Resmed Airtouch F20 basic magnetic clip replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A basic replacement clip for the magnetic side clip of a Resmed Airtouch F20 full face CPAP mask.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
Broke the magnetic side clip on my CPAP mask and decided i'd try and make a new one.
After failing to scan the other side with photogrammetry, I just decided to use tinkercad to make my best approximation.
I printed in TPU to avoid any issues with exact tolerances and I'm happy to say the clip made it through several nights working perfectly.
There's a recess inside the little dome for an 8x3 n52 magnet - there should be enough clearance to fit it in there + hot glue to hold it in (so you don't end up with the magnet sticking to the hotend)
PETG may also work but i've not tested the exact tolerances and TPU is plenty strong.