Liczymy pasujące modele…
v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
I was inspired by the design @InverseInduct_233286 made for the AirSense 10 to make a bayonet adapter for the AirSense 11. While still in beta I've been using/testing this and it seems to work pretty well. I'm testing ABS prints now in…
The original model was great except that I hate drilling holes in my walls. Now you can mount your ResMed AirSense 11 CPAP to the wall using 3M Command Stips. I used the picture hanging strips that are rated for up to 20 LBS (9 KGS). This…
A replacement for the ResMed AirSense 10 filter door. This is modeled after the OEM door. Model has small tolerances, and is intended to be printed on a 4k (or higher resolution) resin printer. Suggest using Anycubic tough resin (or…
The original adapter here was unnecessarily long. To save space in my pack, I redesigned it in Fusion to be 18mm shorter. It also has some fillets and chamfers which make it less poky. Print with the narrow side down. No supports needed.…
I picked up an AirSense 10 as a backup to my AirSense 11 and set out to remix InverseInductor's AirSense 10 adapter: https://www.printables.com/@InverseInduct_ It didn't quite work out so I started from scratch and came up with this. I…
Case for ResMed CPAP air filters
This adapter replaces the standard part that connects the Resmed Airsense 10 heated hose to the headgear. I used Dreamware headgear as the model and designed this adapter from the end of each piece to replace a missing adapter. This may…
I got sick of my CPAP mask sliding up off my head every night because the headgear doesn't actually hold onto anything at the back of the head. This adjusts the angle downward so that the headgear can cradle the base of the skull and is…
This helps keep the tube out of my way while sleeping. Created in fusion 360. I've included the parametric files for remixing. Prints in place. Orient one of the ends on the build plate. I used supports but they're not really needed.
Last summer when I purchased the ResMed AirMini the head gear made specifically for the Mini was not available due to supply chain issues. So I made this adapter so that I could motorcycle camp and still get a good night sleep with my…
Headgear holder for ResMed AirFitF30i CPAP mask mountable with command strips. The back slot is designed to accept the reusable command strips to mount to a vertical surface.
A crude but functional replacement mask clip for Resmed Airfit CPAP masks. Print it off (I recommend SLA, but a well dialed-in FDM should be able to do it), super glue in a 6mm * 2mm disc magnet and strap it up! I whipped this up in…
Print upright - no supports needed - I printed with ABS - part cooling is necessary for the flanges to print properly. In multi material printers it might be good idea to print the tube connector (female) part with TPU and rest with ABS.…
Wanted a drill-less mounting option for my CPAP. Built this model to make use of Command Adhesive strips (4 standard is what I used, 2 on each bracket). It's been in place for more than a year stably and realized I hadn't published it…
This is a my 3D printable version of the Wall Mount Module for the ResMed AirMini CPAP Print Instructions Print in PETG Nozzle Diameter 0.4 mm Layer Height: 0.2 mm Perimeters : 3 Support in build plate only Overhang threshold: 40 degre XY…
An adapter for your AirMini tube to your Resmed AirFit CPAP Mask (Top-of-the-head tube design gives patients the freedom to sleep in many positions). This design allows you to use the HumidX pucks. I recommend to print this with 0.1 layer…
The model has breakable supports so no additional supports are needed. When you break the supports - make sure clean the surfaces very well to make fitting working properly. Use on your own risk. For example if you have AirSense11 - you…
@MVasilakis_835 's original design I remixed is very well done , I've used it for over a year now. Go check his out first, it might be exactly what you need. The style of 3M respirator filter I use is round and it hits the top of my…
I haven't tested this out yet but I will soon, I think it'll work better than the factory mount plate and will be much cheaper too since they don't sell them individually. I printed mine with PETG and supports are recommended.
