ResMed F30i/X30i Headgear Adapter for N30i/P30i
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ResMed F30i/X30i Headgear Adapter for N30i/P30i
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This project includes a 3D-printable adapters that allow ResMed F30i/X30i headgear to be used with ResMed N30i/P30i masks.
BOM:
F30i/X30i Replacement Headgear compatible with ResMed CPAP masks
Original attachment pieces from an X30i mask
Optional:
Self-adhesive flannel fabric patch
Printing
Model is designed to be printed in TPU for flexibility.
p30i_x30iv1 - For AirFit headgear
airtouch_p30i_x30iv1 - For Airtouch headgear
Tips:
To minimize stringing, it is recommended to print one part at a time.
To avoid having the seam on the skin-contact side, manually place the seam as close as possible to the attachment point.
Use double side tape on the inside to minimize attachment to slide.
