1 / 3
ResMed AirCurve 10 AirSense 10 Knob — zdjęcie 1
1 / 3

ResMed AirCurve 10 AirSense 10 Knob

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement knob for ResMed AirCurve 10 and AirSense 10 machines

Ocena
4 / 5
Polubienia
6
Pobrania
50
Wydruki
0
Wyświetlenia
1162
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Here are two different knob styles that will replace the lighted knob on the ResMed AirCurve 10 or AirSense 10 machines.  

Supports are required for the center of the knob.  The included files have paint on supports where needed. Turn on support enforcers.

To replace the factory knob, remove the machine face plate (red circle on pic) then GENTLY remove the original knob.  It pulls straight off but may require slight “encouragement” with a tiny screwdriver to get it started.  Once removed, carefully push the new knob on and test fit the face plate.  If the face plate does not fit or if the knob drags on the plate, simply push the knob on a bit further.  Again, be careful.

 

Tagi