the original bracket is too thin and I didn't feel comfortable with it. So I opened it in Fusion and made it thicker. The Orbitool 2 toolhead board still fits, only the “outside” is edited. I used these settings and printed…
If you like my work consider supporting me on boosty , thank you.
Blocking air from the auxiliary cooling fan and adding outlet on the front. To prevent nozzle clogging when using the auxilary part cooling fan. Print at least in PETG. ABS or ASA is recommended. You'll also need some round magnets…
One wall on first layer, enable support, easy print Holes for 5x3 magnets and self-tapping screws for fan mount (07/02/2025 New toolhead designs uploaded) (05/02/2026 New toolhead designs uploaded) (05/05/2026 New toolhead designs…
This is my version of the QIDI Plus 4 print head cover. Front and rear covers. Plug and play is installed. The rear cover has a place to install a 2507 fan. There are 2 free connectors for 24V fans on the head board. In the “QIDI Plus 4…
Понравился дизайн,переделал для Ender 3v3, тем более для этого принтера вовсе нет никаких крышек,а моя сломалась... Скрестил оригинал и от k1.
The toolhead mount now has the hole profile for a stealthburner and i also added holes for threaded inserts on the top so I can mount an adxl345 accelerometer
This is a mod to allow CPAP cooling with the Calamity Toolhead, featuring a new duct design optimized for CPAP. If using in an enclosure, make sure you print this out of something like ABS or ASA! Print Settings Infill: 40% Walls: 5…
A dock to go with Ratrig toolhead beta2 and the front piece and mount in https://www.printables.com/model/963737-mount-for-euclid-probe-and-a-new-front-for-ratrig. The dock is now thicker, so that the lead screw bearing actually reaches…
MODEL FILL MUST BE ABOVE 30% ABS for the best result Don't forget to support me, ı want printables T-shirt
UPDATE 11.05.2025 - Added support for Rapido UHF hotend. Minor fixes for part-cooling. I wanted a toolhead for CNC TAPv2 that also supports big hotend, has CPAP cooling and has clear access and visibility to the nozzle and hotend for…
Modifications to the original: - part cooling duct for longer nozzle - needs 2 m3 brass inserts - modified cooling duct for E3D heatsink for better airflow and no heatcreep - relocated BL touch mount to the front - bigger channel for…
Redesigned extruder adapter (Sherpa Mini pattern), redesigned hotend mount (single piece vs two pieces), Beacon probe support. Stuff is being tested, BOM and guides will be added sometimes in the future.
Want an even stronger, chonkier reinforcement? Use this model instead! In a heated chamber, the belt mounts of the toolhead base tend to pull apart and warp the model. This makes the belt loosen over time. This improved version includes a…
UPDATED: 2026-01-05 the V3 models below are the good ones... I have greatly improved the airflow and printability of the model. It is now possible to print with the front face at a 45 degreee angle to the build plate, which greatly…
These X-Carriage pieces allow the Mini Stealth toolhead to be mounted on the E3NG printer. They work with the new Mini Stealth rigid core pieces and use a pair of M3x45 BHCS plus a pair of M3x12 BHCS to secure the core to the…
Replaces printer toolhead with a mount for a pen to use your printer as a plotter. Print parts in the provided orientations. This is intended to be printed with 0.2mm layer lines, though you can go finer. Parts should be printed in the…
Updates: 04/12/2025 - On popular demand, added a second circular gap to the left side of the toolhead, towards the exit path of the fan output, for the hot air to exit. I remixed the original model, which head very thin side walls (it was…
Update 11.08.2026: Added EBB36 Gen2 toolboard mount for the LGX Lite v2 and Moschito Magnum+ Liquid spacer Update 29.07.2026: Added 19 ID hose duct for the EBB42 Gen2 / Sherpa Mini combo Update 11.07.2026: Added OS2 toolboard mount for…
From creator: Yes, you can reuse the stock screws and fans for this mod. Print settings: layer height: 0.2mm - 0.35mm line width: 0.3mm - 0.5mm wall line count: 2 - 4 top/bottom layers: 3 - 4 infill density: 5 - 15 percent infill patern:…
SE3D Toolhead Cover for Elegoo Centauri Carbon Before you grab this version, check out v2.0 . This is a redesigned toolhead cover for the Elegoo Centauri Carbon that improves both print quality and day-to-day usability. Key improvements:…
A remix of SE3D model. (14Jun26) New folder organization (25May26) Added frontSkeletonCanvas, frontSkeletonCanvasNotFanScrews and frontVCanvas. Need 5x3mm magnet. Three preliminary front covers for Canvas compatibility. The second cover…
This is a easier to print cover for the Sovol Zero toolhead. I created this so I could have a custom cover using the Original Parts. The Screws for the fan may need to be replaced with some plasic self-tapers and washers. I am Including…
Remixed Synthetic's Toolhead cover to use the stock bolt locations on it with M3x4mm button head screws. Also extended the fan bosses and opened them up some so I could use the stock fan screws.
