1 / 1
Replacement ResMed Spiral CPAP Tubing Connector — zdjęcie 1

Replacement ResMed Spiral CPAP Tubing Connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A coupling socket that screws on to broken ResMed CPAP spiral tubing (or hose) approx 23mm diameter.

Ocena
0 / 5
Polubienia
11
Pobrania
27
Wydruki
0
Wyświetlenia
317
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

The spiral tubing used CPAP and APAP machines tends to give way at the joins. ResMed tubing lasts a while, but the rubberised connector is glued on. So when the tube splits or breaks at the connector, you can't remove it and screw it back on the broken end.

With this one you can. It works with Liberty/AirFit masks and swivels, and inlet tubes etc. Bear in mind that you may have problems with electrically heated tubing because this model does not have a power socket.

It's quite a tight fit, at least on my printer, but you could glue it on with the compliant glue of your choice if you like - bearing in mind you don't want to inhale any nasty fumes! Because of the tight fit you'll have to persevere at screwing the tubing into the base of the model, and some judicious flexing may be required! On the plus side it won't come out again easily...

I print mine in TPU with organic PLA support to reduce the chance of the connector damaging the tubing, though it will work in just PLA or PETG without support if the connector is in a position that you won't sleep on.

Full source is provided in OpenSCAD format if you want to adjust the diameters for your printer or another manufacturer's tubing. Remixing is heartily encouraged.

If your rubber connector is just a bit loose rather than broken off, don't just chop it and replace with one of these. I've done a sleeve that tightens loose rubber sockets here:

If you have broken the tubing or want to splice two bits together, use this:

Tagi