Liczymy pasujące modele…
ENGLISH : Creating a screen cover for my CPAP machine Löwenstein WM 090 TD, leaving the power button accessible. The support is clipped at the level of the carrying handle. I created a support with and without hook to hold the mask. You…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
A full redesign of my earlier 2020 CPAP hose bridge ( 2020 profile CPAP slim bridge by minilogique | Download free STL model | Printables.com ). Print as is, will need relatively well tuned supports, otherwise you just have to do some…
NOTE: This is compatible with standard rubber hose connectors (default 22mm, but it is customizable). If using the Resmed Airmini, or other travel CPAPs with non-standard hose connectors, an adapter will need to be used. Introduction…
Information Original mod M3x18 x4 for holder halterung M3x5x4 x6 heat insert nut M3x12 x4 40mm fan M3x10 x2 solo duct Mantis mod M3x18 x4 for holder halterung M3x5x4 x10 heat insert nut M3x12 x4 40mm fan Other part M3x12 x4 3010fan 6x3mm…
You can choose if you want cold air for maximum cooling performance while printing your sub 60 second benchy or if you want it a little more cozy for filaments that don't like it too cold. reduces noise levels significantly, doesn't…
This is a mod to allow CPAP cooling with the Calamity Toolhead, featuring a new duct design optimized for CPAP. If using in an enclosure, make sure you print this out of something like ABS or ASA! Print Settings Infill: 40% Walls: 5…
I made this to be able to fit the air filter from the BTT Universal Turbo kit to fit on the VZbot330. It includes a model for a gasket that's printable in TPU to get a nice air tight fit against the adapter. Could lose maybe 2mm in the y…
Integrate the Chube Compact with your Calamity and CPAP setup! CPAP setup currently only works with the LGX Lite Pro. CAD is included if you want to undertake updating the CPAP interface to allow more clearance. General I personally find…
ENGLISH : Creating a screen cover for my CPAP machine Löwenstein WM 090 TD, leaving the power button accessible. The support is clipped at the level of the carrying handle. I created a support with and without hook to hold the mask. You…
This design improves and adapts the attached original models to my needs — hopefully, it will be useful for you too 🙂 Improvements 1) Simplified It is now fully 3D printed. Most parts are designed to be tight push fits. Can be assembled…
Based on the wonderful CPAP and coal filter designed by Smolboi, i've added the 60mm exhaust fan from the voron and combined the 2 o-rings into a TPU gasket which is more easy to mount. I've replaced the original EBB36 with a EBB42…
ResMed CPAP tubes last a long time if properly cared for. Unfortunately the rubber connectors on the ends perish and wear out before the flexible tubes do. These are not cheap, and replacements can take a while to turn up, so this print…
I need to head which include CPAP, goliath or chc xl, crossbow filament cutter, siboor cnc cariage and orbiter extruder, but cant find anything, so im doing by my own. Hotend fan and filament cutter placed backwards for space saving and…
Quick CPAP Backpack for E3NG users who are using CPAP. Made sure to include the .step file for anyone who would like to remix in any way. I attempted to make a silencer but all it really seems to do is restrict airflow.... Could be useful…
I designed this shelf to keep my CPAP machine and alarm clock organized on my nightstand while minimizing clutter. The top shelf supports the CPAP machine, while the lower shelf provides a dedicated space for an alarm clock or other small…
This is a remix of the BTT eco turbo / Roborock S51 turbo adapter. This is a cheap turbo motor that can be obtained for 6$ shipped off ali, and very powerful. My modification of the STL lets you use any 20mm id tube and has a very simple…
XOLcPAP UHF Ducts for direct fitting of the OD 18mm tube.
Fit any VCORE 3.0 or 3.1 with the Last L3ver M1 belt tensionner The installation is quite straightforward You can contact me at [email protected] if you encounter difficulties You will need: -M3x8mm countersunk -M3 inserts -M3…
I added 15mm of horizontal clearance so as to allow a toolboard at the toolhead.
