ResMed AirFit P10 Nasal Pillow Travel Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case designed to hold a 3 month supply of ResMed AirFit p10 Nasal Pillows. I may create other sizes as well.…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 720
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Originally I posted this to Thingiverse in 2016
This is a case designed to hold a 3 month supply of ResMed AirFit p10 Nasal Pillows. I may create other sizes as well. I printed in a flexible filament such as TPU but ABS/PLA should work as well. Depending on your printer calibration, the tolerances may be too tight and some sanding might be needed for the lid if printed in a hard plastic.
Update:
I have remade this in OpenSCAD to make it parametric and compatible with the Customizer. So you can change any perimeters you want by clicking Open in Customizer above. You can chage how many rows and columns you want! For those of you not familiar with OpenSCAD or Customizer, I have uploaded a 3 month supply size and a 2x2 size (4 holes) in the normal STL format.
Print Settings
Printer:
FlashForge Creator Pro 2016
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
Doesn't Matter (I used 20%)