I have a Prusa CoreOne +. I printed this with PLA, 3 perimeters, 15% infill, no supports. The print took 7 hours, so it was ready to use in the morning after an overnight print. I am adding a portable version of the water tank dryer that…
The clips on the N20 mask seem to crack and break after a while... yet the rest of the headgear is still in good shape. I harvested the neodymium magnets from the broken clips and epoxied them in. Make sure your glue does not get into the…
Allows you to use your ResMed climate line from an AirSense 11 on an AirMini. This will NOT heat the line, but its the hose you have, so the hose you use. Recommend printing with the ClimateLine end on the bottom, with supports.
This is a remix of CVS1401's Resmed N20 Mask Clip. Pocket sized for a harvested magnet from the original clip.
These models try to solve a problem with the transportation of the medical machine ResMed AirSense™ 10. The models serve as caps for the reservoir of the machine allowing to transport of said reservoir still with water, without spilling.…
This clip will hold a oxygen hose next to a ResMed APAP/CPAP hose used with a oxygen bleed in. Clip is 3 mmm thick and the hose for the oxygen is 6.5mm the CPAP hose is 18.5mm
I just brought a Resmed Airmini for travel and I couldn't get used to the N20 nose mask.
This is a hanger that perfectly fits the mask end of the hose. The mask is able to stay attached, and the whole thing hangs off the headboard of your bed. This allows for easy access and storage of the mask. I designed this in FreeCAD,…
This model can be use to hang the ResMed AirMini CPAP to a Dodge Grand Caravan coat hook What you need ResMed AirMini CPAP Wall Mount Module 2x M2x8 Hex Socket Head Cap Screws and Nuts Print Instructions Print in PETG Nozzle Diameter 0.4…
Keeps CPAP coupler together to stop middle of the night blasts of air that wake up you and your S.O. when the heater hose uncouples from the mask hose. allows rotation of mask hose for side sleepers that roll over through the night. PETG…
I found the hose for my AirMini too short in some instances. I designed this holder to hold the CPAP on the headboard by my head which allowed the hose to reach. I printed it in ABS just because I have lots of it but PLA should do just…
Here are two different knob styles that will replace the lighted knob on the ResMed AirCurve 10 or AirSense 10 machines. Supports are required for the center of the knob. The included files have paint on supports where needed. Turn on…
What is it? An adapter to allow the use of magnetic four-point headgear like from the ResMed F20, F30i, etc. on the Airfit P30i / N30i frame. Why? The back of my head is not well-shaped to retain the normal headgear for the ResMed…
I designed this clip to perfectly fit the ResMed hose to be able to snake it on the wall behind your bed. Print at 3 wall and 30% infil. Mountable with any drywall or floor screw. It will fit snugly with a satisfiying clic without…
Halterung für den ResMed Airsense 10 zur Montage unter einem Brett o.ä.
This is an adapter to connect a ResMed ClimateLineAir 11 tube to a garden hose outlet (the adapter is GHF). This is a solution to no known problem. Printing instructions Due to the shape of this model, supports are required. I have…
One of pieces of my ResMed F20 CPAP mask broke, and it was going to be a week before I could get a replacement. I took a picture of the one broken one, and traced it in F360. Its not perfect, its taller than the original, but it worked…
I wanted to attach my adaptor to get it out of the floor, I attached it in the back of my night table.
This started out as a way to rase my AirCurve 10 BiPap machine up about 15mm so I could use @MVasilakis_835 's 3M bayonet filter adapter with a round filter and keep the filter from touching the top of my nightstand. Go check his original…
Keeps CPAP coupler together to stop middle of the night blasts of air that wake up you and your S.O. when the heater hose uncouples from the mask hose. allows rotation of mask hose for side sleepers that roll over through the night. PETG…
I need some extra room to charge my phone on my bedside table where my CPAP machine lives. Designed an enclosure for the machine with full access to Power button , rear hose, menu and Tank removal. I can now safely sit my phone on top of…
Oil infusion hose adapter for use with essential oils (great during times of sickness). 22mm OD mask and hose compatible. Oil infusion pads cut to size from PM2.5 mask inserts- fit in slot perfectly. Add one or two drops of oil each use,…
I use my bedside CPAP machine to air-dry my AirMini hose and mask after cleaning. This adapter makes it easy to hook the hose on so it doesn't leak or pop off. You may need a little tape (I use blue painter's tape) inside the adapter to…
A joint for emergency repair of a broken CPAP hose, or to make your own hose extensions and adapters. Known to work with AirFit and Liberty tubes. Does not connect electrically heated tubing, but more effective than two feet of duct tape!…
We dropped the machine and the end of the hose was broken as can be seen in the photo. This cap fits on snug so that the silicon seals the hose air tight.