I figured I would mock Apple's naming scheme a bit. Next version will be the Sprite Pro Plus Max This is a heavily modified sprite pro. I wanted speed and good cooling, without buying an entirely new toolhead. At this point I may as well…
Helps quick dry your hose after cleaning. Takes only a few minutes to fully dry the entire hose Prints quickly with no supports and little material usage. PLA ok for cool switch hair dryers. otherwise consider high temp pla, pet, etc.…
Keeps your CPAP hose off the bed, prevents tangling during sleep, and improves comfort by reducing pulling on the mask. ⚙ Its simple and functional design makes installation easy and ensures a secure fit on a 20 mm shelf without extra…
Title: IKEA MALM CPAP Hose Management Clip - Perfect Bedside Holder Tired of your CPAP hose pulling on your mask or getting tangled in your pillows? This custom-engineered clip is the perfect solution for users of the IKEA MALM bed…
This is a reimagined V-Core 4.1 toolhead designed to be SLM metal 3d printed. All of the important features remain identical to the original design... nozzle to Beacon offset, duct placing at the nozzle, belt attachment points... this is…
This project wouldn’t have been possible without the support of the CN3D community and partners like Polymaker & BIQU — thank you all! The CN3D Y-CPAP Toolhead is a compact, high-performance solution designed for serious airflow and…
4010 blower against CPAP
CPAP Nose Pillow Drying Rack (Dual Holder / Drain Stand) Keep your CPAP nose pillows clean, dry, and ready to use. This rack is designed to hold two nose pillows after washing, allowing water to fully drain and air to circulate for…
This changes the most recent version of the top link from 35mm wide bed trim to handle a 55mm wide bed edge. I added a retention screw hole and created a screw that pins one side of this bracket to the bed frame edge and a 3D printed bolt…
Here's a flap valve-gated, WS7040-powered CPAP blower for precise and powerful parts cooling! The WS7040 electronics are integrated right in the model, and the flap valve uses a Creality Ender 3 stepper motor that you might already have…
I designed this brand new fan duct because I found my Voron 2.4 with Stealth burner is seriously lack of cooling . Moreover, as I really found disassembling my print head from time to time is truly annoying and troublesome , I designed…
I hated all currently available designs for an ebb42 toolboard mount on EVA3 that uses CPAP cooling with an Orbiter 2.0. I didn't want to put a big piece of plastic on the back of the motor cause of cooling concerns. Having it off the…
Full parts list can be found on the original version of this model.
A very simple solution to hang your Philips Respironics CPAP mask and tube for them to dry correctly once you've rinced them. Only needs 2 srews 2.5 x 10 mm wood screws to hold on a standard EU curtain holder.
This is so you can connect two 22mm ("normal") CPAP hoses in case you need to extend them for some reason.
Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…
Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…
Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…
The CPAP hose can be very irritating. If you try to put the hose aside after use, it tends to slide down. This clip helps to hold it securely in place. It prints without supports. The lip is there to prevent accidental twisting because it…
The CPAP hose requires regular cleaning. However, drying it properly can be difficult, as a few drops of water always seem to get stuck somewhere. With these clips, up to four hoses with a diameter of 18mm can be hung to dry at the same…
Edit 9/6/25 - added options for 60mm fans. This model allows you to hook up a 40mm (or 60mm) fan to blow air through your CPAP hose to help dry it out. Hose end of adapter tapers from 22mm to 22.5mm and fan side holds a 40mm fan (screw…
The Voron Trident doesn't have a lot of head room above the Stealthburner unless you add a top hat. When I installed the CPAP Stealthburner for the Knomi v.2 my CPAP hose was pressing against the top acrylic and dragging causing many…
The Mellow CPAP blower is pretty loud, and has a high pitch whine to it. This silencer fixes it! It's designed if your blower is panel mounted, and sits right on the intake. I measured negligible CFM or airspeed losses, and it takes away…
For the NON-UHF stealthburner cover. I loved this original/remixed design that was able to use a 2-part PCB for the CPAP Stealthburner cover but I was unable to fit any heat set insert I had. The cpap hose adapter and stealthburner body…
For the UHF stealthburner cover with CPAP and two piece PCB I loved this original/remixed design that was able to use a 2-part PCB for the CPAP Stealthburner cover but I was unable to fit any heat set insert I had. The cpap hose adapter…
Remixed CPAP holder for panel (4mm) with Voron cut for use with Xiaomi-Roborock Nidec vacuum blower. https://github.com/condottab/Roborock-CPAP This is version for Monolith 5 mm rear protruded panel. You will need to adjust for default…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
Warning! This is a product of boredom and a novelty item only. Please ensure your mask is still properly fitted and providing proper airflow, especially if you have severe apnea. By downloading this model you agree to use this cosmetic…
Fumepack mod for the siboor trident with mounting for a cpap blower/driver and mounting for the biqu turbo fan kit.
