Resmed Airsense 10 Wall Mounting Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to be ablet to wall mount my CPAP to organize things better and not need to drill holes in the wall to do it.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 740
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
Wanted a drill-less mounting option for my CPAP. Built this model to make use of Command Adhesive strips (4 standard is what I used, 2 on each bracket). It's been in place for more than a year stably and realized I hadn't published it yet. *note: after just over 2 years my command strips let go. No damage but you may want to look at better strips or change them out every 18 months to be safe.
Built it out of PETG with pretty standard 0.2mm slicer settings.
No supports needed so long as you put the top of the brackets on the build plate (part with screw holes and “toothed” edge). Uses socket head m4 to bolt things together (I had them on hand is why, they really just keep the plate locked to brackets, could be adjusted to use something different.). Pay attention to orientation of your command strips so you can be sure you will be able to remove this from the wall in the future. :)