Integrate the Chube Compact with your Calamity and CPAP setup! CPAP setup currently only works with the LGX Lite Pro. CAD is included if you want to undertake updating the CPAP interface to allow more clearance. General I personally find…
Yokai v3.5 Toolhead ASSEMBLY GUIDE AND BOM (Recently updated from v3 to v3.5, so some of the BOM might need some work) Please let me know if you come across anything that needs to be added to the BOM. QUICK TIP: Get yourself an M3 and an…
You can get the mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition for free when ordering it directly through PCBWay —you only pay PCBWay’s manufacturing cost.…
New and Improved mammoth-3D Toolhead The latest mammoth-3D Toolhead has been completely redesigned for maximum performance and durability. The main toolhead body is no longer FDM-printed—it's now available exclusively as an SLM-printed…
just put two tools togetter by Thingiverse user pggibson and printables PRGeno
⚠ Note: These parts are printed in ABS with tight fits . ABS shrinkage and warping can affect tolerances, so proper filament tuning is essential. We strongly recommend watching our filament tuning video before printing. Before you start…
Toolhead sensor adapter to wire a microswitch as toolhead sensor for Apus 2 extruder. Uses 6 mm steel ball and generic microswitch I had lying around from ERCF build. Model has same footprint as Apus 2, so you can sandwich it between your…
To get full use out of this model, check the files it was remixed from. You will only find the mounting bracket here. This mounting bracket is a bit shorter to accommodate for the jabberwocky toolhead being shorter than the stealth…
Hardware Needed: #4 cutting blade 2 M3x16 hex screws ballpoint pen spring To make this design work there are some software changes needing to be made. I increased the size of the bed to 410 in the X direction in the stepperX section of…
Description The stock model cooling fan duct sucks. Here I have redesigned one. The main purpose is to add air flow guiders so the cooling air could be more even and stronger. To maintain the dimension is important so it would not cause…
Tronxy X5SA Pro Voron Toolhead mount to fit Afterbumer , stealthburner and other voron toolheads. you have to cutdown the orginal plate for the xy belts to clear the motor and the front plate as shwon in photos. the clockwork 1 mount has…
Fits nicely but I haven't fully tested yet. Will update when I mount it. I printed it in solid abs but anything will likely work. Two M3x16 socket head screws. Biqu H2v2x is an underrated extruder that doesn't get the credit it deserves.
Threw this together in TinkerCAD super fast because I have no clue how to design with real CAD programs. Wanted something without magnets as I'm not a fan. The stock screws work well now, just make sure you screw them in and out a couple…
Had a spare BIQU Panda Revo and decided to put it to good use. This mod is only tested with it, but should also work with most of Bambu P1/X1 style hotends. The heater uses 10-12 more watts, but it worked for us. Usual warnings: we are…
THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…
Rigid and reduced air-flow leakage towards parts. (unwanted air over high-temp parts is not good design) X-Plus 3 Part.