I wanted a rear exhaust that worked with CPAP and also had a HEPA filter + carbon pellets. This is my solution to my own problem. Please let me know if you have any troubles printing this model at all. I haven't tried this design out for…
I removed the rubber end of the CPAP hose for another project. Remixed the adaptor piece to be able to connect the CPAP hose directly to the output. It is a bit smaller to allow the hose to fit directly. This adaptor is a tight fit to…
Adapter to use 15mm ID CPAP tube with the tube inlet from this model: Remote cooling for EVA 3 by Luka | Download free STL model | Printables.com
I updated this model to use M2x10 thread forming screws. This is completely a personal preference modification. If you want a full muffler and exhaust system please check out my page as it has all of this. Full Exhaust System:…
I have a Voron Trident and wanted to add CPAP to my Stealthburner with KNOMI 2. I am using the most recent Stealthburner + KNOMI face with CPAP that BTT released. I had some 22mm hose laying around and wanted to use it but everything is…
This CPAP adapter goes between the normal CPAP hose and mask. I printed this so that I would have an extra adapter. Category: Replacement Parts
I ran with a Tentacool nozzle duct for a while, but noticed it was lacking in flow. I also needed a new setup due to me using a BD Sensor M, so I started working on a new simple duct system for my Artsy printer. Which also made it work on…
A full redesign of my earlier 2020 CPAP hose bridge ( 2020 profile CPAP slim bridge by minilogique | Download free STL model | Printables.com ). Print as is, will need relatively well tuned supports, otherwise you just have to do some…
Couldn't find a replacement for a reasonable cost and shipping so I made one Made in tinkercad Print standing up without supports
NOTE: This is compatible with standard rubber hose connectors (default 22mm, but it is customizable). If using the Resmed Airmini, or other travel CPAPs with non-standard hose connectors, an adapter will need to be used. Introduction…
It's a support holding the CPAP tube on the bed headboard. It's my first print in place model where the support head moves. The model is set for a 18mm tube. As for the headboard it is 80mm wide. I'm including the freecad file, so feel…
Fan shroud for 15mm CPAP hose. You need to cut the rubber end off the CPAP hose and connect the raw hose directly to the inlet. Added custom beam and clamp to help secure the CPAP hose. Use 2x 6mm M3 screw to secure the clamp to the beam.…
This is a Dual 12mm RatRig V-Core CPAP Electronics Wire Guide Rear. If you have CPAP it is a must, as with the single version you could only attach the cpap tube.With this dual wiring guide you are able to mount both cpap and wiring…
18mm Cpap and no bus cable holder 40mm fan shroud
Information Original mod M3x18 x4 for holder halterung M3x5x4 x6 heat insert nut M3x12 x4 40mm fan M3x10 x2 solo duct Mantis mod M3x18 x4 for holder halterung M3x5x4 x10 heat insert nut M3x12 x4 40mm fan Other part M3x12 x4 3010fan 6x3mm…
Ventilated stand for Freedom 160 lithium ion battery that is often used to power travel CPAP machines. Battery can be mounted horizontally or vertically. Consider adding a small strip of shelf liner for added horizontal friction.
The Respironics M Series machines were usually docked to a humidifier accessory, and they were sold with a small plastic adapter for non-humidifier use, which often got lost. As these machines are very old, the parts and accessories are…
I had nowhere convenient to hang my CPAP hose and mask when not in use, so I made this. Designed to fit standard CPAP tubing, but slimline should work as well.
Hello! There is a modified backand toolhead mount to accomodate a CPAP cooling solution for the RatRig Toolhead on the VCore 4. It does require for the current plate to have the 4028 mounting part cut (cutting template included) as it…
Si te gusta el diseño déjame un like! Altura de capa: 0.2 Soportes: Si
A really simple model to stick on top of the on/off button on my ResMed AirSense 11 button and make it easier to press in the dark while half asleep. I used some old double-sided phone battery tape that I had laying around, but any…
This was a design with a few goals in mind - Mount a CPAP Fan to the Voron style exhaust filter insert used in Nadirs top hat for the SV08, intake fresh air from the exterior of the enclosure to improve part cooling when printing with…
Archetype breakneck mod for the lancer hotend, snakebite extruder flat mounted, carto/beacon and 15mm cpap hose. Including a revision of the snakebite with smooth bearing idler and bmg idler. Revamped hotend fan shroud to easily mount…
Clip for drying CPAP hose for AirSense11 hose. Designed to clip over a 10mm glass screen. Print without supports in PETG or PLA, .6mm Nozzle and .35 layer height. Version 1.1 Updated model with a support at the back to strengthen the clip.