Originally I posted this to Thingiverse in 2016 This is a case designed to hold a 3 month supply of ResMed AirFit p10 Nasal Pillows. I may create other sizes as well. I printed in a flexible filament such as TPU but ABS/PLA should work as…
Non-magnetic Clip for a Resmed f20 CPAP frame. Print Settings Printer Brand: Bambulabs Printer: Bambu X1C **Rafts:** No Supports: No **Resolution:** 0.08mm layer Infill: 15% infill Category: Other
Partners Mask bracket kept breaking so I re designed it to be more suitable for 3d Printing Print in Petg or Abs at a high Infill for strength
This is a great, simple clip replacement for the attachments for this ResMed headgear. Printed and using it on mine with the salvaged magnet (seems to be about 10mm x 2mm). Slicing and printing tips: Requires 0.1 mm layers or the magnet…
The spiral tubing used CPAP and APAP machines tends to give way at the joins. ResMed tubing lasts a while, but the rubberised connector is glued on. So when the tube splits or breaks at the connector, you can't remove it and screw it back…
The 3mf file contains the optimal settings and support locations to avoid damaging the threads and support key areas based on numerous print tests. Manual settings: Material - PETG Perimeters - 3 Fill for all parts except the screw - 20%…
I had access to old used Resmed Airsense s10 CPAP machines that I tore apart to get to the turbine. Turns out they are these compact cylinder units which I have not seen any mounting mechanism for. It is a 3 phase without hall effect, but…
I wanted the ability to use a different filter than the 3M filter.
had access to old used Resmed Airsense s10 CPAP machines that I tore apart to get to the turbine. Turns out they are these compact cylinder units which I have not seen any mounting mechanism for. It is a 3 phase without hall effect, but…
I got tired of not being able to mount the airmini better when I travel. The travel mount kit for the Airmini is---lacking. Sometimes I'm in a hotel and I wake up with it on the floor because it got pulled off whatever I had set it on.…
My cpap mask has vents that blows directly forward from the face, which always blew right at my fiance's face and made her cold. So I made this vent director for the ResMed Mirage FX nasal cushion. This will change the air flow from the…
This project allows you to power a ResMed AirSense 10 CPAP machine using a DIY adapter that delivers the required 24V power and the correct 3.3V signal pin voltage . This setup is useful if you're building a portable power solution, using…
I upscaled the original maker's files after not finding a button cover to fit around the button of the Resmed Airsense 11 CPAP machine. This will cover the button to not allow any cats to press the button in the middle of the night!…
Bit rushed in the morning? Daily cleaning of the CPAP can be a chore. Grab the hose and rinse it while you’re in the shower anyway. Then, hang it from the shower cabinet, to dry on these hangers for later in the day. This bucket (whit…
Helps quick dry your hose after cleaning. Takes only a few minutes to fully dry the entire hose Prints quickly with no supports and little material usage. PLA ok for cool switch hair dryers. otherwise consider high temp pla, pet, etc.…
Cover to keep light out of room as S9 CPAP starts. Printed with filament change at 2mm height to glow in the dark to allow handle and lettering to glow. Just a gravity fit on top of screen to stop light pollution from machine. Simply lift…
I bought a Resmed Airmini, and I want to use it anywhere even if there's no power outlet nearby, such as on the train or in the car while taking a nap I bought a PD3.1 powerbank and a PD 24V trigger line, it's nice. But I couldn’t help…
Non-magnetic to Magnetic Adapter Clip for Resmed f20 CPAP Frame. The magnet is embedded. Make sure there is a pause before sealing the magnet space so you can add the magnet. Magnet is a 6x2mm Print Settings Printer Brand: Bambulabs…
Keep the bedroom dark when the machine starts up by placing the mask over the screen. It masks out all but the essential parts of the screen, leaving open those used for reading the results in the morning. Now using this, sneaking into…
Holder for ResMed on the wall with a holder for the mask and hose.
