Calamity Toolhead - CPAP Cooling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An optimized CPAP cooling solution for the Calamity Toolhead
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 1323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mod to allow CPAP cooling with the Calamity Toolhead, featuring a new duct design optimized for CPAP.
If using in an enclosure, make sure you print this out of something like ABS or ASA!
Print Settings
Infill: 40%
Walls: 5
Bottom/Top: 5
Hardware
4x M3 Heat-Set Inserts
2x M3x8
2x M3x12~
2xM3x10~
Installation - Refer to images for additional context
Install the heat-set inserts into the 2 ducts for the Beacon mount
Install the heat-set inserts into the Beacon mount
Install Beacon probe onto the Beacon mount
Install the 2 ducts first to the Calamity toolhead
Glue the CPAP interface onto the 2 ducts
Install the Beacon mount onto the ducts
Klipper Config Changes
[stepper_x]
position_min: 13.5
position_max: 284.5
position_endstop: 284.5
[beacon]
x_offset: 0
y_offset: 22.67
Other Models Pictured
Additional Info/Help
If you need help setting up the Calamity toolhead, or moving to a Chube Air or LGX Lite Pro, my Klipper configs for my Doomcube are here (updated nightly):
Entire Repo: https://github.com/matthewj301/doomcube/tree/main
Calamity Toolhead Portion: https://github.com/matthewj301/doomcube/blob/83ce2610adc1e311a02a6e47a5709a5859ae48d0/custom/toolheads/calamity.cfg
Happy printing!
Like what I do and want to support me? Buy me a coffee!