This stealthburner model includes the mounting of a Phaetus Rapid 2 Plus UHF hotend and a CPAP for cooling, retaining the possibility of also mounting the Canbus if desired
Will need some supports in the slot portion. The rest of it prints without supports. PLA is fine, but PETG is probably a little better for durability where it connects to the inflator.
Print with support if you don't want to cut part of the connector. Works well without cutting. If you cut and print it please send a picture :). Good prints for you guys.
Temp fix for a broken magnetic clip on a ResMed CPA headgear. Glue on top of the remaining parts.
Bed headboard support for CPAP tube and mask. The tube can be easily moved to aid movement during sleep.
You can choose if you want cold air for maximum cooling performance while printing your sub 60 second benchy or if you want it a little more cozy for filaments that don't like it too cold. reduces noise levels significantly, doesn't…
I recently got the new BigTreeTech CPAP. the eco turbo kit. it's smaller than the original and more compact. I tried looking for a mount and nothing was out yet so had to make my own. Link to CPAP Fan I made a mount for the fan to replace…
prévoir isolant (laine de roche, autre) glue capot pour le kit biqu capot normal mettre isolant également dans le compartiment moteur remix autorisé pour vos voron et vzbot 0db
Now introducing the latest in the “Gondola” series of toolhead shrouds for SV08 - this time, for CPAP! Gondola v6 includes a mounting point for the Mintion Nozzle Cam and its PCB, plus two inward-facing “glow” LEDs and one down-facing…
Drying adapter I designed for the Resmed CPAP hose - fits shower fittings 20mm or less in diameter
Meet B.O.X.Y. short for B arely O verdesigned X -axis Y ielder. I love my Rook MK1 so much, but Rookery (albeit beautiful) won't hold an ABL probe and Sentinel is way too large. So I designed this toolhead from scratch. It's easy too…
Tested with 19mm hose. Likely works down to 17mm and up to 20mm. Paint on supports as shown. This is meant for a hose with the end cut off. Use a ziptie to secure the hose.
Nice fitting enclosure for CPAP fan driver.
This adapts the 7040 fan output to a 15mm tube commonly used in CPAP tubing (no rubber grommet)
The model is here: https://cad.onshape.com/documents/c9d373c6c20467bc5b088d7c/w/9b471f9dc9c50cbe2b0fe04f/e/22cba639be76768aec865a79 This 3D-printed adapter bridges the gap between a standard hairdryer (with a 45 mm diameter nozzle) and a…
I wanted to attach my adaptor to get it out of the floor, I attached it in the back of my night table.
I didn't like the split body of the original design, so I decided to combine them. It's mainly designed for VzBot235, but it works for VzBot330 as well but only if you use a spacer (which is also attached here). Use the right orientation…
Cpap duct with built in support made to be removed for easy printing. Uses a 97x97x32mm blower fan available on Amazon for 20$ or less. Look for a metal center on the fan or else it wont be the powerful version. These fans run up to 6amp…
M3x10 bolts and T-nuts for mounting. meant for 22mm OD/18mm ID CPAP hose. Print as oriented, use supports. 4 walls, 20% infill and well-tuned part cooling needed.
Everything you need to install the Silent Kit CPAP fan inside the S1 while drawing in outside air (not chamber air). Needed : 5 x M3x16mm Screws 5 x M3x5mmx4mm Threaded Inserts 6 x 5mm diameter x 3mm height Magnets 3 x M3 Flat Washers…
Replacement for the Respironics ComfortClassic nasal mask forehead spacer. Fits in the original slots. A 28cm x 20cm x 1cm foam needs to be cut out and glued to the printed piece to perform the same functions as the original piece.
This adapter allows for use of a remote fan to cool your V6 heatsink mounted on a Smart Effector. These two parts allow you to plug in the CPAP hose and direct the air towards the heatsink. The additional mounting points are for Berd Air…
![KP3S — Modular 5015 Fan Shroud — [STOCK] CPAP TUBE 15mm — Kingroon](https://media.printables.com/media/prints/1034260/images/7845825_caaaaf6f-a62d-423b-b46e-665f7307d731_08c93541-e169-4ac8-8f3a-7dffe75be502/unnamed.jpg)
