1 / 1
Resmed Airmini Adapter for standard CPAP hose (shorter)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows use of regular CPAP hose vs the fit packs that Resmed sells
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 286
- Wydruki
- 3
- Wyświetlenia
- 989
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (42)Powiązane
The original adapter here was unnecessarily long. To save space in my pack, I redesigned it in Fusion to be 18mm shorter. It also has some fillets and chamfers which make it less poky.
Print with the narrow side down. No supports needed. I used PETG, but PLA+ or ABS would also work. PLA might be too brittle for the flex capture.
Fusion 360 source included.
