Calamity Toolhead - CPAP Cooling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An optimized CPAP cooling solution for the Calamity Toolhead
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 63
- Makes
- 1
- Views
- 1,323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mod to allow CPAP cooling with the Calamity Toolhead, featuring a new duct design optimized for CPAP.
If using in an enclosure, make sure you print this out of something like ABS or ASA!
Print Settings
Infill: 40%
Walls: 5
Bottom/Top: 5
Hardware
4x M3 Heat-Set Inserts
2x M3x8
2x M3x12~
2xM3x10~
Installation - Refer to images for additional context
Install the heat-set inserts into the 2 ducts for the Beacon mount
Install the heat-set inserts into the Beacon mount
Install Beacon probe onto the Beacon mount
Install the 2 ducts first to the Calamity toolhead
Glue the CPAP interface onto the 2 ducts
Install the Beacon mount onto the ducts
Klipper Config Changes
[stepper_x]
position_min: 13.5
position_max: 284.5
position_endstop: 284.5
[beacon]
x_offset: 0
y_offset: 22.67
Other Models Pictured
Additional Info/Help
If you need help setting up the Calamity toolhead, or moving to a Chube Air or LGX Lite Pro, my Klipper configs for my Doomcube are here (updated nightly):
Entire Repo: https://github.com/matthewj301/doomcube/tree/main
Calamity Toolhead Portion: https://github.com/matthewj301/doomcube/blob/83ce2610adc1e311a02a6e47a5709a5859ae48d0/custom/toolheads/calamity.cfg
Happy printing!
Like what I do and want to support me? Buy me a coffee!