*NEU: *** Funktionierender Videolink am Ende *** Working video link at the end *** Das System besteht aus einem kugellagergeführten Schwenkarm, in den der CPAP Schlauch einfach eingelegt und zum reinigen wieder entfernt werden kann. Das…
I already had a Resmed AirSense 10 with F&P mask. As I am travelling quite frequently, I bought a Resmed AirMini. And for the price... you cannot use the masks you already have ! And I am not using the HumidX system. I found a few…
Print this part in TPU to have flexibility when inserting the harness holder.
This is a replacement clip for a ResMed CPAP mask. It uses a 12x3mm magnet. I printed mine in Petg. Designed in Sketchup.
This tiny print helps you to stove the P10 mask body to dry after washing. Use double sided tape to attach it to the wall etc. The position to use is as in the picture - also prints that way. Petg or ABS recommened but anything goes I…
ResMed CPAP tubes last a long time if properly cared for. Unfortunately the rubber connectors on the ends perish and wear out before the flexible tubes do. These are not cheap, and replacements can take a while to turn up, so this print…
Broke the magnetic side clip on my CPAP mask and decided i'd try and make a new one. After failing to scan the other side with photogrammetry, I just decided to use tinkercad to make my best approximation. I printed in TPU to avoid any…
I was having trouble getting my mask to drip dry so I designed a hook that uses medium 3m command strips that holds the N30i mask at one end so it will drip dry. I printed on its side in Elegoo Rapid PETG. 0.2 mm layer height tree…
This project includes a 3D-printable adapters that allow ResMed F30i/X30i headgear to be used with ResMed N30i/P30i masks . BOM: F30i/X30i Replacement Headgear compatible with ResMed CPAP masks Original attachment pieces from an X30i mask…
Backstory The older ResMed AirFit P10 headbands have small Headgear clips that are easily lost or pop off. This is an original attempt to re-create the clip so I can print when they get lost or break. Print Recommendations I printed it in…
ResMed CPAP tubes last a long time if properly cared for. Unfortunately the rubber connectors on the ends perish and wear out before the flexible tubes do. These are not cheap, and replacements can take a while to turn up, so this print…
I need some extra room to charge my phone on my bedside table where my CPAP machine lives. Designed an enclosure for the machine with full access to Power button , rear hose, menu and Tank removal. I can now safely sit my phone on top of…
Helps quick dry your hose after cleaning. Takes only a few minutes to fully dry the entire hose Prints quickly with no supports and little material usage. PLA ok for cool switch hair dryers. otherwise consider high temp pla, pet, etc.…
Backstory The older ResMed AirFit P10 headbands have small Headgear clips that are easily lost or pop off. This is an original attempt to re-create the clip so I can print when they get lost or break. Print Recommendations I printed it in…
My cpap mask has vents that blows directly forward from the face, which always blew right at my fiance's face and made her cold. So I made this vent director for the ResMed Mirage FX nasal cushion. This will change the air flow from the…
I haven't tested this out yet but I will soon, I think it'll work better than the factory mount plate and will be much cheaper too since they don't sell them individually. I printed mine with PETG and supports are recommended.
Elevate your sleep therapy experience with this specially designed adapter that bridges the Philips DreamWear Nasal CPAP mask with the Resmed CPAP machine hose. Engineered for a perfect fit, this adapter ensures a leak-free connection,…
