Hefty Resmed CPAP Hose Coupler V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps CPAP coupler together while still allowing rotation (AirFit P10 Nasal Pillows Mask connection may fit others)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Keeps CPAP coupler together to stop middle of the night blasts of air that wake up you and your S.O. when the heater hose uncouples from the mask hose. allows rotation of mask hose for side sleepers that roll over through the night.
PETG works well, I use 100% infill and supports for the smaller diameter ends (designed to print vertically), both rings have a decent flat side at the end with the locking bump. All 4 parts required, though you could print 2 locking half bodies for less rotation when connecting together.
V2: Main Bodies work all good, rings don't positively lock in securely.
V3: https://www.printables.com/model/949657-hefty-resmed-cpap-hose-coupler-v3