EN This is a toolhead for Creality Ender 3 / Pro 3D printer using Orbiter 2.0 + BLtouch + 5015 blower + 3010 fan + NF Smart CR10 hotend + LED light. The toolhead is mounted using screws and heat-set threaded inserts M3 and M4 (ATTENTION -…
UNTESTED - I haven't bought the belt/pulleys yet. Also, do not print with a nozzle >0.4mm in diameter: The teeth look weak enough as is, so using a bigger nozzle would inhibit getting 2 perimeters per tooth. I've been watching the GT1.5…
x endstop mount. bolts above rear fan duct. requires 5mm longer screws. Print in high temp materials
I modified the model to accommodate the Bambu Hotend. I also added clips for better support. Material: PETG Marble White by nobufil Variable layer height 0.22-0.36mm No supports The item in the photos is not the final model; I made a few…
I need to head which include CPAP, goliath or chc xl, crossbow filament cutter, siboor cnc cariage and orbiter extruder, but cant find anything, so im doing by my own. Hotend fan and filament cutter placed backwards for space saving and…
I created these, because I have nozzles with slightly different lengths that I want to run on my Xol toolhead (CHT, Mk8, etc.), and Eddy has a limited range available, in relation to the nozzle. These move Eddy closer to the bed, for a…
Made the new skeletonized version use the old skeletonized magnet system. Credit for this design to Prouting and SE3D
This spacer adds a toolhead filament sensor for your MMU printer! It works with ProtoXtruder 2.0 and StealthProtoXtruder 2.0 . Use 8mm longer screws to mount the extruder to the toolhead. Toolhead Sensor Assembly Credits The filament…
When printing the tiny 1/6 scale benchy you need to make sure the brim is printed in the same color as the tiny build plate. This way you DONT detach the tiny benchy from the brim but just CA glue it on. Use CA glue to attach the…
works great for me with mini sherpa, nitehawk 36, cpap cooling, crossbow cutter,CHC XL Wr Air and biqu microprobe.
After I had a mishap with my Ender-5 Max and Infinity Flow where the PFTE tube popped out of the toolhead, unspooling over half a half kilogram of filament, I decided I needed to prevent that from happening again. So I created a simple…
Atlas Toolhead is now Sphoore For my own 3D printer design, Atlas, I originally developed the Atlas Toolhead, a modular system including ABL, wide hotend compatibility and dual 5015 part cooling fans. The first iteration I published was a…
🐉 Forget AI. You need the Dragon. We realized modern 3D printers have a flaw: They are boring. We have LiDAR, AI spaghetti detection, and accelerometers... but none of them have soul . None of them look at you with disappointment when you…
Magnum Plus Hotend Toolhead for RatRig4.0 & 4.1 Since Disrupt has not been officially released, I designed this as an independent model based on reference photos. Only three sheet metal parts need to be fabricated, so the production cost…
Toolhead designed exclusively around CNC TAP and Goliath (CHC XL, Goliath Lite etc) hotend. Monolithic design, proven hotend radiator cooling, proven part-cooling. Can support Peopoly Lancer Long IF you cut the radiator down in size and…
Overview: First of all, feel free to ask questions and leave sugestions what to add to the MMU/instructions. I built WKMU based on the working principles of AMS Lite (Didn't know that at the time). It uses 4 secondary stage extruders that…
Creality Ender 3 v3 GlaDOS Baskı kafası. 10+ saatlik baskı testinden sonra hava akışında bir sorun görmedim. PETG ile basmanızı öneririm. GlaDOS toolhead for ender 3 v3. tested for 10+ hrs. PETG recommended.
Edited the existing WWG2 mount to support the EBB36 Gen2. Added clearance under the top of the board and slightly increased the standoff height.
This mod allows the integration of the btt eddy duo, inside the toolhead cover, making a more compact unit, and almost original look. Btt eddy can run pretty hot when printing ASA, and to compensate that, some venting holes were added to…
![Sentinel [Rook 2020 Toolhead]](https://media.printables.com/media/prints/504740/images/4098868_94ea77e0-a556-41a3-af2b-3d19c669240e/img_20230613_230044.jpg)
![Jerry - Toolhead cover for Ender 3 V3 SE [STOCK FANS VERSION]](https://media.printables.com/media/prints/5b0d82a9-18c6-4ab0-bcda-17448a025912/images/11161636_55642d7d-4daf-4163-b020-535091a0d2a0_b5e048e5-723b-41dc-97fe-a2c2b466ac48/582435764_775464795522543_8124948497983347104_n.jpg)
